Środowiska pracy

From FreeCAD Documentation
Revision as of 08:03, 25 November 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

FreeCAD, jak wiele nowoczesnych programów projektowych jak Revit, bazuje na koncepcji Warsztatu (Workbench). Warsztat może być rozumiany jako zbiór narzędzi specjalnie zgrupowanych do określonego zadania. W tradycyjnym warsztacie meblowym, możesz mieć stół dla osoby pracującej w drewnie, inny dla kogoś pracującego z elementami metalowymi i może trzeci dla gościa, który składa to wszystko do kupy.

Ta sama koncepcja działa we FreeCADzie. Narzędzia pogrupowane są w warsztaty zależnie od odpowiadających im zadań.

Kiedy przełączasz się z jednego warsztatu do innego, zmianie ulega zestaw narzędzi dostępnych w interfejsie. Paski narzędzi, poleceń i ewentualnie inne części interfejsu przełączają się do nowego warsztatu, ale zawartość twojej sceny nie ulega zmianie. Możesz np. zacząć rysować szkice 2D w warsztacie Draft, potem pracując z nimi w warsztacie.

Note that sometimes a Workbench is referred to as a Module. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Built-in workbenches

Aktualnie mamy dostępne następujące Warsztaty:

  • The Arch Workbench for working with architectural elements.
  • The Complete Workbench hold all commands and features from all the modules and workbenches which met certain quality criteria. Deprecated in v0.17
  • The Draft Workbench contains 2D tools and basic 2D and 3D CAD operations.
  • The Drawing Workbench for displaying your 3D work on a 2D sheet.
  • The FEM Workbench provides Finite Element Analysis (FEA) workflow.

External workbenches

FreeCAD workbenches are easy to program in Python, there are therefore many people developing additional workbenches outside of the FreeCAD main developers.

The external workbenches page has some information and tutorials on some of them, and the FreeCAD Addons project aims at gathering them and making them easily installable from within FreeCAD.

Nowe warsztaty są w czasie tworzenia, bądź cierpliwy!

Property/pl
Mesh Module/pl