Tutorial Sfera traforată

From FreeCAD Documentation
Revision as of 23:18, 24 May 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Tutorial
Topic
Whiffle Ball (Part Module)
Level
Beginner
Time to complete
Authors
r-frank
FreeCAD version
0.16.6703
Example files
[1] Whiffle Ball
See also
None

Introducere

Acest tutorial este aici pentru a vă învăța cum se folosește Atelierul Part Module. Veți exersa:

  • inserare primitive geometrice
  • schimbarea valorilor primitivelor
  • utilizarea plasamentului
  • realizarea de operații booleene


Tip: Dacă ați selectat ceva greșit sau doriți doar să eliminați rapid totul,
doar faceți clic pe (OpenInventor Navigation-Style: CTRL-Click),

Model Final

Setarea formelor elementare

  1. Comuntați pe Modulul Piese Part Module
  2. Creați un nou document făcând click pe File New
  3. Inserați o casetă făcând click pe
  4. Asigurați-vă că ("cube") este selectat în vederea arborescentă
  5. Change the dimensions of the box (see data-tab) to
    1. Length= 90 mm
    2. Width= 90 mm
    3. Heigth= 90 mm
  6. Click into the value field of placement-row in data-tab so that ... appears on right side
  7. Click on ... to change the placement of the box
    1. X: -45 mm
    2. Y: -45 mm
    3. Z: -45 mm
  8. Click on OK to close dialog
  9. Insert box ("cube001") by clicking on
  10. Make sure the box ("cube001") is selected in tree view
  11. Change the dimensions of the box ("cube001") (see data-tab) to
    1. Length= 80 mm
    2. Width= 80 mm
    3. Heigth= 80 mm
  12. Change the placement of the box ("cube001") to
    1. X: -40 mm
    2. Y: -40 mm
    3. Z: -40 mm
  13. Click to insert a cylinder ("cylinder")
  14. Make sure the cylinder ("cylinder") is selected in tree view
  15. Change radius of cylinder to be 27,5 mm, change height to be 120 mm
  16. Change placement values of "cylinder" to be
    1. X: 0 mm
    2. Y: 0 mm
    3. Z: -60 mm
  17. Click to insert a cylinder ("cylinder001")
  18. Change radius of "cylinder001" to be 27,5 mm, change height to be 120 mm
  19. Choose Edit > Duplicate selection from the top menu to get another cylinder ("cylinder002")
  20. Make sure "cylinder001" is selected in tree view
  21. Change placement values of "cylinder001" to be
    1. Y: 60 mm
    2. Rotation axis with angle
    3. Axis: X
    4. Angle: 90°
  22. Click on OK to apply values and close dialog
  23. Make sure "cylinder002" is selected in tree view
  24. Change placement values of "cylinder001" to be
    1. X: -60 mm
    2. Rotation axis with angle
    3. Axis: Y
    4. Angle: 90°
  25. Click on OK to apply values and close dialog
  26. Click on to change to axometric view
  27. Click on to zoom to fit all
  28. Select "cube001", "cylinder", "cylinder001" and "cylinder002" and fuse them by clicking
  29. Select "cube" and "fusion", but make sure, that "cube" is selected FIRST
  30. Apply a boolean cut by clicking
  31. Forma de bază finalizată ar trebui să arate astfel:

The finished basic shape should look like this:

Scurtături partea 1

  1. Insert box ("cube002") by clicking on
  2. Change the dimensions of the box ("cube002") (see data-tab) to
    1. Length= 140 mm
    2. Width= 112 mm
    3. Heigth= 112 mm
  3. Change the placement of the box ("cube002") to
    1. X: -70 mm
    2. Y: -56 mm
    3. Z: -56 mm
  4. Insert box ("cube003") by clicking on
  5. Change the dimensions of the box ("cube003") (see data-tab) to
    1. Length= 180 mm
    2. Width= 180 mm
    3. Heigth= 180 mm
  6. Change the placement of the box ("cube003") to
    1. X: -90 mm
    2. Y: -90 mm
    3. Z: -90 mm
  7. Make sure "cube002" is selected in tree view, otherwise select it
  8. Choose Edit > Duplicate selection from the top menu to get another box ("cube004")
  9. Make sure "cube003" is selected in tree view, otherwise select it
  10. Choose Edit > Duplicate selection from the top menu to get another box ("cube005")
  11. Select "cube003" and "cube002", but make sure, that "cube003" is selected FIRST
  12. Activate menu to change placement
  13. Tick option "Apply incremental changes to object placement", notice that all values are reset ...
  14. Choose "Rotation: X-Axis" and "Angle: 45°" and click on Apply
  15. Choose "Rotation: Z-Axis" and "Angle: 45°" and click on Apply
  16. Click on OK to close the dialog
  17. Apply a boolean cut by clicking , the resulting object will be named "cut001"

Scurtături partea 2

  1. Selectați "cube005" and "cube004", dar asigurați-vă că "cube005" este PRIMUL selectat
  2. Activați meniul de schimbarea amplasament
  3. Bifați opțiunea "Apply incremental changes to object placement", notice that all values are resetted ...
  4. Alegeți "Rotation: X-Axis" și "Angle: 45°" apoi faceți clicl pe Apply
  5. alegeți "Rotation: Z-Axis" și "Angle: -45°" și click pe Apply
  6. Click pe OK pentru a închide dialogul
  7. Apicați boolean cut făcând click , obiectul rezultat va fi numit "cut002"
  8. Click pe pentru a schimba vederea axonometrică
  9. Click pe pentru a face prin zoom toate vizibile

Dacă totul a mers bine, modelul dvs. ar trebui să arate astfel:

If everything went well your model should look like this:

Finalizarea modelului

  1. Selectați "cut" și "cut001", dar asigurați-vă că "cut" este selectat PRIMUL
  2. Apicați boolean cut făcând click pe , obiectul rezultat va fi numit "cut003"
  3. Selectați "cut003" și "cut002", dar adigurați-vă, că "cut003" este ales primul
  4. Apicați boolean cut prin click pe , obiectul rezultat fa fi numit "cut004"
  5. Click pe pentru a schimba vederea axonometrică
  6. Click pe pentru ca prin zoom să le cuprindeți prin toate
  7. Nu uitați să vă dalvați fișierul...

Felicitări! Tocmai ați terminat cu succes acest tutorial!

Congratulations! You just finished this tutorial successfully!