User hub/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 48: Line 48:
* [[Image:Workbench_Part.svg|24px]] The [[Part Module/ro|Part Workbench]] for working with CAD parts.
* [[Image:Workbench_Part.svg|24px]] The [[Part Module/ro|Part Workbench]] for working with CAD parts.


* [[Image:Workbench_PartDesign.svg|24px]] The [[PartDesign Workbench/ro|Part Design Workbench]] for building Part shapes from sketches.
* [[Image:Workbench_PartDesign.svg|24px]] The [[PartDesign Workbench/ro|Atelierul Piese]] for building Part shapes from sketches.
* [[Image:Workbench_Path.svg|24px]] The [[Path_Workbench/ro|Path Workbench]] is used to produce G-Code instructions. It is still in a stage of development. Only basic functions in 0.16
* [[Image:Workbench_Path.svg|24px]] The [[Path_Workbench/ro|Atelierul Traiectorie]] is used to produce G-Code instructions. It is still in a stage of development. Only basic functions in 0.16
* [[Image:Workbench_Plot.svg|24px]] The [[Plot Module/ro|Plot Workbench]] is used to edit and save output plots created from other modules and tools.
* [[Image:Workbench_Plot.svg|24px]] The [[Plot Module/ro|Atelierul Plotare]] is used to edit and save output plots created from other modules and tools.
* [[Image:Workbench_Points.svg|24px]] The [[Points_Module/ro|Points Workbench]] for working with point clouds.
* [[Image:Workbench_Points.svg|24px]] The [[Points_Module/ro|Atelierul Nor de Puncte]] for working with point clouds.
* [[Image:Workbench_Raytracing.svg|24px]] The [[Raytracing Module/ro|Raytracing Workbench]] for working with ray-tracing (rendering)
* [[Image:Workbench_Raytracing.svg|24px]] The [[Raytracing Module/ro|Atelierul Randare]] for working with ray-tracing (rendering)


* [[Image:Workbench_Reverse_Engineering.svg|24px]] The [[Reverse Engineering Workbench/ro|Reverse Engineering Workbench]] is intended to give you specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still in development.
* [[Image:Workbench_Reverse_Engineering.svg|24px]] The [[Reverse Engineering Workbench/ro|Reverse Engineering Workbench]] is intended to give you specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still in development.

Revision as of 14:12, 2 September 2018

150
150

Această zonă este zona principală de ajutor pentru noii veniți la FreeCAD.

Rețineți că, la fel ca FreeCAD în sine, aceste pagini sunt în continuă dezvoltare. FreeCAD conține deja multe instrumente interesante pentru utilizatorul final, iar mai multe sunt adăugate în mod continuu, motiv pentru care în prezent există încă o documentație lipsă sau învechită pentru utilizatorul final.

But don't feel discouraged, browse the contents of this section, and, if you cannot find the information you need, don't hesitate to ask! Among the developers or in the small but growing FreeCAD users community, there will certainly be someone who can help you. You can leave comments related to this wiki documentation site on the FreeCAD help forum and ask your questions there.

And if you have some information you would like to appear here, why not contribute and help us make this manual grow. Head to the Help FreeCAD page, that will help you to get started.

If you would like to know how the development of FreeCAD has started years ago visit the History page.


Using FreeCAD

Introducere

Basic Application

Workbenches

These are the base workbenches bundled with every installation of FreeCAD:

External Workbenches

Power users have extended FreeCAD with various custom external workbenches, that are not integrated into the FreeCAD source code, but are easy to install on an existing FreeCAD installation. See here for an overview of the already available workbenches. For instructions how to install these workbenches refer to the tutorial How to install additional workbenches.

Macros

Power users have written various macros to enhance FreeCAD with more capabilities for a list of the macros refer to the page macros recipes. For instructions how to install the macros refer to the tutorial How to install macros.

Reference

Online Help

This is the official FreeCAD online help. Please note that the whole online help system is currently in rework. It will be used to generate a .CHM file, that will be distributed with the binary packages of FreeCAD. At the moment the online help summarizes some of the most complete sections of this wiki.

More

  • The Power users hub is the place to go if you would like to see more advanced use of FreeCAD
  • David is a very low cost 3D scanning system that can already work well with FreeCAD
  • Architecture workflow : An example of how FreeCAD can begin to have its preliminary place in an architecture workflow...
  • If you would like to help FreeCAD, head to the Help FreeCAD page.
  • The FreeCAD Community Portal lists projects made by community members around FreeCAD.
  • Don't understand a term or phrase as used in FreeCAD? Try the Glossary page.