Tutorials/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(82 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<languages/>
<languages/>

{{Docnav/es
|[[Frequently_asked_questions/es|PREGUNTAS FRECUENTES]]
|[[Interface_Customization/es|Personalización de la interfaz]]
}}

{{TOCright}}

<div class="mw-translate-fuzzy">
Esta página presenta una selección de tutoriales escritos de alta calidad. Una lista completa y sin clasificar de tutoriales se puede encontrar en [[:Category:Tutorials]], una completa y ordenable se puede encontrar en la [[Tutorials/es#Tutoriales - Lista completa|tabla de abajo]].

Visite también [[Video_tutorials/es|tutoriales de vídeo]] y [[Offsite_tutorials/es|tutoriales externos]] para ver los tutoriales alojados en sitios externos. Una fuente útil de tutoriales de vídeo es [https://YouTube.com YouTube].
</div>

<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Si quieres contribuir a escribir documentación y tutoriales del wiki, consulta las directrices generales del wiki en [[WikiPages/es|Páginas Wiki]],
Esta página presenta una selección de tutoriales escritos, ¡de ninguna manera está completa! Puede encontrar una lista de tutoriales completa y sin ordenar aquí: [[:Category:Tutorials/es]].
y leer las [[tutorial guidelines/es|Directrices del tutorial]].
   
También puede consultar [[Offsite tutorials/es]] y [[Video tutorials/es]] que enumeran enlaces a tutoriales alojados en sitios externos. Una fuente útil de videos tutoriales es, por supuesto, también una búsqueda por palabra clave ''FreeCAD'' en [https://YouTube.com YouTube].
</div>
</div>


Tenga en cuenta la versión de FreeCAD utilizada en el tutorial, ya que algunos tutoriales pueden utilizar una versión antigua del programa. Aunque el proceso de modelado general puede seguir funcionando, algunas herramientas pueden haber cambiado.
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in [[WikiPages]],
and read the [[tutorial guidelines]].


See also [[Video_tutorials|video tutorials]] and [[Books|books]].
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.


<span id="Architecture_and_BIM"></span>
==Arquitectura y BIM==
==Arquitectura y BIM==


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Arch tutorial 00.jpg|link=[[Arch tutorial]]|[[Arch tutorial]] <br/>Lo básico del modelado de arquitectura.
File:Arch tutorial 00.jpg|link=[[Arch tutorial]]|[[Arch tutorial]] (v0.14) <br/>Esta es la introducción esencial al Ambiente de trabajo Arquitectura. Es extensa y muestra un flujo de trabajo típico, desde la importación de planos en formato DXF hasta la construcción del modelo 3D.
File:Exercise arch 01.jpg|link=[[Manual:BIM_modeling]]|[[Manual:BIM_modeling|BIM modeling]] <br/>Cómo modelar una pequeña casa, producir un plano con TechDraw y exportar a IFC.
Arch_panel_tutorial_01.jpg|link=[[Arch panel tutorial]]|[[Arch panel tutorial]] <br/>Modelado de un panel de techo de una minicasa.
Exercise arch 01.jpg|link=[[Manual:BIM_modeling]]|[[Manual:BIM_modeling|BIM modeling]] <br/>Cómo modelar una casa pequeña y producir un plano.
File:11_T01_window_all_symbol_top.png|link=[[Tutorial for open windows/es]]|[[Tutorial for open windows/es|Ventanas y puertas abiertas]] (v0.18) <br/>Cómo mostrar ventanas y puertas abiertas, con símbolos de alzado y planta, y producir un plano básico con TechDraw.
File:17_T02_sketch_2_attached_correctly.png|link=[[Tutorial custom placing of windows and doors/es]]|[[Tutorial custom placing of windows and doors/es|Diseñar ventanas personalizadas]]. (v0.18) <br/>Cómo dibujar puertas y ventanas personalizadas usando el Sketcher, y ajustar sus normales para colocarlas correctamente en los muros.
File:Arch_panel_tutorial_01.jpg|link=[[Arch panel tutorial]]|[[Arch panel tutorial]] (v0.15) <br/>Modelando un panel de techo de microcasa utilizando el Sketcher, la herramienta Ventana y la herramienta Panel.
File:Arch_Wikihouse_01.jpg|link=[[Wikihouse porting tutorial/es]]|[[Wikihouse porting tutorial/es|Modelado de la WikiHouse]] <br/>Remodelación del proyecto WikiHouse utilizando bocetos y paneles, partiendo de la importación de un modelo de malla creado en SketchUp.
</div>
</div>
</gallery>
</gallery>


<span id="Modeling_parts"></span>
==Modelando Piezas==
==Modelado Piezas==


FreeCAD provides two main workflows to modeling parts:
FreeCAD provides two main workflows to modeling parts:
* combining objects, a method called [https://en.wikipedia.org/wiki/Constructive_solid_geometry constructive solid geometry (CSG)] using the [[Part Module|Part workbench]], and
* combining objects, a method called [[Constructive solid geometry|Constructive solid geometry]] (CSG) using the [[Part_Workbench|Part Workbench]], and
* using parametric modelling and [[Glossary#Feature|feature]] editing with the [[PartDesign Workbench]].
* using parametric modelling and [[Feature editing|feature editing]] with the [[PartDesign Workbench|PartDesign Workbench]].


Please note that the [[PartDesign Workbench]] workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
Please note that the [[PartDesign Workbench|PartDesign Workbench]] workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with Part WB]]|[[Creating_a_simple_part_with_Part_WB|Creating a simple part with Part Workbench]]<br/>An introduction to FreeCAD and Part Workbench using primitive solids.

PD WB Tutorial018.png|link=[[Basic Part Design Tutorial 017]]|[[Basic Part Design Tutorial 017|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with Draft and Part WB]]|[[Creating_a_simple_part_with_Draft_and_Part_WB|Creating a simple part with Draft and Part Workbench]]<br/>An introduction to modeling solids with Draft Workbench by creating a 2d profile in draft.
TBHS-model.png|link=[[Toothbrush Head Stand]]|[[Toothbrush Head Stand|Model an electric toothbrush head stand]] (v0.16)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.

Exercise lego 01.jpg|link=[[Manual:Modeling for product design]]|[[Manual:Modeling for product design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
File:GGTuto1 Vue.PNG|link=[[Creating a simple part with PartDesign]]|[[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]] (v0.17)<br/>An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
Exercise table complete.jpg|link=[[Manual:Traditional modeling, the CSG way]]|[[Manual:Traditional modeling, the CSG way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
Pd_tut_final_solid.png|link=[[Basic_Part_Design_Tutorial]]|[[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] (v0.17)<br/>Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
TutorialDraftShapeString_Complete.jpg|link=[[Draft ShapeString tutorial]]|[[Draft ShapeString tutorial]] (v0.16)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
Pd_tut_final_solid.png|link=[[Basic_Part_Design_Tutorial_019]]|[[Basic_Part_Design_Tutorial_019|Basic Part Design Tutorial 019]] (v0.19 or above)<br/>An updated version of the previous tutorial that creates the same model using techniques that avoid the [[Topological_naming_problem|topological naming problem]].
Tutorial WhiffleBall.jpg|link=[[Whiffle Ball tutorial]]|[[Whiffle Ball tutorial|Create a wiffle ball]] (v0.16)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
TBHS-model.png|link=[[Toothbrush_Head_Stand]]|[[Toothbrush_Head_Stand|Model an electric toothbrush head stand]] (v0.16 or above)<br/>Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
Exercise lego 01.jpg|link=[[Manual:Modeling_for_product_design]]|[[Manual:Modeling_for_product_design|Modeling for product design]] (v0.16)<br/>Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
Exercise table complete.jpg|link=[[Manual:Traditional_modeling,_the_CSG_way]]|[[Manual:Traditional_modeling,_the_CSG_way|Traditional modeling, the CSG way]]<br/>Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
08_T04_Part_ShapesString_Extrude_final_cut.png|link=[[Draft_ShapeString_tutorial]]|[[Draft_ShapeString_tutorial|Draft ShapeString tutorial]] (v0.19)<br/>Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
10_T03_Part_ball_fillet.png|link=[[Whiffle_Ball_tutorial]]|[[Whiffle_Ball_tutorial|Create a wiffle ball]] (v0.19)<br/>Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
Tutorial-normand06.jpg|link=[[Basic modeling tutorial]]|[[Basic_modeling_tutorial|Basic modeling tutorial]] <br/>Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
File:HTCaeroplane04.png|link=[[Aeroplane]]|[[Aeroplane|Aeroplane tutorial]] <br/>Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).
File:T13_14_Threads_components.png|link=[[Thread_for_Screw_Tutorial]]|[[Thread_for_Screw_Tutorial|Thread for screw tutorial]] (v0.19)<br/>Understand how to create threads with several techniques that include use of the tools [[Part_Helix|Part Helix]], [[PartDesign_AdditivePipe|PartDesign AdditivePipe]], [[Part_Sweep|Part Sweep]], [[Part_Fuse|Part Fuse]], and [[Part_Cut|Part Cut]].
</gallery>
</gallery>

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:
* [https://projects.raspberrypi.org/en/projects/freecad-dice freecad-dice], model a die with six faces, and optionally 3D print it.
* [https://projects.raspberrypi.org/en/projects/freecad-headphone-tidy freecad-headphone-tidy], model a spool to organize and store earphones, and optionally 3D print it.
* [https://projects.raspberrypi.org/en/projects/freecad-chess-set freecad-chess-set], model and entire chess set in Bauhaus modernist style.
* [https://github.com/raspberrypilearning?utf8=%E2%9C%93&q=freecad&type=source&language= raspberrypilearning] repository (CC-BY 4.0) with other examples.


==Drafting and Sketching ==
==Drafting and Sketching ==
Line 44: Line 74:
<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]] <br/>Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF.
Exercise cabin 01.jpg|link=[[Manual:Traditional 2D drafting]]|[[Manual:Traditional 2D drafting|Traditional 2D drafting]] <br/>Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF.
Draft_tutorial_result.png|link=[[Draft tutorial]]|[[Draft tutorial]] (v0.16) <br/>This is a basic introduction to the tools of the Draft Workbench: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring.
00_Dr01_Draft_Tutorial_final.png|link=[[Draft_tutorial]]|[[Draft tutorial]] (v0.19) <br/>This is a basic introduction to the tools of the [[Draft Workbench|Draft Workbench]]: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring.
Sketcher tutorial result.png|link=[[Sketcher tutorial]]|[[Sketcher tutorial]] (v0.16) <br/>This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius).
Sketcher_reference.png|link=[[Sketcher reference]]|[[Sketcher_reference|Sketcher reference]] (v0.18) <br/> This is a 70-page long PDF document that serves as a detailed manual for the [[Sketcher Workbench|Sketcher Workbench]]. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.
Constrain3.png|link=[[Sketcher Micro Tutorial - Constraint Practices]]|[[Sketcher Micro Tutorial - Constraint Practices|Sketcher micro tutorial]] (v0.16)<br/>Learn to efficiently constrain a sketch. Prefer geometric constraints over dimensional constraints.
09b_Sk01_Sketcher_fully_constrained_clean.png|link=[[Basic Sketcher Tutorial]]|[[Basic Sketcher Tutorial]] (v0.19) <br/>This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius).
03d_Sk02_Sketcher_Rectangle_constrained_length.png|link=[[Sketcher_Micro_Tutorial_-_Constraint_Practices]]|[[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher constraints practices]] (v0.19)<br/>Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.
</gallery>
</gallery>


<span id="Technical_Drawings"></span>
==Dibujo Técnico==
<div class="mw-translate-fuzzy">
</gallery>
== Dibujos Técnico ==
</div>


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]] (v0.17) <br/>This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view.
TDTut ProjGroup21.png|link=[[Basic TechDraw Tutorial]]|[[Basic TechDraw Tutorial|Basic TechDraw Tutorial]] (v0.17) <br/>This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view.
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]] (v0.17) <br/>Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields.
File:FCTemplateHow.png|link=[[TechDraw_TemplateHowTo]]|[[TechDraw_TemplateHowTo|Creating a new background template]] (v0.17) <br/>Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields.
File:AnHi1.png|link=[[Measurement Of Angles On Holes]]|[[Measurement Of Angles On Holes|Measurement Of Angles On Holes]] (v0.19) <br/> Instructions for adding center lines and subsequent angle representations on holes.
</gallery>
</gallery>


<span id="FEM"></span>
==FEM ==
== MEF ==


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|CalculiX cantilever FEM analysis]] (v0.17) <br/>This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.
FEM example01 pic00.jpg|link=[[FEM CalculiX Cantilever 3D]]|[[FEM CalculiX Cantilever 3D|CalculiX cantilever FEM analysis]] (v0.20) <br/>This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.

FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.17) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.20) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.

Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
</gallery>


Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
==CNC & 3D Printing ==


Two_balls_result_2-cropped.png|link=[[FEM_Example_Capacitance_Two_Balls]]|[[FEM_Example_Capacitance_Two_Balls|Electrostatic equation – Capacitance of two balls]] (v0.19)<br/>This example shows how to simulate a capacitance. It illustrates how to setup the example, study it's various parts, solve it using the [[FEM_SolverElmer|Elmer Solver]] and visualize the results using [[FEM_PostFilterClipRegion|Clip Filter]].
<gallery mode=packed heights=200px style="font-size:1.1em">

Path-WalkThroughResult.gif|link=[[Path Walkthrough for the Impatient]]|[[Path Walkthrough for the Impatient|Path Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
FEM_post-processing_Paraview.png|link=[[Post-Processing_of_FEM_Results_with_Paraview]]|[[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM results with Paraview]] (v0.19)<br/>This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
</gallery>
</gallery>


<span id="CNC_&amp;_3D_Printing"></span>
==Importar y Exportar ==
==CNC e impresión 3D ==


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
Path-WalkThroughResult.gif|link=[[CAM_Walkthrough_for_the_Impatient]]|[[CAM_Walkthrough_for_the_Impatient|CAM Workbench for the impatient]] <br/>This is a quick presentation of the workflow for the CAM Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
Dxf Importer Install 11.png|link=[[Dxf Importer Install]]|[[Dxf Importer Install|DXF importer installation]] <br/>Install the DXF importer program in you system, so that you can open DXF and DWG files with FreeCAD.
Exercise meshing 03.jpg|link=[[Manual:Preparing models for 3D printing]]|[[Manual:Preparing models for 3D printing|Preparing models for 3D printing]] (v0.16)<br/>Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the CAM Workbench to generate the G-code.
</gallery>
</gallery>


<span id="Rendering"></span>
==Renderizado ==
==Renderizado ==


Line 86: Line 127:
</gallery>
</gallery>


==Robot workbench ==

<div class="mw-translate-fuzzy">
==Entorno de trabajo de Robot ==
==Entorno de trabajo de Robot ==
</div>


<gallery mode=packed heights=200px style="font-size:1.1em">
<gallery mode=packed heights=200px style="font-size:1.1em">
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot tutorial]] (v0.17) <br/>Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
Robot Tutorial RobotSimulation.gif|link=[[Robot tutorial]]|[[Robot_tutorial|Robot tutorial]] (v0.17) <br/>Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
</gallery>
</gallery>


<span id="Scripting"></span>
== Plotting ==
== Guión ==
<gallery mode=packed heights=200px style="font-size:1.1em">

Plot_Trigonometric_Example.png|link=[[Plot Basic tutorial]]|[[Plot Basic tutorial|Basic plot]] <br/>Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot.
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
Plot_MultiAxes_Example.png|link=[[Plot MultiAxes tutorial]]|[[Plot MultiAxes tutorial|Multiaxes plot]] <br/>Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
* [[Python_scripting_tutorial|Python scripting tutorial]]
</gallery>
* [[How_to_install_macros|How to install macros]]
* [[How_to_install_additional_workbenches|How to install additional workbenches]]

== Tutorials - Comprehensive list ==

<div class="mw-translate-fuzzy">
== Tutoriales - Lista completa ==
Aquí están listados todos los tutoriales que no están en el manual '''independientemente de su calidad''''. Si un tutorial está listado en la [[:Category:Tutorials]] y no en esta tabla, por favor insértelo.
</div>

{| class="wikitable sortable"
|-
! Tutorial
! Topic
! Level
! Time to complete hh:mm
! Authors
! FreeCAD version
! Example files

<!-- Template for new entries
|-
| [[Tutorial|Tutorial]]
| Topic
| Level
| 0:00
| [[User:Name|Name]]
| 1.0
| None
-->

|-
| [[Add_Button_to_FEM_Toolbar_Tutorial|Add Button to FEM Toolbar Tutorial]]
| Finite Element Analysis
|
|
| [[User:JohnWang|JohnWang]]
|
|

|-
| [[Add_FEM_Constraint_Tutorial|Add FEM Constraint Tutorial]]
| Finite Element Analysis
|
|
| [[User:M42kus|M42kus]]
|
|

|-
| [[Add_FEM_Equation_Tutorial|Add FEM Equation Tutorial]]
| Finite Element Analysis
|
|
| [[User:JohnWang|JohnWang]]
|
|

|-
| [[Adding_a_new_mouse_navigation_option_to_FreeCAD|Adding a new mouse navigation option to FreeCAD (unfinished)]]
| Programming
| Advanced
|
| [[User:Kunda1|Kunda1]]
| 0.19.x
| None

|-
| [[Advanced_Attachment_OYX|Advanced Attachment OYX]]
| Attachment
| Intermediate/Advanced
|
| [[User:drmacro|drmacro]]
| 0.19
| None

|-
| [[Advanced_TechDraw_Tutorial|Advanced TechDraw Tutorial (unfinished)]]
| TechDraw Workbench
| Advanced
|
| [[User:domad|domad]]
| 0.19
| None

|-
| [[Aeroplane|Aeroplane]]
| Part Workbench
| Beginner
| 0:10
| Hughthecat
|
|

|-
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]]
| Finite Element Analysis
| Intermediate
| 1:00
| [[User:HarryvL|HarryvL]]
| 0.19 or above
|

|-
| [[Arch_panel_tutorial|Arch panel tutorial]]
| Arch Workbench
| Beginner
| 1:00
| Yorik
|
|

|-
| [[Arch_tutorial|Arch tutorial]]
| Modeling
| Intermediate
|
| [[User:Yorik|Yorik]]
| 0.14
|

|-
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]]
| Attachment
| Beginner/intermediate
| 1:00
| [[User:Bance|Bance]]
| 0.17 or above
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd]

|-
| [[Basic_modeling_tutorial|Basic modeling tutorial]]
| Modelling
| Beginner
| 0:15
| [[User:NormandC|NormandC]]
| Any
| None

|-
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]]
| Modeling
| Beginner
|
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]]
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17]

|-
| [[Basic_Part_Design_Tutorial_019|Basic Part Design Tutorial 019]]
| Modeling
| Beginner
| 1:00
| [[User:Onekk|Carlo Dormeletti]] and [[User:Edwilliams16|Ed Williams]]
| 0.19 or above
|

|-
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]]
| Sketcher Workbench
| Beginner
| 1:00
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]]
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ]

|-
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]]
| TechDraw Workbench
| Beginner
|
| [[User:WandererFan|WandererFan]]
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample]

|-
| [[BIM_ingame_tutorial|BIM ingame tutorial]]
| Arch Workbench
| Beginner
|
| [[User:Yorik|Yorik]]
|
|

|-
| [[CAM_Walkthrough_for_the_Impatient|CAM Walkthrough for the Impatient]]
| CAM Workbench
|
|
| Chrisb
|
|

|-
| [[Code_snippets|Code snippets]]
| Python
| Beginner
|
|
|
|

|-
| [[Creating_a_simple_part_with_Draft_and_Part_WB|Creating a simple part with Draft and Part WB]]
| Modeling
| Beginner
| 1:30
| Heda
| -
| -

|-
| [[Creating_a_simple_part_with_Part_WB|Creating a simple part with Part WB]]
| Modeling
| Beginner
| 2:00
| Heda
| -
| -

|-
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]]
| Modeling
| Beginner
| 1:00
| GlouGlou
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Creating_a_simple_PartDesign_Body.FCStd Creating a simple PartDesign Body.FCStd]

|-
| [[Customize_Toolbars|Customize Toolbars]]
| Customization
| Beginner
| 0:05
| [[User:Mario52|Mario52]]
| Any
| None

|-
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]]
| Product Design
| Beginner
| 0:30
| r-frank and vocx
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Draft_Shapestring_Tutorial_Examples/Draft_Shapestring_Tutorial_Text.FCStd?raw=true Draft_Shapestring_Text]

|-
| [[Draft_tutorial|Draft tutorial]]
| Draft Workbench
| Beginner
| 0:30
| [[User:Drei|Drei]] and vocx
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated]

|-
| [[Engine_Block_Tutorial|Engine Block Tutorial]]
| Part Workbench
| Beginner
| 1:00
| Andrewbuck40
| 0.14.3700
|

|-
| [[Example_Combined_Footing|Example Combined Footing]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Having_LShape_Rebars_Reinforcement_Mesh|Example Slab Having LShape Rebars Reinforcement Mesh]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Having_Mesh_Of_Straight_Rebars|Example Slab Having Mesh Of Straight Rebars]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Having_UShape_Rebars_Reinforcement_Mesh|Example Slab Having UShape Rebars Reinforcement Mesh]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Spanning_in_One_Direction|Example Slab Spanning in One Direction]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Example_Slab_Spanning_in_Two_Directions|Example Slab Spanning in Two Directions]]
| Reinforcement Workbench
| Intermediate
|
| [[User:Shiv_Charan|Shiv Charan]]
| 0.20
| None

|-
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]]
| Export
| Beginner
| 0:20
| r-frank
| 0.16.6703
|

|-
| [[Extend_FEM_Module|Extend FEM Module]]
| Finite Element Analysis
|
|
| [[User:M42kus|M42kus]]
|
|

|-
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]]
| Finite Element Analysis
| Beginner
| 0:10
| [[User:Bernd|Bernd]]
| 0.16.6377 or above
|

|-
| [[FEM_Example_Capacitance_Two_Balls|FEM Example Capacitance Two Balls]]
| Finite Element Analysis
| Beginner
|
| [[User:Sudhanshu Dubey|Sudhanshu Dubey]]
| 0.19
| None

|-
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]]
| Finite Element Analysis
| Beginner/Intermediate
| 0:30
| [[User:HarryvL|HarryvL]]
| 0.17.12960 or above
|

|-
| [[FEM_tutorial|FEM tutorial]]
| Finite Element Analysis
| Beginner
| 0:10
| [[User:Drei|Drei]]
| 0.17 or above
|

|-
| [[FEM_Tutorial_Python|FEM Tutorial Python]]
| Finite Element Analysis
| Intermediate
| 0:30
| [[User:Bernd|Bernd]]
| 0.18.15985 or above
|

|-
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]]
| Ship Workbench
| Beginner
|
|
|
|

|-
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]]
| Ship Workbench
| Beginner
|
|
|
|

|-
| [[How_to_install_additional_workbenches|How to install additional workbenches]]
| Programming
| Medium programmer
| 0:15
| [[User:R-frank|r-frank]]
| Any
| None

|-
| [[How_to_install_macros|How to install macros]]
| Programming
| Medium programmer
| 0:15
| [[User:Mario52|Mario52]]
| Any
| None

|-
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
| Import
| Beginner
| 0:30
| r-frank
| 0.16.6703
|

|-
| [[Import_OpenSCAD_code|Import OpenSCAD code]]
| Import
| Beginner
| 0:30
| r-frank
| 0.16.6704
| None

|-
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]]
| Import
| Beginner
| 0:30
| r-frank
| 0.16.6704
|

|-
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]]
| Arch Workbench
| Advanced
| 2:00
| Pablo Gil
|
|

|-
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]]
| TechDraw Workbench
| Beginner
| 0:01
| AnHi
| 0.19
|

|-
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]]
| Product design
| Beginner
| 1:00
| NormandC
|
|

|-
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]]
| Product design
| Beginner
| 1:00
| NormandC
|
|

|-
| [[PartDesign_tutorial|PartDesign tutorial]]
| Sketcher Workbench
| Beginner
| 0:15
| [[User:Drei|Drei]]
| 0.16 or above
|

|-
| [[Plot_Basic_tutorial|Plot Basic tutorial]]
| Plot Workbench
| Beginner
|
|
|
|

|-
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]]
| Plot workbench
| Intermediate
|
|
|
|

|-
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]]
| Finite Element Analysis
| Intermediate
| 2:00
| [[User:HarryvL|HarryvL]]
| 0.19
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall]

|-
| [[Private_Preference_Packs|Private Preference Packs]]
| Customization
| Intermediate/Advanced
|
| [[User:Drmacro|drmacro]]
| 1.0 or above
|

|-
| [[Python_scripting_tutorial|Python scripting tutorial]]
| Programming
| Intermediate
|
|
|
|

|-
| [[Raytracing_tutorial|Raytracing tutorial]]
| Raytracing Workbench
| Beginner
| 0:10
| [[User:Drei|Drei]]
| 0.16 or above
|

|-
| [[Robot_6-Axis|Robot 6-Axis]]
| Robot Workbench
| Intermediate
|
|
|
|

|-
| [[Robot_tutorial|Robot tutorial]]
| Robot Workbench
| Beginner
|
| r-frank
|
|

|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]]
| Python
| Beginner
| 0:30
| r-frank
| 0.16.6706
|

|-
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]]
| Python
| Beginner
| 0:30
| r-frank
| 0.16.6706
|

|-
| [[Scripts|Scripts]]
| Python
| Beginner
|
| onekk Carlo
| 0.19
|

|-
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]]
| Sketcher Workbench
| Beginner
| 0:30
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices]

|-
| [[Sketcher_reference|Sketcher reference]]
| Sketcher Workbench
|
|
|
|
|

|-
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]]
| Sketcher Workbench
| Beginner
|
| [[User:Maker|Maker]]
|
| None

|-
| [[Sketcher_Tutorial|Sketcher Tutorial]]
| Sketcher Workbench
| Beginner
|
| Ulrich
|
|

|-
| [[TechDraw_HowTo_Page|TechDraw HowTo Page]]
| TechDraw Workbench
|
|
|
| 0.19
| None

|-
| [[TechDraw_Pitch_Circle_Tutorial|TechDraw Pitch Circle Tutorial]]
| TechDraw Workbench
| Beginner
| 0:10
| Andergrin
| 0.19
| None

|-
| [[TechDraw_TemplateGenerator|TechDraw TemplateGenerator]]
| TechDraw Workbench
| Intermediate
|
| [[User:FBXL5|FBXL5]]
| 0.19
| None

|-
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]]
| TechDraw Workbench
| Intermediate
| 1:00
| wandererfan
| 0.17
| None

|-
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]]
| Product design
| Advanced
| 1:00
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx
| 0.19
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial]

|-
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]]
| Modeling
| Beginner
| 1:00
| [[User:EmmanuelG|EmmanuelG]]
| 0.16 or above
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310]

|-
| [[Topological_data_scripting|Topological data scripting]]
| Programming
| Intermediate
|
|
|
|

|-
| [[Transient_FEM_analysis|Transient FEM analysis]]
| Finite Element Analysis
|
|
|
|
|

|-
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]]
| Arch Workbench
| Intermediate
| 1:00
| [[User:Vocx|Vocx]]
| 0.18 or above
| None

|-
| [[Tutorial_for_open_windows|Tutorial for open windows]]
| Arch Workbench
| Beginner
| 1:00
| [[User:Vocx|Vocx]]
| 0.18 or above
| None

|-
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]]
| Raytracing Workbench
| Intermediate
| 2:00
| [[User:Vocx|Vocx]]
| 0.18 or above
| None

|-
| [[Tutorial_KinematicAssembly|Tutorial KinematicAssembly]]
| Assembly3 Workbench
| Beginner
| 0:30
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None

|-
| [[Tutorial_KinematicController|Tutorial KinematicController]]
| Programming
| Intermediate
| 1:00
| [[User:FBXL5|FBXL5]]
| 0.20 or above
| None

|-
| [[Tutorial_KinematicSkeleton|Tutorial KinematicSkeleton]]
| Assembly3 Workbench
| Intermediate
| 0:40
| [[User:FBXL5|FBXL5]]
| 0.20
| None

|-
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]]
| Rendering
| Intermediate
| 1:00
| [[User:Vocx|Vocx]]
| 0.18 or above
| None

|-
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]]
| Robot Workbench
| Intermediate
|
|
| 0.11.4252ppa1
|

|-
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]]
| Product design
| Beginner
| 0:30
| r-frank and vocx
| 0.17 or above
| [https://github.com/FreeCAD/Examples/blob/master/Whiffle_Ball_Tutorial_ExampleFiles/WhiffleBall_Tutorial_FCWiki.FCStd?raw=true WhiffleBall_Tutorial_FCWiki.FCStd]

|-
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]]
| Import
| Intermediate/Advanced
| 1:00
|
|
|

|}


== Drawings ==
{{VeryImportantMessage|Development of the [[Drawing Workbench]] stopped in FreeCAD 0.16. Consider using the [[TechDraw Workbench]] instead.}}
<gallery mode=packed heights=200px style="font-size:1.1em">
Drawing_tutorial_result.png|link=[[Drawing tutorial]]|[[Drawing tutorial]] (v0.16)<br/>This is the essential introduction to the tools of the Drawing Workbench to create blueprints.
Exercise drawing 01.jpg|link=[[Manual:Generating 2D drawings]]|[[Manual:Generating 2D drawings|Generating 2D drawings]] (v0.16)<br/>Generate 2D projections of your 3D models, and add dimensions.
</gallery>


{{Docnav/es
{{docnav|List of Commands|Interface Customization}}
|[[Frequently_asked_questions/es|PREGUNTAS FRECUENTES]]
|[[Interface_Customization/es|Personalización de la interfaz]]
}}


{{Userdocnavi{{#translation:}}}}
[[Category:Tutorials/es]]
[[Category:User Documentation/es]]
[[Category:Tutorials{{#translation:}}]]

Latest revision as of 09:18, 18 March 2024

Other languages:

Esta página presenta una selección de tutoriales escritos de alta calidad. Una lista completa y sin clasificar de tutoriales se puede encontrar en Category:Tutorials, una completa y ordenable se puede encontrar en la tabla de abajo.

Visite también tutoriales de vídeo y tutoriales externos para ver los tutoriales alojados en sitios externos. Una fuente útil de tutoriales de vídeo es YouTube.

Si quieres contribuir a escribir documentación y tutoriales del wiki, consulta las directrices generales del wiki en Páginas Wiki, y leer las Directrices del tutorial.

Tenga en cuenta la versión de FreeCAD utilizada en el tutorial, ya que algunos tutoriales pueden utilizar una versión antigua del programa. Aunque el proceso de modelado general puede seguir funcionando, algunas herramientas pueden haber cambiado.

See also video tutorials and books.

Arquitectura y BIM

  • Arch tutorial (v0.14) Esta es la introducción esencial al Ambiente de trabajo Arquitectura. Es extensa y muestra un flujo de trabajo típico, desde la importación de planos en formato DXF hasta la construcción del modelo 3D.

    Arch tutorial (v0.14)
    Esta es la introducción esencial al Ambiente de trabajo Arquitectura. Es extensa y muestra un flujo de trabajo típico, desde la importación de planos en formato DXF hasta la construcción del modelo 3D.

  • BIM modeling Cómo modelar una pequeña casa, producir un plano con TechDraw y exportar a IFC.

    BIM modeling
    Cómo modelar una pequeña casa, producir un plano con TechDraw y exportar a IFC.

  • Ventanas y puertas abiertas (v0.18) Cómo mostrar ventanas y puertas abiertas, con símbolos de alzado y planta, y producir un plano básico con TechDraw.

    Ventanas y puertas abiertas (v0.18)
    Cómo mostrar ventanas y puertas abiertas, con símbolos de alzado y planta, y producir un plano básico con TechDraw.

  • Diseñar ventanas personalizadas. (v0.18) Cómo dibujar puertas y ventanas personalizadas usando el Sketcher, y ajustar sus normales para colocarlas correctamente en los muros.

    Diseñar ventanas personalizadas. (v0.18)
    Cómo dibujar puertas y ventanas personalizadas usando el Sketcher, y ajustar sus normales para colocarlas correctamente en los muros.

  • Arch panel tutorial (v0.15) Modelando un panel de techo de microcasa utilizando el Sketcher, la herramienta Ventana y la herramienta Panel.

    Arch panel tutorial (v0.15)
    Modelando un panel de techo de microcasa utilizando el Sketcher, la herramienta Ventana y la herramienta Panel.

  • Modelado de la WikiHouse Remodelación del proyecto WikiHouse utilizando bocetos y paneles, partiendo de la importación de un modelo de malla creado en SketchUp.

    Modelado de la WikiHouse
    Remodelación del proyecto WikiHouse utilizando bocetos y paneles, partiendo de la importación de un modelo de malla creado en SketchUp.

Modelado Piezas

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:

Drafting and Sketching

  • Traditional 2D drafting Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF.

    Traditional 2D drafting
    Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF.

  • Draft tutorial (v0.19) This is a basic introduction to the tools of the Draft Workbench: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring.

    Draft tutorial (v0.19)
    This is a basic introduction to the tools of the Draft Workbench: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring.

  • Sketcher reference (v0.18) This is a 70-page long PDF document that serves as a detailed manual for the Sketcher Workbench. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.

    Sketcher reference (v0.18)
    This is a 70-page long PDF document that serves as a detailed manual for the Sketcher Workbench. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.

  • Basic Sketcher Tutorial (v0.19) This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius).

    Basic Sketcher Tutorial (v0.19)
    This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius).

  • Sketcher constraints practices (v0.19) Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.

    Sketcher constraints practices (v0.19)
    Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.

</gallery>

Dibujos Técnico

  • Basic TechDraw Tutorial (v0.17) This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view.

    Basic TechDraw Tutorial (v0.17)
    This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view.

  • Creating a new background template (v0.17) Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields.

    Creating a new background template (v0.17)
    Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields.

  • Measurement Of Angles On Holes (v0.19) Instructions for adding center lines and subsequent angle representations on holes.

    Measurement Of Angles On Holes (v0.19)
    Instructions for adding center lines and subsequent angle representations on holes.

MEF

  • CalculiX cantilever FEM analysis (v0.20) This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.

    CalculiX cantilever FEM analysis (v0.20)
    This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.

  • Simple FEM introduction (v0.20) This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.

    Simple FEM introduction (v0.20)
    This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.

  • FEM shear analysis of a composite block (v0.17) Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.

    FEM shear analysis of a composite block (v0.17)
    Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.

  • Analysis of reinforced concrete with FEM (v0.19) Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.

    Analysis of reinforced concrete with FEM (v0.19)
    Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.

  • Electrostatic equation – Capacitance of two balls (v0.19) This example shows how to simulate a capacitance. It illustrates how to setup the example, study it's various parts, solve it using the Elmer Solver and visualize the results using Clip Filter.

    Electrostatic equation – Capacitance of two balls (v0.19)
    This example shows how to simulate a capacitance. It illustrates how to setup the example, study it's various parts, solve it using the Elmer Solver and visualize the results using Clip Filter.

  • Post-Processing of FEM results with Paraview (v0.19) This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.

    Post-Processing of FEM results with Paraview (v0.19)
    This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.

CNC e impresión 3D

  • CAM Workbench for the impatient This is a quick presentation of the workflow for the CAM Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.

    CAM Workbench for the impatient
    This is a quick presentation of the workflow for the CAM Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.

  • Preparing models for 3D printing (v0.16) Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the CAM Workbench to generate the G-code.

    Preparing models for 3D printing (v0.16)
    Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the CAM Workbench to generate the G-code.

Renderizado

  • Creating renderings Quickly produce a rendered image of your bodies with POV-Ray and LuxRender, if they are installed in your system.

    Creating renderings
    Quickly produce a rendered image of your bodies with POV-Ray and LuxRender, if they are installed in your system.

  • Raytracing tutorial (v0.16) Describes the basic workflow of the Raytracing Workbench using POV-Ray or LuxRender: set the path to the renderers, create a project, set the camera position, select the model, run the renderer.

    Raytracing tutorial (v0.16)
    Describes the basic workflow of the Raytracing Workbench using POV-Ray or LuxRender: set the path to the renderers, create a project, set the camera position, select the model, run the renderer.

  • Intermediate FreeCAD and POV-ray tutorial (v0.18) Workflow to produce a better render with POV-Ray: create a project, add objects, set the camera, save the .pov file, manually edit the file to improve the textures, planes, lights, and then run the renderer.

    Intermediate FreeCAD and POV-ray tutorial (v0.18)
    Workflow to produce a better render with POV-Ray: create a project, add objects, set the camera, save the .pov file, manually edit the file to improve the textures, planes, lights, and then run the renderer.

  • Rendering a FreeCAD assembly with Blender (v0.18) Export bodies from FreeCAD to Wavefront .obj, import the file into Blender, set up a simple Sun light, assign basic materials with the Principled BSDF shader, and produce a rendered image with EEVEE and Cycles.

    Rendering a FreeCAD assembly with Blender (v0.18)
    Export bodies from FreeCAD to Wavefront .obj, import the file into Blender, set up a simple Sun light, assign basic materials with the Principled BSDF shader, and produce a rendered image with EEVEE and Cycles.

Robot workbench

Entorno de trabajo de Robot

  • Robot tutorial (v0.17) Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.

    Robot tutorial (v0.17)
    Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.

Guión

These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.

Tutorials - Comprehensive list

Tutoriales - Lista completa

Aquí están listados todos los tutoriales que no están en el manual independientemente de su calidad'. Si un tutorial está listado en la Category:Tutorials y no en esta tabla, por favor insértelo.

Tutorial Topic Level Time to complete hh:mm Authors FreeCAD version Example files


Add Button to FEM Toolbar Tutorial Finite Element Analysis JohnWang
Add FEM Constraint Tutorial Finite Element Analysis M42kus
Add FEM Equation Tutorial Finite Element Analysis JohnWang
Adding a new mouse navigation option to FreeCAD (unfinished) Programming Advanced Kunda1 0.19.x None
Advanced Attachment OYX Attachment Intermediate/Advanced drmacro 0.19 None
Advanced TechDraw Tutorial (unfinished) TechDraw Workbench Advanced domad 0.19 None
Aeroplane Part Workbench Beginner 0:10 Hughthecat
Analysis of reinforced concrete with FEM Finite Element Analysis Intermediate 1:00 HarryvL 0.19 or above
Arch panel tutorial Arch Workbench Beginner 1:00 Yorik
Arch tutorial Modeling Intermediate Yorik 0.14
Basic Attachment Tutorial Attachment Beginner/intermediate 1:00 Bance 0.17 or above Basic Attachment Tutorial.FCStd
Basic modeling tutorial Modelling Beginner 0:15 NormandC Any None
Basic Part Design Tutorial Modeling Beginner Mark Stephen (Quick61) and HarryGeier 0.17 or above Basic Part Design for v0.17
Basic Part Design Tutorial 019 Modeling Beginner 1:00 Carlo Dormeletti and Ed Williams 0.19 or above
Basic Sketcher Tutorial Sketcher Workbench Beginner 1:00 Drei and Vocx 0.19 Basic Sketcher tutorial
Basic TechDraw Tutorial TechDraw Workbench Beginner WandererFan 0.17 or above Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample
BIM ingame tutorial Arch Workbench Beginner Yorik
CAM Walkthrough for the Impatient CAM Workbench Chrisb
Code snippets Python Beginner
Creating a simple part with Draft and Part WB Modeling Beginner 1:30 Heda - -
Creating a simple part with Part WB Modeling Beginner 2:00 Heda - -
Creating a simple part with PartDesign Modeling Beginner 1:00 GlouGlou 0.17 or above Creating a simple PartDesign Body.FCStd
Customize Toolbars Customization Beginner 0:05 Mario52 Any None
Draft ShapeString tutorial Product Design Beginner 0:30 r-frank and vocx 0.17 or above Draft_Shapestring_Text
Draft tutorial Draft Workbench Beginner 0:30 Drei and vocx 0.19 Draft tutorial updated
Engine Block Tutorial Part Workbench Beginner 1:00 Andrewbuck40 0.14.3700
Example Combined Footing Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having LShape Rebars Reinforcement Mesh Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having Mesh Of Straight Rebars Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Having UShape Rebars Reinforcement Mesh Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Spanning in One Direction Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Example Slab Spanning in Two Directions Reinforcement Workbench Intermediate Shiv Charan 0.20 None
Export to STL or OBJ Export Beginner 0:20 r-frank 0.16.6703
Extend FEM Module Finite Element Analysis M42kus
FEM CalculiX Cantilever 3D Finite Element Analysis Beginner 0:10 Bernd 0.16.6377 or above
FEM Example Capacitance Two Balls Finite Element Analysis Beginner Sudhanshu Dubey 0.19 None
FEM Shear of a Composite Block Finite Element Analysis Beginner/Intermediate 0:30 HarryvL 0.17.12960 or above
FEM tutorial Finite Element Analysis Beginner 0:10 Drei 0.17 or above
FEM Tutorial Python Finite Element Analysis Intermediate 0:30 Bernd 0.18.15985 or above
FreeCAD-Ship s60 tutorial Ship Workbench Beginner
FreeCAD-Ship s60 tutorial (II) Ship Workbench Beginner
How to install additional workbenches Programming Medium programmer 0:15 r-frank Any None
How to install macros Programming Medium programmer 0:15 Mario52 Any None
Import from STL or OBJ Import Beginner 0:30 r-frank 0.16.6703
Import OpenSCAD code Import Beginner 0:30 r-frank 0.16.6704 None
Import text and geometry from Inkscape Import Beginner 0:30 r-frank 0.16.6704
Import/Export IFC - compiling IfcOpenShell Arch Workbench Advanced 2:00 Pablo Gil
Measurement Of Angles On Holes TechDraw Workbench Beginner 0:01 AnHi 0.19
PartDesign Bearingholder Tutorial I Product design Beginner 1:00 NormandC
PartDesign Bearingholder Tutorial II Product design Beginner 1:00 NormandC
PartDesign tutorial Sketcher Workbench Beginner 0:15 Drei 0.16 or above
Plot Basic tutorial Plot Workbench Beginner
Plot MultiAxes tutorial Plot workbench Intermediate
Post-Processing of FEM Results with Paraview Finite Element Analysis Intermediate 2:00 HarryvL 0.19 Beam and wall
Private Preference Packs Customization Intermediate/Advanced drmacro 1.0 or above
Python scripting tutorial Programming Intermediate
Raytracing tutorial Raytracing Workbench Beginner 0:10 Drei 0.16 or above
Robot 6-Axis Robot Workbench Intermediate
Robot tutorial Robot Workbench Beginner r-frank
Scripted Parts: Ball Bearing - Part 1 Python Beginner 0:30 r-frank 0.16.6706
Scripted Parts: Ball Bearing - Part 2 Python Beginner 0:30 r-frank 0.16.6706
Scripts Python Beginner onekk Carlo 0.19
Sketcher Micro Tutorial - Constraint Practices Sketcher Workbench Beginner 0:30 Mark Stephen (Quick61) and vocx 0.19 Sketcher Constraints practices
Sketcher reference Sketcher Workbench
Sketcher requirement for a sketch Sketcher Workbench Beginner Maker None
Sketcher Tutorial Sketcher Workbench Beginner Ulrich
TechDraw HowTo Page TechDraw Workbench 0.19 None
TechDraw Pitch Circle Tutorial TechDraw Workbench Beginner 0:10 Andergrin 0.19 None
TechDraw TemplateGenerator TechDraw Workbench Intermediate FBXL5 0.19 None
TechDraw TemplateHowTo TechDraw Workbench Intermediate 1:00 wandererfan 0.17 None
Thread for Screw Tutorial Product design Advanced 1:00 DeepSOIC, Murdic, vocx 0.19 Updated: Thread for screw tutorial
Toothbrush Head Stand Modeling Beginner 1:00 EmmanuelG 0.16 or above Thingiverse 2403310
Topological data scripting Programming Intermediate
Transient FEM analysis Finite Element Analysis
Tutorial custom placing of windows and doors Arch Workbench Intermediate 1:00 Vocx 0.18 or above None
Tutorial for open windows Arch Workbench Beginner 1:00 Vocx 0.18 or above None
Tutorial FreeCAD POV ray Raytracing Workbench Intermediate 2:00 Vocx 0.18 or above None
Tutorial KinematicAssembly Assembly3 Workbench Beginner 0:30 FBXL5 0.20 or above None
Tutorial KinematicController Programming Intermediate 1:00 FBXL5 0.20 or above None
Tutorial KinematicSkeleton Assembly3 Workbench Intermediate 0:40 FBXL5 0.20 None
Tutorial Render with Blender Rendering Intermediate 1:00 Vocx 0.18 or above None
VRML Preparation for Robot Simulation Robot Workbench Intermediate 0.11.4252ppa1
Whiffle Ball tutorial Product design Beginner 0:30 r-frank and vocx 0.17 or above WhiffleBall_Tutorial_FCWiki.FCStd
Wikihouse porting tutorial Import Intermediate/Advanced 1:00


User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Tutorials/es&oldid=1384245"