Difference between revisions of "Tutorials"

From FreeCAD Documentation
Jump to: navigation, search
(Internal links to Constructive solid geometry (CSG) and feature editing)
(Analysis of reinforced concrete with FEM Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.)
Line 90: Line 90:
 
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.17) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.
 
FEM tutorial result.png|link=[[FEM tutorial]]|[[FEM tutorial|Simple FEM introduction]] (v0.17) <br/>This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.
 
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
 
Figure 11 Deformed Mesh.png|link=[[FEM Shear of a Composite Block]]|[[FEM Shear of a Composite Block|FEM shear analysis of a composite block]] (v0.17) <br/>Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
 +
Femconcrete_Wall_3D_rx_PSS.png|link=[[Analysis_of_reinforced_concrete_with_FEM]]|[[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] (v0.19) <br/>Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
 
</translate>
 
</translate>
 
</gallery>
 
</gallery>

Revision as of 05:29, 12 September 2019

Other languages:
български • ‎čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎Bahasa Indonesia • ‎italiano • ‎한국어 • ‎polski • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎

This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in Category:Tutorials.

Visit offsite tutorials and video tutorials for lists of tutorials hosted on external sites. A useful source of video tutorials is YouTube.

If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.

Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.

Architecture and BIM

Modeling Parts

FreeCAD provides two main workflows to modeling parts:

Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.

Drafting and Sketching

Technical Drawings

FEM

CNC & 3D Printing

Import and Export

Rendering

Robot workbench

Plotting

Drawings

Development of the Drawing Workbench stopped in FreeCAD 0.16. Consider using the TechDraw Workbench instead.