Troubleshooting models

From FreeCAD Documentation
Revision as of 03:14, 9 December 2018 by Patn (talk | contribs) (Created page with " == Intro == This page is to help find solutions to problems that can occur across multiple commands. Errors specific to a certain command should be put on the appropriate wik...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Intro

This page is to help find solutions to problems that can occur across multiple commands. Errors specific to a certain command should be put on the appropriate wiki page for the command.

Part Turns Black

  • Cause: Faces that should be on inside are on outside
  • Resolution: Try creating part using commands in a different order

Part Design Command will not complete with Not Contiguous Solid error

  • Cause: Part Design commands only work with continuous body
  • Solution: Create sepereate body if there should be space between bodies or check that sketches are at least flush with existing body.

FreeCAD crashes while creating fillets or chamfers

  • Cause: OCC bug that causes a crash when an invalid fillet or chamfer is attempted
  • Solution: Change radius to valid value