Translations:Sketcher Dialog/7/en

From FreeCAD Documentation
Revision as of 10:10, 15 July 2019 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

There are two solver messages options:

Name Description
Auto Remove Redundants If checked, new created constraints that would be redundant to the existing constraints will automatically be removed. The removal will be silent for constrains that are not dimensional.
Note: For dimensional redundant constraints you will be informed that the new constraint is invalid, no matter if you use Auto Remove Redundants or not.
Auto Update If checked, the whole document will be recomputed after every sketch action. The advantage is that if you e.g. edit the sketch of a pocket, you will see the effect immediately. The disadvantage is that it takes a long time for complex documents. Thus disable the option if editing sketches gets slow.