Translations:Sketcher Dialog/16/en

Name	Description
Show Grid	If checked, a grid will be shown.
Grid size	The distance between two subsequent grid lines. Note that the default value of 0 mm will result in a 10 mm grid.
Grid snap	If checked, new points will snap to the nearest grid line. Note that the points have already to be close to a grid line that the snap takes effect. The distance is a fifth of the value set for Grid size, so for a 10 mm grid, the snapping only occurs if the point is not more than 2 mm away from a grid line. Note: A snapped point has no coincident constraint with the grid point it snapped to.
Auto constraints	If checked, the sketcher proposes automatically sensible constraints. If you draw for example a polyline and point towards the bottom, you will see that the sketcher proposes a vertical constraint:. If you set now a point the drawn line segment will get the vertical constraint.
Avoid redundant auto constraints	If checked, the sketcher tries not to propose redundant auto constraints. This option only has an effect if also the option Auto constraints is used.
Rendering order	The order how sketches are rendered. To change it, drag and drop a geometry type to the top or bottom.