Translations:Path ToolLibraryEdit/6/zh

From FreeCAD Documentation
Revision as of 01:47, 9 May 2019 by Renoxray (talk | contribs) (Created page with "# 选择Path Job # Press the {{KEY|16px Tool Manager}} button # Create new tools or adjust the properties of exi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. 选择Path Job
  2. Press the Path ToolLibraryEdit.png Tool Manager button
  3. Create new tools or adjust the properties of existing tools.
    Set at least the diameter, FreeCAD needs it to calculate the radius compensation. As of version 0.17 this is the only value used for path creation. However, if you wish to use the simulation tool later, add cutting edge angle and cutting edge height as well.
    Path-ToolAdd.gif