== Options == {  [[File:PartConeProperty_en.png]]  {{KEYCone}} *Radius 1  radius of the arc or circle defining the lower face *Radius 2  radius of the arc or circle defining the upper face *Height  the height of the Part Cone *Angle  the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
+
== Options ==
+
{
+
 [[File:PartConeProperty_en.png]]
+

+
{{KEYCone}}
+
*Radius 1  radius of the arc or circle defining the lower face
+
*Radius 2  radius of the arc or circle defining the upper face
+
*Height  the height of the Part Cone
+
*Angle  the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
+
}
Revision as of 09:37, 25 July 2014
Options
Cone
Radius 1  radius of the arc or circle defining the lower face
Radius 2  radius of the arc or circle defining the upper face
Height  the height of the Part Cone
Angle  the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.