Translations:Part Cone/10/en: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
== Options == {| | [[File:PartConeProperty_en.png]] | {{KEY|Cone}} *Radius 1 - radius of the arc or circle defining the lower face *Radius 2 - radius of the arc or circle defining the upper face *Height - the height of the Part Cone *Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii. |
|||
== Volby == |
|||
{| |
|||
| [[File:PartConeProperty_en.png]] |
|||
| |
|||
{{KEY|Cone}} |
|||
*Radius 1 - poloměr oblouku nebo kružnice definující spodní plochu |
|||
*Radius 2 - poloměr oblouku nebo kružnice definující vrchní plochu |
|||
*Výška - výška kuželu |
|||
*Úhel - počet stupňů oblouku nebo kružnice definující horní a dolní plochu zkráceného kuželu. Defaultních 360 stupňů vytváří kruhovou plochu, menší hodnota vytvoří část kuželu definovoanou horní a dolní plochou s okraji definovanými obloukem o velikosti dané úhlem a oběma poloměry. |
Revision as of 18:53, 14 July 2014
== Options == {| | | Cone *Radius 1 - radius of the arc or circle defining the lower face *Radius 2 - radius of the arc or circle defining the upper face *Height - the height of the Part Cone *Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.