(One intermediate revision by one other user not shown)
Line 1:
Line 1:
−
== Options == {| | [[File:PartConeProperty_en.png]] | {{KEY|Cone}} *Radius 1 - radius of the arc or circle defining the lower face *Radius 2 - radius of the arc or circle defining the upper face *Height - the height of the Part Cone *Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
+
== Options ==
+
{|
+
| [[File:PartConeProperty_en.png]]
+
|
+
{{KEY|Cone}}
+
*Radius 1 - radius of the arc or circle defining the lower face
+
*Radius 2 - radius of the arc or circle defining the upper face
+
*Height - the height of the Part Cone
+
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
+
|}
Latest revision as of 21:31, 12 September 2014
Options
Cone
Radius 1 - radius of the arc or circle defining the lower face
Radius 2 - radius of the arc or circle defining the upper face
Height - the height of the Part Cone
Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
