Translations:Part Cone/10/en: Difference between revisions

Revision as of 20:31, 12 September 2014

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Part Cone)

== Properties ==

Options

Cone

Radius 1 - radius of the arc or circle defining the lower face
Radius 2 - radius of the arc or circle defining the upper face
Height - the height of the Part Cone
Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.

@@ Line 1: / Line 1: @@
-== Volby ==
+== Options ==
 {|
 | [[File:PartConeProperty_en.png]]
 |
 {{KEY|Cone}}
-*Radius 1 - poloměr oblouku nebo kružnice definující spodní plochu
+*Radius 1 - radius of the arc or circle defining the lower face
-*Radius 2 - poloměr oblouku nebo kružnice definující vrchní plochu
+*Radius 2 - radius of the arc or circle defining the upper face
+*Height - the height of the Part Cone
-*Výška - výška kuželu
+*Angle -  the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
-*Úhel -  počet stupňů oblouku nebo kružnice definující horní a dolní plochu zkráceného kuželu. Defaultních 360 stupňů vytváří kruhovou plochu, menší hodnota vytvoří část kuželu definovoanou horní a dolní plochou s okraji definovanými obloukem o velikosti dané úhlem a oběma poloměry.
+|}