Translations:Manual:Traditional 2D drafting/23/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "* 现在开始摆放一些家具。首先,从左上角绘制一个矩形,放好一个厨房台面,给出 170cm 的宽度和 -60cm 的高度。在下图中,矩形的 ''...")
 
No edit summary
Line 1: Line 1:
* 现在开始摆放一些家具。首先,从左上角绘制一个矩形,放好一个厨房台面,给出 170cm 的宽度和 -60cm 的高度。在下图中,矩形的 '''Transparency''' 属性设置为 80%,让它看起来像个漂亮的家具。
* 现在开始摆放一些家具。首先,从左上角绘制一个矩形,放好一个厨房台面,给出 170cm 的宽度和 -60cm 的高度。在下图中,矩形的 '''Transparency''' 属性设置为 80%,让它看起来像个漂亮的家具。
* 然后,添加一个水槽和一个灶台。手工绘制这些符号可能非常繁琐,通常很容易在互联网上找到它们,例如在http://www.cad-blocks.net。在页面底部的 '''Downloads''',为方便起见,我们从这个项目中提取了一个水槽和一个灶台,并将它们保存为 DXF 文件。你可以访问下面的链接来下载这两个文件,右键单击 '''Raw''' 按钮,然后 '''另存为'''。
* 然后,添加一个水槽和一个灶台。手工绘制这些符号可能非常繁琐,通常很容易在互联网上找到它们,例如在http://www.cad-blocks.net。在页面底部的 '''Downloads''',为方便起见,我们从这个项目中提取了一个水槽和一个灶台,并将它们保存为 DXF 文件。你可以访问下面的链接来下载这两个文件,右键单击 '''Raw''' 按钮,然后 '''另存为'''。
* 将 DXF 文件插入打开的 FreeCAD 文档有两种方法,可以选择 '''File -> Import''' 菜单选项,也可以将 DXF 文件从文件浏览器拖放到 FreeCAD 窗口中来完成。DXF 文件的内容可能不会出现在当前视图的中心,具体取决于它们在DXF 文件中的位置。可以使用菜单 '''View -> Standard views -> Fit all''' 适当缩放,看到导入的对象。插入两个 DXF 文件,将它们移动到厨房台面上的适当位置。
* 将 DXF 文件插入打开的 FreeCAD 文档有两种方法,可以选择 '''File Import''' 菜单选项,也可以将 DXF 文件从文件浏览器拖放到 FreeCAD 窗口中来完成。DXF 文件的内容可能不会出现在当前视图的中心,具体取决于它们在DXF 文件中的位置。可以使用菜单 '''View Standard views Fit all''' 适当缩放,看到导入的对象。插入两个 DXF 文件,将它们移动到厨房台面上的适当位置。

Revision as of 09:27, 6 April 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Traditional 2D drafting)
* We can now start placing some furniture. To begin with, let's place a counter by drawing a rectangle from the upper left inner corner, and giving it a width of 170cm and a height of -60cm. In the image below, the '''Transparency''' property of the rectangle is set to 80%, to give it a nice furniture look.
* Then let's add a sink and a cookertop. Drawing these kinds of symbols by hand can be very tedious, and they are usually easy to find on the internet, for example on http://www.cad-blocks.net . In the '''Downloads''' section below, for convenience, we separated a sink and a cookertop from this project, and saved them as DXF files.You can download these two files by visiting the links below, and right-clicking the '''Raw''' button, then choosing '''save as'''.
* Inserting a DXF file into an opened FreeCAD document can be done either by choosing the '''File → Import''' menu option, or by dragging and dropping the DXF file from your file explorer into the FreeCAD window. The contents of the DXF files might not appear right on the center of your current view, depending on where they were in the DXF file. You can use menu '''View → Standard views → Fit all''' to zoom out and find the imported objects. Insert the two DXF files, and move them to a suitable location on the tabletop:
  • 现在开始摆放一些家具。首先,从左上角绘制一个矩形,放好一个厨房台面,给出 170cm 的宽度和 -60cm 的高度。在下图中,矩形的 Transparency 属性设置为 80%,让它看起来像个漂亮的家具。
  • 然后,添加一个水槽和一个灶台。手工绘制这些符号可能非常繁琐,通常很容易在互联网上找到它们,例如在http://www.cad-blocks.net。在页面底部的 Downloads,为方便起见,我们从这个项目中提取了一个水槽和一个灶台,并将它们保存为 DXF 文件。你可以访问下面的链接来下载这两个文件,右键单击 Raw 按钮,然后 另存为
  • 将 DXF 文件插入打开的 FreeCAD 文档有两种方法,可以选择 File → Import 菜单选项,也可以将 DXF 文件从文件浏览器拖放到 FreeCAD 窗口中来完成。DXF 文件的内容可能不会出现在当前视图的中心,具体取决于它们在DXF 文件中的位置。可以使用菜单 View → Standard views → Fit all 适当缩放,看到导入的对象。插入两个 DXF 文件,将它们移动到厨房台面上的适当位置。