Translations:Manual:Modeling for product design/6/zh-cn: Difference between revisions

Revision as of 10:16, 10 April 2019

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Manual:Modeling for product design)

We will now use exclusively the [[Sketcher_Workbench|Sketcher]] and [[PartDesign_Workbench|PartDesign]] tools. Since all the tools from the Sketcher Workbench are also included in the Part Design Workbench, we can stay in Part Design and we will not need to switch back and forth between the two.

这里专门使用 Sketcher 和 PartDesign 工具。由于Sketcher 工作台中的所有工具都包含在 PartDesign 工作台里了，我们可以就在 PartDesign 中工作，不需要在两者之间来回切换。

Revision as of 10:14, 10 April 2019 (view source) Johnquicker (talk \| contribs) (Created page with "我们现在将专门使用 Sketcher 和 PartDesign 工具。由于Sketcher 工作台中的所有工具都包含在 PartDesign 工...")		Revision as of 10:16, 10 April 2019 (view source) Johnquicker (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	~~我们现在将~~专门使用 [[Sketcher_Module\|Sketcher]] 和 [[PartDesign_Workbench\|PartDesign]] 工具。由于Sketcher 工作台中的所有工具都包含在 PartDesign 工作台里了，我们可以就在 PartDesign 中工作，不需要在两者之间来回切换。		这里专门使用 [[Sketcher_Module\|Sketcher]] 和 [[PartDesign_Workbench\|PartDesign]] 工具。由于Sketcher 工作台中的所有工具都包含在 PartDesign 工作台里了，我们可以就在 PartDesign 中工作，不需要在两者之间来回切换。