Translations:Manual:All workbenches at a glance/12/de: Difference between revisions
No edit summary |
No edit summary |
||
Line 33: | Line 33: | ||
| Zeichnet ein Rechteck aus 2 gegenüberliegenden Punkten |
| Zeichnet ein Rechteck aus 2 gegenüberliegenden Punkten |
||
| [[Image:Sketcher_CreateTriangle.png|32px]] [[Sketcher_CreateTriangle/de|Dreieck]] |
| [[Image:Sketcher_CreateTriangle.png|32px]] [[Sketcher_CreateTriangle/de|Dreieck]] |
||
| Zeichnet ein regelmäßiges Dreieck, einbeschrieben in einen Kreis der Konstruktionsgeometrie |
| Zeichnet ein regelmäßiges Dreieck, einbeschrieben in einen Kreis der Konstruktionsgeometrie |
||
|- |
|- |
||
| [[Image:Sketcher_CreateSquare.png|32px]] [[Sketcher_CreateSquare/de|Viereck]] |
| [[Image:Sketcher_CreateSquare.png|32px]] [[Sketcher_CreateSquare/de|Viereck]] |
Revision as of 20:45, 19 January 2020
Werkzeug | Beschreibung | Werkzeug | Beschreibung |
---|---|---|---|
Punkt | Zeichnet einen Punkt | Linie | Zeichnet einen Linienabschnitt aus zwei Punkten |
Bogen | Zeichnet ein Bogensegment aus Mittelpunkt, Radius, Startwinkel und Endwinkel | Bogen 3 Punkte | Zeichnet ein Bogensegment aus zwei Endpunkten und einem weiteren Punkt auf dem Umfang |
Kreis | Zeichnet einen Kreis aus Mittelpunkt und Radius | Kreis 3 Punkte | Zeichnet einen Kreis aus drei Punkten auf dem Umfang |
Ellipse | Zeichnen einer Ellipse, bestimmt von Mittelpunkt und je einem Endpunkt der beiden Ellipsenachsen | Ellipse 3 Punkte | Zeichnet eine Ellipse nach Hauptdurchmesser (2 Punkte) und Nebenradiuspunkt |
Ellipsenbogen | Zeichnet einen Ellipsenbogen nach Mittelpunkt, Hauptradiuspunkt, Start- und Endpunkt | Polylinie | Zeichnet eine Linie, die aus mehreren Liniensegmenten besteht. Mehrere Zeichenmodi verfügbar |
Rechteck | Zeichnet ein Rechteck aus 2 gegenüberliegenden Punkten | Dreieck | Zeichnet ein regelmäßiges Dreieck, einbeschrieben in einen Kreis der Konstruktionsgeometrie |
Viereck | Zeichnet ein regelmäßiges Viereck, einbeschrieben in einen Kreis der Konstruktionsgeometrie | Fünfeck | Zeichnet ein regelmäßiges Fünfeck, einbeschrieben in einen Kreis der Konstruktionsgeometrie |
Sechseck | Zeichnet ein regelmäßiges Sechseck, einbeschrieben in einen Kreis der Konstruktionsgeometrie | Siebeneck | Zeichnet ein regelmäßiges Siebeneck, einbeschrieben in einen Kreis der Konstruktionsgeometrie |
Achteck | Zeichnet ein regelmäßiges Achteck, einbeschrieben in einen Kreis der Konstruktionsgeometrie | Slot | Zeichnen eines Ovals, vom Mittelpunkt, einem Halbkreis und dem äußersten Punkt des anderen Halbkreises bestimmt |
Fillet | Erzeugen einer Rundung an einer von zwei Linien gebildeten Ecke | Trimming | Kürzen einer Linie, eines Kreises oder eines Bogens mithilfe einer/s überlagernden Linie, Kreises oder Bogens |
External geometry | Creates an edge linked to external geometry | Construction mode | Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation and is only visible while editing the Sketch that contains it |
Point on point | Affixes a point onto (coincident with) one or more other points. | Point on object | Affixes a point onto another object such as a line, arc, or axis. |
Vertical | Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint. | Horizontal | Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint. |
Parallel | Constrains two or more lines parallel to one another. | Perpendicular | Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint. |
Tangent | Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. | Equal length | Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal. |
Symmetric | Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. | Lock | Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item |
Horizontal distance | Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. | Vertical distance | Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin. |
Distance | Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. | Radius | Defines the radius of a selected arc or circle by constraining the radius. |
Internal anglr | Defines the internal angle between two selected lines. | Snell's law | Constrains two lines to obey a refraction law to simulate the light going through an interface |
Internal alignment | Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) | Map sketch | Maps a sketch to the previously selected face of a solid |
Merge | Merge two or more sketches | Mirror | Mirrors selected elements of a sketch |