Translations:Macro Mouse Cross/7/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "==Omezení== Kurzor může měnit vzhled v závislosti na používané pracovní ploše, musí opakovat funkci.<br /> The cursor can be subtitued to the other sliders (ex: ex...")
 
No edit summary
Line 1: Line 1:
==Omezení==
==Omezení==
Kurzor může měnit vzhled v závislosti na používané pracovní ploše, musí opakovat funkci.<br />
Kurzor může měnit vzhled v závislosti na používané pracovní ploše, musí opakovat funkci.<br />
Kurzor může být nahrazen jiným posuvníkem 'např. rozšíření okna, rohu, ...).<br />

Mřížka je permanentní.<br />
The cursor can be subtitued to the other sliders (ex: expansion of a window, corner...).<br />
Zbytek rezidentního makra.
The rest resident macro.

Revision as of 13:13, 18 May 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Macro Mouse Cross)
* The cursor can change appearance depending on the used Workbench, in which case the macro must be run again.
* The cursor can be substituted (for example when expanding of a window).
* The grid is permanent.

Omezení

Kurzor může měnit vzhled v závislosti na používané pracovní ploše, musí opakovat funkci.
Kurzor může být nahrazen jiným posuvníkem 'např. rozšíření okna, rohu, ...).
Mřížka je permanentní.
Zbytek rezidentního makra.