Translations:FEM Workbench/20/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 7: Line 7:
*** Добавить Материал в расчетную модель
*** Добавить Материал в расчетную модель
* Решение уравнений
* Решение уравнений
** Решение системы уровнеий из FreeCAD GUI.
** Решение системы уравнений из FreeCAD GUI.
* Постпроцессор
* Постпроцессор
** Посмотреть Результаты в FreeCAD GUI.
** Посмотреть Результаты в FreeCAD GUI.

Revision as of 03:32, 27 December 2015

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM Workbench)
The steps to carry out a finite element analysis are:
# Preprocessing: setting up the analysis problem.
## Modeling the geometry: creating the geometry with FreeCAD, or importing it from a different application.
## Creating an analysis.
### Adding simulation constraints such as loads and fixed supports to the geometric model.
### Adding materials to the parts of the geometric model.
### Creating a finite element mesh for the geometrical model, or importing it from a different application.
# Solving: running an external solver from within FreeCAD.
# Postprocessing: visualizing the analysis results from within FreeCAD, or exporting the results so they can be postprocessed with another application.

Шаги которые необходимо сделать чтобы произвести расчет МКЭ в FreeCAD FEM Workbench GUI:

  • Препроцессор
    • Моделирование геометрии, здесь FreeCAD уже является вполне развитым приложением.
    • Создать Расчет:
      • Создать FEM Сетку из геометрической модели.
      • Добавить Условия, такие как нагрузки и фиксаторы к расчетной модели.
      • Добавить Материал в расчетную модель
  • Решение уравнений
    • Решение системы уравнений из FreeCAD GUI.
  • Постпроцессор
    • Посмотреть Результаты в FreeCAD GUI.