Translations:Arch Roof/18/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
(One intermediate revision by the same user not shown)
Line 1: Line 1:
# Creare un contorno seguendo il senso antiorario e selezionarlo.
# Creare un contorno seguendo il senso antiorario e selezionarlo.
#*[[Image:CounterclockwiseWire.png|600px]]
#*[[Image:CounterclockwiseWire.png|600px]]
# Premere il pulsante {{KEY|[[Image:Arch Roof.png|16px]] [[Arch Roof/it|Tetto]]}}, o premere i tasti {{KEY|R}} e poi {{KEY|F}}
# Premere il pulsante {{Button|[[Image:Arch Roof.svg|16px]] [[Arch Roof/it|Tetto]]}}, o premere i tasti {{KEY|R}} e poi {{KEY|F}}
# Se l'oggetto tetto predefinito ha una forma strana è perché lo strumento non possiede tutte le informazioni necessarie.
# Se l'oggetto tetto predefinito ha una forma strana è perché lo strumento non possiede tutte le informazioni necessarie.
# Dopo aver creato il tetto predefinito, fare doppio clic sull'oggetto nella vista ad albero per accedere alla modifica di tutte le sue proprietà. Angolo deve essere compreso tra 0 e 90.
# Dopo aver creato il tetto predefinito, fare doppio clic sull'oggetto nella vista ad albero per accedere alla modifica di tutte le sue proprietà. Angolo deve essere compreso tra 0 e 90.
Line 13: Line 13:
# Alla fine, impostare un angolo di 90° per creare un frontone, una parete di tamponamento.
# Alla fine, impostare un angolo di 90° per creare un frontone, una parete di tamponamento.
#*[[Image:RoofProfil.png|600px]]
#*[[Image:RoofProfil.png|600px]]
# '''Inoltre è possibile guardare questo video''' : https://www.youtube.com/watch?v=4Urwru71dVk

Revision as of 18:10, 8 April 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Arch Roof)
# Create a closed wire with following the counter-clockwise direction and select it.
#:[[Image:CounterclockwiseWire.png|600px]]
# Press the {{Button|[[Image:Arch Roof.svg|16px]] [[Arch Roof|Arch Roof]]}} button, or press {{KEY|R}} then {{KEY|F}} keys
# The default roof object could have a strange shape, it's because the tool is missing some necessary information.
# After creating the default roof, double click on the object in the [[Tree_view|tree view]] to access and edit all the properties. Angle must be between 0 and 90.
#:[[File:RoofTable.png]]
# Each line corresponds to a roof pane. So you can set the properties you want for each roof pane.
# To help you, you can set {{incode|Angle}} or {{incode|Run}} to {{incode|0}} and define a {{incode|Relative Id}}, this makes an automatic calculation to find the data relative to the {{incode|Relative Id}}.
# It works like this:
## If {{incode|Angle = 0}} and {{incode|Run = 0}} then profile is identical to the relative profile.
## If {{incode|Angle = 0}} then {{incode|Angle}} is calculated so that the height is the same one as the relative profile.
## If {{incode|Run = 0}} then {{incode|Run}} is calculated so that the height is the same one as the relative profile.
# Finally, set an Angle to 90° to make a gable.
#:[[Image:RoofProfil.png|600px]]
# {{Emphasis|Note}}: for better comprehension, please see this [https://www.youtube.com/watch?v=4Urwru71dVk youtube clip].
  1. Creare un contorno seguendo il senso antiorario e selezionarlo.
  2. Premere il pulsante Tetto, o premere i tasti R e poi F
  3. Se l'oggetto tetto predefinito ha una forma strana è perché lo strumento non possiede tutte le informazioni necessarie.
  4. Dopo aver creato il tetto predefinito, fare doppio clic sull'oggetto nella vista ad albero per accedere alla modifica di tutte le sue proprietà. Angolo deve essere compreso tra 0 e 90.
  5. Ogni riga corrisponde ad una falda del tetto. Quindi è possibile impostare le proprietà desiderate per ogni falda del tetto.
  6. Per aiutarvi, è possibile impostare Angolo oppure Run a 0 e definire un ID relativo, questo rende automatici i calcoli per trovare i dati relativi a IdRelativo.
  7. Funziona in questo modo:
    1. Se Angolo = 0 e Run = 0 allora il profilo è identico al profilo relativo.
    2. Se Angolo = 0 allora l'angolo viene calcolato in modo che l'altezza sia la stessa del profilo relativo.
    3. Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profilo relativo.
  8. Alla fine, impostare un angolo di 90° per creare un frontone, una parete di tamponamento.
  9. Inoltre è possibile guardare questo video : https://www.youtube.com/watch?v=4Urwru71dVk