Translations:A2plus Workbench/75/zh-hans: Difference between revisions

From FreeCAD Documentation
(Created page with "*''''在更新之前重新计算导入的零件''<br/>将在FreeCAD中打开装配的所有零件,包括子装配,以便使用电子表格中的值进行重建。<br/>此...")
 
No edit summary
 
Line 1: Line 1:
*''''在更新之前重新计算导入的零件''<br/>将在FreeCAD中打开装配的所有零件,包括子装配,以便使用电子表格中的值进行重建。<br/>此功能旨在完全参数化构造。 '''注意:'''此功能是非常试验性的,不建议用于重要项目。<br/>已知问题:
*'''在更新之前重新计算导入的零件'''<br/>将在FreeCAD中打开装配的所有零件,包括子bujian ,以便使用电子表格中的值进行重建。<br/>此功能旨在完全参数化构造。 '''注意:'''此功能是非常试验性的,不建议用于重要项目。<br/>已知问题:
**由于错误引用零件中的拓扑名称,可能会破坏装配体
**由于错误引用零件中的拓扑名称,可能会破坏装配体
**如果在已关闭参考零件文件的情况下进行编辑,则主电子表格可能会损坏。 这会使FreeCAD崩溃。
**如果在已关闭参考零件文件的情况下进行编辑,则主电子表格可能会损坏。 这会使FreeCAD崩溃。

Latest revision as of 13:28, 2 January 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (A2plus Workbench)
; Recalculate imported parts before updating them : All parts of the assembly, including subassemblies, will be opened in FreeCAD to be reconstructed using values from spreadsheets.<br/> This feature is designed to construct fully parametrically. '''Note:''' This feature is very experimental and not recommended for important projects.<br/>Known problems:
* The assembly can be destroyed because of wrong references to topological names in parts
* Master spreadsheets can get broken when they are edited while a referenced part file is already closed. This can crash FreeCAD.
  • 在更新之前重新计算导入的零件
    将在FreeCAD中打开装配的所有零件,包括子bujian ,以便使用电子表格中的值进行重建。
    此功能旨在完全参数化构造。 注意:此功能是非常试验性的,不建议用于重要项目。
    已知问题:
    • 由于错误引用零件中的拓扑名称,可能会破坏装配体
    • 如果在已关闭参考零件文件的情况下进行编辑,则主电子表格可能会损坏。 这会使FreeCAD崩溃。