Translations:A2plus Workbench/72/zh-hans: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
*'''使用局部系统求解''<br/>求解器以将属性{{PropertyData|fixed Position}}设置为“True”的零件以及受其约束的零件开始。 不计算所有其他部分。 如果可以找到解析方案,则将下一个约束部分添加到计算中,依此类推。
*'''使用局部系统求解'''<br/>求解器以将属性{{PropertyData|fixed Position}}设置为“True”的零件以及受其约束的零件开始。 不计算所有其他部分。 如果可以找到解析方案,则将下一个约束部分添加到计算中,依此类推。
*'''使用“磁性”求解器,一次求解所有零件'<br/>求解器尝试将所有零件一次定向移动到属性设置为{{PropertyData|fixed Position}}的零件上 ''True''。 请注意,在大多数情况下,这将需要更多时间来计算解决方案。
*'''使用“磁性”求解器,一次求解所有零件'''<br/>求解器尝试将所有零件一次定向移动到{{PropertyData|fixed Position}}属性设置为 ''True''的零件上。 请注意,在大多数情况下,这将需要更多时间来计算解决方案。
*'''强制固定位置'''<br/>它将装配中所有零件的属性{{PropertyData|fixed Position}}设置为“ true”。 由于所有零件将始终固定在其创建位置,因此实际上不执行任何计算。
*'''强制固定位置'''<br/>它将装配中所有零件的属性{{PropertyData|fixed Position}}设置为“ true”。 由于所有零件将始终固定在其创建位置,因此实际上不执行任何计算。

Latest revision as of 13:24, 2 January 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (A2plus Workbench)
; Use solving of partial systems : The solver begins with a part that has the property {{PropertyData|fixed Position}} set to ''true'' and a part constrained to it. All other parts are not calculated. If a solution could be found, the next constrained part is added to the calculation and so on.
; Use "magnetic" solver, solving all parts at once : The solver tries to move all parts at once in direction to a part that has the property {{PropertyData|fixed Position}} set to ''true''. Note that this will in most cases take more time for the calculation of a solution.
; Force fixed position : This sets the property {{PropertyData|fixed Position}} to ''true'' for all parts in the assembly. Then no calculation is actually performed since all parts will always be fixed to the positions where they were created.
  • 使用局部系统求解
    求解器以将属性Datafixed Position设置为“True”的零件以及受其约束的零件开始。 不计算所有其他部分。 如果可以找到解析方案,则将下一个约束部分添加到计算中,依此类推。
  • 使用“磁性”求解器,一次求解所有零件
    求解器尝试将所有零件一次定向移动到Datafixed Position属性设置为 True的零件上。 请注意,在大多数情况下,这将需要更多时间来计算解决方案。
  • 强制固定位置
    它将装配中所有零件的属性Datafixed Position设置为“ true”。 由于所有零件将始终固定在其创建位置,因此实际上不执行任何计算。