Translations:A2plus Workbench/47/zh-hans: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
通过启用相应的按钮,可以选用的约束会高亮显示在工具栏和“约束工具”对话框中。 通过点击工具栏按钮[[Image:A2p DefineConstraints.svg|24px]]打开“约束工具”对话框。 它旨在保持打开状态,以便能够快速向部件添加多个约束。
通过启用相应的按钮,可以选用的约束会高亮显示在工具栏和“约束工具”对话框中。 通过点击工具栏按钮 [[Image:A2p DefineConstraints.svg|24px]]打开“约束工具”对话框。 它旨在保持打开状态,以便能够快速向部件添加多个约束。

Latest revision as of 13:08, 2 January 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (A2plus Workbench)
Possible constraints for a selection are displayed in the toolbar and the ''Constraint Tools'' dialog by enabling the corresponding buttons. The ''Constraint Tools'' dialog is opened via the toolbar button [[Image:A2p DefineConstraints.svg|24px]]. It is intended to stay open to be able to add quickly several constraints to the assembly.

通过启用相应的按钮,可以选用的约束会高亮显示在工具栏和“约束工具”对话框中。 通过点击工具栏按钮 打开“约束工具”对话框。 它旨在保持打开状态,以便能够快速向部件添加多个约束。