Translations:A2plus Workbench/41/zh-hans: Difference between revisions

From FreeCAD Documentation
(Created page with "在两个零件上选择一个平面。 点击工具栏按钮24px添加{{Variable|angledPlanes}}约束。 约束对话框允许您指定平...")
 
No edit summary
Line 1: Line 1:
在两个零件上选择一个平面。 点击工具栏按钮[[Image:A2p AngleConstraint.svg|24px]]添加{{Variable|angledPlanes}}约束。 约束对话框允许您指定平面之间的角度。 约束将使平面首先平行,并设置指定的角度。
在两个零件上选择一个平面。 点击工具栏按钮[[Image:A2p AngleConstraint.svg|24px]]添加{{Variable|斜面}}约束。 约束对话框允许您指定平面之间的角度。 约束将使平面首先平行,并设置指定的角度。

Revision as of 14:14, 30 December 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (A2plus Workbench)
Select a plane on both parts. The toolbar button [[Image:A2p AngleConstraint.svg|24px]] adds the constraint {{Variable|angledPlanes}}. The constraint dialog allows you to specify an angle between the planes. The constraint will make the planes at first parallel and the set the specified angle.

在两个零件上选择一个平面。 点击工具栏按钮添加斜面约束。 约束对话框允许您指定平面之间的角度。 约束将使平面首先平行,并设置指定的角度。