Translations:A2plus Workbench/37/zh-hans: Difference between revisions

Latest revision as of 14:08, 30 December 2019

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (A2plus Workbench)

Select a plane on both parts. The toolbar button [[Image:A2p PlanesParallelConstraint.svg|24px]] adds the constraint {{Variable|planesParallel}}. The constraint dialog allows you to specify the constraint direction. The constraint will make the planes parallel.

在两个零件上选择一个平面。按下工具栏按钮添加面与面相互平行约束。约束对话框允许您指定约束方向。约束将使平面平行。

Revision as of 06:14, 29 December 2019 (view source) Renoxray (talk \| contribs) (Created page with "在两个零件上选择一个平面。按下工具栏按钮24px添加{{Variable\|planesParallel}}约束。约束对话框允许您...")		Latest revision as of 14:08, 30 December 2019 (view source) Renoxray (talk \| contribs) No edit summary
Line 1:		Line 1:
	在两个零件上选择一个平面。按下工具栏按钮[[Image:A2p PlanesParallelConstraint.svg\|24px]]添加{{Variable\|~~planesParallel~~}}约束。约束对话框允许您指定约束方向。约束将使平面平行。		在两个零件上选择一个平面。按下工具栏按钮[[Image:A2p PlanesParallelConstraint.svg\|24px]]添加{{Variable\|面与面相互平行}}约束。约束对话框允许您指定约束方向。约束将使平面平行。