Translations:A2plus Workbench/25/zh-hans

From FreeCAD Documentation
Revision as of 05:19, 29 December 2019 by Renoxray (talk | contribs) (Created page with "选择一个零件上的顶点(点)或圆形(将选择其中心点),或一个球面(也将选择其...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

选择一个零件上的顶点(点)或圆形(将选择其中心点),或一个球面(也将选择其中心点)和另一个零件上的平面。点击工具栏按钮24px添加约束点对面。“约束”对话框允许您指定点和平面之间的偏移。此偏移也可以在平面的两侧之间翻转。如果偏移为零,则约束将顶点放置在平面上。