Система отслеживания Багов

From FreeCAD Documentation
Revision as of 08:36, 5 June 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Licence
Bug Triage
link=https://freecadweb.org/tracker/MantisBT is the bugtracker framework FreeCAD uses
link=https://freecadweb.org/tracker/MantisBT is the bugtracker framework FreeCAD uses

Tracker (сообщение об ошибке) - это место, где можно сообщать об ошибках, отправлять запросы функций, исправления или запросы на объединение вашей ветки, если вы разработали что-то с помощью Git. Трекер разделен на «Рабочие места», поэтому, пожалуйста, будьте конкретны и отправьте запрос в соответствующий подраздел. В случае сомнений оставьте это в разделе «FreeCAD».


Рекомендуемый рабочий процесс

Как показано на приведенной выше блок-схеме, перед созданием заявок всегда сначала ищите на форумах и в багтрекере, чтобы выяснить, является ли ваша проблема известной. Это экономит много времени / работы для разработчиков и волонтеров, которые могут потратить указанное время, делая FreeCAD еще более потрясающим.

Сообщение об ошибках

Если вы считаете, что, возможно, нашли ошибку, вы можете сообщить о ней, если вы следовали нашим пошаговым инструкциямː

  • Убедитесь что ваша ошибка, это действительно ошибка, то есть тоt, то что должно работать и что не работает. Если вы не уверены, не стесняйтесьсообщать о вашей проблеме на форуме и спросить что делать.
  • Перед сообщением чего либо, прочитайте Часто встречающиеся вопросы, поищите на форуме, убедитесь, что об ошибке не сообщалось ранее, сделайте поиск по bug tracker-у.
  • Опишите как можно более четко проблему, и как она может быть воспроизведена. Если мы не можем воспроизвести ошибку, мы не могли бы это исправить.
  • Опишите следующую информацию: Ваша операционная система, если она 32 или 64 битная, и версию FreeCAD с которой вы работаете.
  • Пожалуйста создавайте отдельный файл сообщения , для каждой ошибки.
  • Если вы находитесь в linux системе и ваша ошибка является причиной аварии FreeCAD, вы можете попытаться запустить отладку: Запустив в терминале gdb freecad (предполагается что gdb установлен), затем, в gdb, ввести run . FreeCAD запустится. После аварии, введите bt , для получения полной информации об ошибкеto. Включите это сообщение в ваше сообщение об ошибке.

Запрос о новой возможности

Если вы хотите что-то появилось в FreeCAD, что пока не реализовано, это не ошибка, а запрос новой функциональности(feature request). Вы также можете выложить его его на том же трекер (файл feature request как , а не ошибка), но имейте в виду, что нет никаких гарантий, что ваше желание будет выполнено.

  1. IMPORTANTː Before requesting a potential Feature Request please be certain that you are the first one doing so by searching the forums and the bugtracker. If you have concluded that there are no pre-existing tickets/discussions the next step is toː
  2. Start a forum thread to discuss your feature request with the community via the Open Discussion forum.
  3. Once the community agrees that this is a valid Feature, you then can open a ticket on the tracker (file it under feature request instead of bug).
  • NOTE #1 To keep things organized please remember to link the forum thread URL into the ticket and the ticket number (as a link) in to the forum thread.
  • NOTE #2 Keep in mind there are no guarantees that your wish will be fulfilled.
FreeCAD Bugtracker report page - use the dropdown to correctly designate what the ticket is

Предложение патчей

В случае если вы програмно исправили ошибку, расширение или что нибудь другое, что может быть общего использования в FreeCAD, создайте патч используя Subversion diff инструмент и сообщив, его нам на трэкер (файл как патч).

Addendumː FreeCAD development has switched to the GitHub development model so the workflow for submitting patches has been greatly enhanced/streamlined by submitting Pull Requests.

  • Open a forum thread in the Developer subforum to announce and discuss your patch.
  • Submit your PR to the FreeCAD GitHub repo. Be sure to link the forum thread in to the git commit summary.
  • Paste the PR link in to the forum thread for the devs/testers to test.
  • Be present for the discussion so that your code can potentially be merged more effectively.

NOTEː the FreeCAD community recommends to first discuss any large revision to the source code in advance to save everyone time.

Requesting merge

(Same guidelines as Submiting patches)

If you have created a git branch containing changes that you would like to see merged into the FreeCAD code, you can ask there to have your branch reviewed and merged if the FreeCAD developers are OK with it. You must first publish your branch to a public git repository (github, gitlab, bitbucket, sourceforge etc...) and then give the URL of your branch in your merge request.

MantisBT Tips and Tricks

MantisBT Markup

MantisBT (Mantis Bug Tracker) has it's own unique markup.

  • @mention - works just like on GitHub where if you prepend '@' to someone's username they will receive an email that they have been 'mentioned' in a ticket thread
  • #1234 - By adding a hash tag in front of a number a shortcut to link to another ticket within MantisBT will present.
    Note: if you hover over a ticket it will show you the summary + if the ticket is closed, it will be struck-through like #1234.
  • ~5678 - a shortcut that links to a bug note within a ticket. This can be used to reference someone's response within the thread. Each person that posts will show a unique ~#### number next to their username. If you look at the image in the example, you see that the shortcut is referencing the ticket number:comment number of said ticket
  • <del></del> - Using these tags will strikeout text.
  • <code></code> - To present a line or block of code, use this tag and it will colorize and differentiate it elegantly.

MantisBT BBCode

In addition to the above Tracker/MantisBT ̠Markup one also has the possibility to use BBCode format. For a comprehensive list see the BBCode plus plugin page. Here is a list of supported BBCode tagsː
[img][/img] - Images
[url][/url] - Links
[email][/email] - Email addresses
[color=red][/color] - Colored text
[highlight=yellow][/highlight] - Highlighted text
[size][/size] - Font size
[list][/list] - Lists
[list=1][/list] - Numbered lists (number is starting number)
[*] - List items
[b][/b] - Bold
[u][/u] - underline
[i][/i] - Italic
[s][/s] - Strikethrough
[left][/left] - Left align
[center][/center] - Center
[right][/right] - Right align
[justify][/justify] - Justify
[hr] - Horizontal rule
[sub][/sub] - Subscript
[sup][/sup] - Superscript
[table][/table] - Table
[table=1][/table] - Table with border of specified width
[tr][/tr] - Table row
[td][/td] - Table column
[code][/code] - Code block
[code=sql][/code] - Code block with language definition
[code start=3][/code] - Code block with line numbers starting at number
[quote][/quote] - Quote by *someone* (no name)
[quote=name][/quote] - Quote by *name*

MantisBT <=> GitHub Markup

Below are special MantisBT Source-Integration plugin keywords which will link to the FreeCAD GitHub repo. See Tracker#GitHub_and_MantisBT.

  • c:FreeCAD:git commit hash: - c stands for 'commit'. FreeCAD stands for the FreeCAD GitHub repo. 'git commit hash' is the specific git commit hash to reference. Note: the trailing colon is necessary. Exampleː cːFreeCADː709d2f325db0490016807b8fa6f49d1c867b6bd8ː
  • d:FreeCAD:git commit hash: - similar to the above, d stands for 'diff' which will provide a Diff view of the commit. Exampleː dːFreeCADː709d2f325db0490016807b8fa6f49d1c867b6bd8ː
  • p:FreeCAD:pullrequest: - similar to the above, p stands for Pull Request. Exampleː pːFreeCADː498ː

GitHub and MantisBT

The FreeCAD bugtracker has a plug-in called Source Integration which essentially ties both the FreeCAD GitHub repo to our MantisBT tracker. It makes it easier to track and associate git commits with their respective MantisBT tickets. The Source Integration plugin scans the git commit messages for specific keywords in order to execute the following actions:

Note The below keywords need to be added in the git commit message and not the PR subject

Remotely referencing a ticket

Using this pattern will automagically associate a git commit to a ticket (Note: this will not close the ticket.) The format MantisBT will recognize:

  • bug #1234
  • bugs #1234, #5678
  • issue #1234
  • issues #1234, #5678
  • report #1234
  • reports #1234, #5678

For the inquisitive here is the regex MantisBT uses for this operation:
/(?:bugs?|issues?|reports?)+\s*:?\s+(?:#(?:\d+)[,\.\s]*)+/i

Remotely resolving a ticket

The format MantisBT will recognize:

  • fix #1234
  • fixed #1234
  • fixes #1234
  • fixed #1234, #5678
  • fixes #1234, #5678
  • resolve #1234
  • resolved #1234
  • resolves #1234
  • resolved #1234, #5678
  • resolves #1234, #5678

For the inquisitive here is the regex MantisBT uses for this operation:
/(?:fixe?d?s?|resolved?s?)+\s*:?\s+(?:#(?:\d+)[,\.\s]*)+/i

Related

Licence/ru
CompileOnWindows/ru