TechDraw LineGroup: Difference between revisions

From FreeCAD Documentation
m ((Vertical Docnav))
(update)
Line 3: Line 3:
<!--T:24-->
<!--T:24-->
{{Docnav
{{Docnav
|[[TechDraw_WeldSymbol|Add Welding Information to Leader]]
|[[TechDraw WeldingSymbol|WeldingSymbol]]
|[[TechDraw_Templates|Templates]]
|[[TechDraw_Templates|Templates]]
|[[TechDraw_Module|TechDraw]]
|[[TechDraw_Module|TechDraw]]
|IconL=techdraw-weldsymbol.svg
|IconL=TechDraw_WeldSymbol.svg
|IconC=Workbench_TechDraw.svg
|IconC=Workbench_TechDraw.svg
|IconR=
|IconR=
Line 75: Line 75:
<!--T:25-->
<!--T:25-->
{{Docnav
{{Docnav
|[[TechDraw_WeldSymbol|Add Welding Information to Leader]]
|[[TechDraw WeldingSymbol|WeldingSymbol]]
|[[TechDraw_Templates|Templates]]
|[[TechDraw_Templates|Templates]]
|[[TechDraw_Module|TechDraw]]
|[[TechDraw_Module|TechDraw]]
|IconL=techdraw-weldsymbol.svg
|IconL=TechDraw_WeldSymbol.svg
|IconC=Workbench_TechDraw.svg
|IconC=Workbench_TechDraw.svg
|IconR=
|IconR=

Revision as of 22:15, 2 February 2020

Overview

LineGroups are used to control the appearance of various types of lines.

If you have write permission you can edit LineGroup.csv to add your own LineGroups.

This file is usually in

$INSTALL_DIR/Mod/TechDraw/LineGroup/LineGroup.csv

Where $INSTALL_DIR is the directory where FreeCAD was installed, for example

/usr/share/freecad/Mod/TechDraw/LineGroup/LineGroup.csv

You can specify your favourite defaults in the TechDraw Preferences.

LineGroup File Path

  • Windows: C:\Program Files\FreeCAD\data\Mod\TechDraw\LineGroup\
  • Mac: /Applications/FreeCAD.app/Contents/Mod/TechDraw/LineGroup/
  • Linux: /usr/share/freecad/Mod/TechDraw/LineGroup/
    • freecad-daily PPA: /usr/share/freecad-daily/Mod/TechDraw/LineGroup/

Note: A new preference has been added to allow you to use your own personal LineGroup file.

;FreeCAD LineGroup Definitions
;Format: *GroupName,thin,graphic,thick,extra
;thin: hidden lines
;graphic: dimensions, centerlines
;thick: visible lines
;extra: not implemented
*FC 0.25mm,0.13,0.18,0.25,0.50
*FC 0.35mm,0.18,0.25,0.35,0.70
*FC 0.50mm,0.25,0.35,0.50,1.0
*FC 0.70mm,0.35,0.50,0.70,1.4
*FC 1.00mm,0.50,0.70,1.00,2.00

Notes

  • The LineGroup name (ex FC 0.25mm) must be entered exactly as specified in the CSV file.
  • Line width in TechDraw is always specified in mm, even when using other unit systems.