Cotă Verticală TechDraw

From FreeCAD Documentation
Revision as of 17:31, 22 September 2018 by Luc (talk | contribs) (Created page with "==Descriere== Instrumentul pentru cote verticale adaugă o cotă verticală unei imagini. Cota poate fi între două vârfuri, lungimea unei muchii sau distanța verticală di...")

TechDraw Dimension Vertical

Menu location
TechDraw → Dimension Vertical
Workbenches
TechDraw
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Instrumentul pentru cote verticale adaugă o cotă verticală unei imagini. Cota poate fi între două vârfuri, lungimea unei muchii sau distanța verticală dintre două margini. Distanța va fi inițial distanța proiectată, dar această distanță poate fi modificată în funcție de distanța 3D reală utilizând instrumentul Link Dimension .

How to use

  1. Select the points or edge which define your measurement.
  2. Press the File:Dimension Vertical.png Dimension Vertical button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.

Options

None.

Properties

Template:TechDraw DimProps

Scripting

Vertical dimensions can be added to Pages using Python.

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "DistanceX"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)

Notes

  • All Dimensions are extremely vulnerable to the infamous "topological naming" issue. It is not possible at this time to keep references to 2D (projected) or 3D (actual) geometrical objects in sync with changes in the model. It is recommended that Dimensions be added towards the end of the drawing creation process.