Azioni di Posizionamento

From FreeCAD Documentation
Revision as of 20:54, 8 October 2014 by Renatorivo (talk | contribs)

Descrizione

Opzioni della scheda Posizionamento. Queste opzioni riguardano soltanto la posizione dell'oggetto nello spazio, non riguardano altri attributi della forma.

Utilizzo

La funzione Posizionamento può essere attivata in diversi modi:

Scripting Placement as y/p/r and Matrix

  • oppure, dalla finestra Vista combinata → Proprietà → Dati → PPosizionamento → ...,

Task_Placement

  • oppure dal menu Modifica → Posizionamento....


Nella Vista combinata → Dati

  • Click a shape to select it.
  • Click Placement (the title, not the little arrow), and a button with three dots appears: Tache_Placement
  • click on this button, and the Placement Dialog is displayed:


File:Tache Placement it 02.png

Options

Template:TitreProprietes

  • TASKS X Translation in X direction (Click to enlarge) Moves the coordinate system of the object in the X direction in relation to the axis coordinates of origin 0, 0, 0.
  • TASKS Y Translation in the Y direction (Click to enlarge) Moves the coordinate system of the object in the Y direction in relation to the axis coordinates of origin 0, 0, 0.
  • TASKS Z Translation in the Z direction (Click to enlarge) Moves the coordinate system of the object in the Z direction in relation to the axis coordinates of origin 0, 0, 0.

Template:TitreProprietes

  • TASKS X: Move the center of rotation in the direction X, from the coordinates of the selected object. (default: 0,0,0).
  • TASKS Y: Move the center of rotation in the direction Y from the coordinates of the selected object. (default: 0,0,0).
  • TASKS Z: Move the center of rotation in the direction Z, from the coordinates of the selected object. (default: 0,0,0).
  • TASKS User Defined ... : Allows you to change the three axes ( X, Y, Z) in a single operation User Defined.

Template:TitreProprietes To adjust our rotation parameters we have two methods available.

  • First option. Select Rotation axis with angle Tache_Placement Option rotation axis and angle (Default).
    • TASKS Axis: X: The rotation will be on the X axis.
    • TASKS Axis: Y: The rotation will be on the Y axis.
    • TASKS Axis: Z: The rotation will be on the Z axis. (Default axis).
    • TASKS Angle: Angle of rotation in degrees from -360.00 ° to 360.00 °. (Default: 0.00°).
  • Second option. Select Euler Angles Tache_Placement Option Euler angles.

This option may be easier to work with, however, even in this mode, there are important things to remember: Positive rotations are in the clockwise direction, looking out from the origin along a positive axis. Or to put it differently, the rotations are positive in the counterclockwise direction, looking in to the origin along a positive axis.

  • Imbardata : Il movimento di imbardata è la rotazione orizzontale di un veicolo attorno ad un asse verticale. Convenzionalmente l'asse di imbardata è l'asse Z e l'angolo di imbardata è indicato dall'angolo ψ.
  • Beccheggio : Il beccheggio è il movimento di oscillazione muso-coda o prua-poppa attorno ad un asse orizzontale. Convenzionalmente l'asse di beccheggio è l'asse Y ed è indicato dall'angolo θ.
  • Rollio : Il rollio è il movimento oscillatorio di un veicolo attorno al proprio asse longitudinale. Convenzionalmente l'asse di rollio corrisponde all'asse X ed è indicato dall'angolo φ.

Yaw, pitch and roll refer to the attitude of an object in 3D space. These terms are commonly used in aviation. The angles are the Tait-Bryan angles. If you want more information, try Euler angles.

Option Euler angles
Option Euler angles


Imbardata

  • Template:SchedaAzioni : Imbardata è la rotazione intorno all'asse Z, da destra a sinistra e viceversa. (L'imbardata è l'angolo Psi ψ). Valore da -360,00° a 360,00° (Di default: 0,00°).




Beccheggio

  • Template:SchedaAzioni : Beccheggio è la rotazione intorno all'asse Y, alzare o abbassare il naso. Valore da -360,00° a 360,00° (Di default: 0,00°).


Rollio

  • Template:SchedaAzioni : Rollio è la rotazione intorno all'asse X, dondolare le ali. Valore da -360,00° a 360,00° (Di default: 0,00°).


  • Template:SchedaAzioni : Quando viene selezionata, questa opzione azzera virtualmente i parametri, per consentire di inserire i valori senza dover fare dei calcoli con i parametri originali della forma.
    Dopo aver confermato con OK , i valori inseriti si sommano ai valori della forma.
  • The Reset returns all values ​​to 0,0,0.

Links and Example

A practical example of using this command is in the tutorial Aeroplane.

Other explanation on Placement