Crea link

From FreeCAD Documentation
Revision as of 21:28, 15 September 2019 by Renatorivo (talk | contribs) (Created page with "== Utilizzo ==")

Std LinkMake

Posizione nel menu
None
Ambiente
Tutti
Avvio veloce
Nessuno
Introdotto nella versione
0.19
Vedere anche
Std Part, Std Group, PartDesign Body

Descrizione

Un App::Link o solo Link è un tipo di oggetto che fa riferimento a un altro oggetto, nello stesso documento o in un altro documento. È pensato per l'uso in assiemi meccanici in cui un oggetto può apparire più volte, ad esempio viti e bulloni, ma anche altri complessi sottoassiemi.

Per una semplice duplicazione di oggetti, vedere Draft Clone, Draft Schiera, e Draft Copie su tracciato. Gli strumenti Draft LinkArray e Draft PathLinkArray creano dei collegamenti, Link, anziché semplici copie.

I collegamenti si riferiscono al corpo completo. Per creare schiere di funzioni all'interno dello stesso Corpo di PartDesign, usare Serie rettangolare, Serie polare, e Multi trasformazione.

Utilizzo

  1. Select an object for which you wish to make a Link.
  2. Press the Std LinkMake button. If no object is selected, an empty Link will be created.

Properties

Data

  • DatiLinked Object:
  • DatiLink Transform:
  • DatiPlacement:
  • DatiSub Elements:
  • DatiShow Elements:
  • DatiElement Count:
  • DatiScale:

It will additionally show the properties of the original DatiLinked Object.

View

  • VistaDraw Style:
  • VistaLine Width:
  • VistaOverride Material:
  • VistaPoint Size:
  • VistaSelectable:
  • VistaShape Material:

It will additionally show the view properties of the original DatiLinked Object.