Std Base: Difference between revisions

From FreeCAD Documentation
m (space)
(The base commands and functions normally start with the prefix Std_, indicating that they are "standard".)
Line 13: Line 13:
<!--T:3-->
<!--T:3-->
The [[Std_Base|Std Base]] is not a real workbench. This page just collects all commands from the base system which do not belong to a specific workbench, but which may be used in all of them.
The [[Std_Base|Std Base]] is not a real workbench. This page just collects all commands from the base system which do not belong to a specific workbench, but which may be used in all of them.

The base commands and functions normally start with the prefix {{incode|Std}}, indicating that they are "standard".


== Tools == <!--T:4-->
== Tools == <!--T:4-->

Revision as of 05:16, 28 October 2019

Introduction

The Std Base is not a real workbench. This page just collects all commands from the base system which do not belong to a specific workbench, but which may be used in all of them.

The base commands and functions normally start with the prefix Std, indicating that they are "standard".

Tools

Most of the commands in this page can be accessed from menus, toolbars, and context menus.

Standard menu

The Standard Menu is composed of seven sub-menus.

Structure toolbar

These commands allow structuring the model tree to have better organization of the existing shapes, and to create "Links" which are useful to create assemblies.