Std Base: Difference between revisions

From FreeCAD Documentation
(Commands from the structure toolbar)
(→‎Structure toolbar: Indicating the version 0.17 and 0.19 when these objects appeared.)
Line 29: Line 29:
=== Structure toolbar ===
=== Structure toolbar ===


These commands allow structuring the model tree to have better organization of the existing shapes, and to create "Links" which are useful to create assemblies.
* [[File:Std_Part.svg|32px]] [[Std_Part|Std Part]]
* [[File:Std_Group.svg|32px]] [[Std_Group|Std Group]]
* [[File:Std_Part.svg|32px]] [[Std_Part|Std Part]] {{Version|0.17}}
* [[File:Std_LinkMake.svg|32px]] [[Std_LinkMake|Std LinkMake]]
* [[File:Std_Group.svg|32px]] [[Std_Group|Std Group]] {{Version|0.17}}
* [[File:Std_LinkActions.svg|32px]] [[Std_LinkActions|Std LinkActions]]
* [[File:Std_LinkMake.svg|32px]] [[Std_LinkMake|Std LinkMake]] {{Version|0.19}}
* [[File:Std_LinkActions.svg|32px]] [[Std_LinkActions|Std LinkActions]] {{Version|0.19}}


{{Userdocnavi}}
{{Userdocnavi}}

Revision as of 19:27, 20 October 2019

Introduction

The Std Base is not a real workbench. This page just collects all commands from the base system which do not belong to a specific workbench, but which may be used in all of them.

Tools

Most of the commands in this page can be accessed from menus, toolbars, and context menus.

Standard menu

The Standard Menu is composed of seven sub-menus.

Structure toolbar

These commands allow structuring the model tree to have better organization of the existing shapes, and to create "Links" which are useful to create assemblies.