All public logs
Combined display of all available logs of FreeCAD Documentation. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 09:29, 19 April 2024 Roy 043 talk contribs marked WikiRobots for translation
- 09:29, 19 April 2024 Roy 043 talk contribs marked WikiPages for translation
- 09:12, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateEllipseBy3Points/19/pl (Created page with "Zapoznaj się z informacjami na stronie Sketcher CreateEllipseByCenter.")
- 08:58, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateCircle/12/pl (Created page with "Pos-OVP = Pozycyjne Parametry w widoku. {{Version/pl|0.22}}<br> Dim-OVP = Wymiarowe parametry w widoku. {{Version/pl|0.22}}")
- 08:58, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateCircle/11/pl (Created page with "Zapoznaj się również z informacjami na stronie Pomoce kreślarskie.")
- 08:47, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateEllipseBy3Points/18/pl (Created page with "==Uwagi==")
- 08:47, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateEllipseBy3Points/17/pl (Created page with "Zapoznaj się również z informacjami na stronie Pomoce kreślarskie.")
- 08:41, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateRegularPolygon/17/pl (Created page with "* Okrąg geometrii konstrukcji nie jest widoczny poza szkicem. Nie można go usunąć bez naruszenia geometrii wielokąta.")
- 08:41, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateRegularPolygon/16/pl (Created page with "==Uwagi==")
- 08:38, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectVerticalAxis for translation
- 08:37, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectHorizontalAxis for translation
- 08:37, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectOrigin for translation
- 08:36, 19 April 2024 Roy 043 talk contribs marked Sketcher RestoreInternalAlignmentGeometry for translation
- 08:34, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectConflictingConstraints/14/en (Importing a new version from external source)
- 08:34, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectConflictingConstraints/13/en (Importing a new version from external source)
- 08:34, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectConflictingConstraints/12/en (Importing a new version from external source)
- 08:34, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectConflictingConstraints for translation
- 08:33, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectRedundantConstraints/15/en (Importing a new version from external source)
- 08:33, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectRedundantConstraints/14/en (Importing a new version from external source)
- 08:33, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectRedundantConstraints/13/en (Importing a new version from external source)
- 08:33, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectRedundantConstraints/12/en (Importing a new version from external source)
- 08:33, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectRedundantConstraints for translation
- 08:32, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateRegularPolygon/15/pl (Created page with "Pos-OVP = Pozycyjne Parametry w widoku. {{Version/pl|0.22}}<br> Dim-OVP = Wymiarowe parametry w widoku. {{Version/pl|0.22}}")
- 08:32, 19 April 2024 Kaktus talk contribs created page Translations:Sketcher CreateRegularPolygon/14/pl (Created page with "Zapoznaj się również z informacjami na stronie Pomoce kreślarskie.")
- 08:29, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectElementsAssociatedWithConstraints for translation
- 08:28, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectConstraints for translation
- 08:27, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectElementsWithDoFs/17/en (Importing a new version from external source)
- 08:27, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectElementsWithDoFs/16/en (Importing a new version from external source)
- 08:27, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher SelectElementsWithDoFs/15/en (Importing a new version from external source)
- 08:27, 19 April 2024 Roy 043 talk contribs marked Sketcher SelectElementsWithDoFs for translation
- 08:21, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher ToggleActiveConstraint/18/en (Importing a new version from external source)
- 08:21, 19 April 2024 Roy 043 talk contribs marked Sketcher ToggleActiveConstraint for translation
- 08:19, 19 April 2024 Roy 043 talk contribs marked Sketcher ToggleDrivingConstraint for translation
- 08:16, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher ToggleDrivingConstraint/18/en (Importing a new version from external source)
- 08:16, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher ToggleDrivingConstraint/17/en (Importing a new version from external source)
- 08:16, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher ToggleDrivingConstraint/16/en (Importing a new version from external source)
- 08:16, 19 April 2024 FuzzyBot talk contribs created page Translations:Sketcher ToggleDrivingConstraint/15/en (Importing a new version from external source)
- 08:16, 19 April 2024 Roy 043 talk contribs marked Sketcher ToggleDrivingConstraint for translation
- 04:41, 19 April 2024 Kaktus talk contribs created page Translations:Fine-tuning/46/pl (Created page with "===24px|link=CAM_Workbench/pl środowisko pracyCAM===")
- 04:37, 19 April 2024 Kaktus talk contribs created page Translations:Third Party Libraries/121/pl (Created page with "==LibPack==")
- 04:36, 19 April 2024 Kaktus talk contribs created page Translations:Third Party Libraries/120/pl (Created page with "====Quarter====")
- 04:36, 19 April 2024 Kaktus talk contribs created page Translations:Third Party Libraries/119/pl (Created page with "====Shiboken2 i Pyside2====")
- 04:35, 19 April 2024 Kaktus talk contribs created page Translations:Third Party Libraries/118/pl (Created page with "===Python===")
- 04:35, 19 April 2024 Kaktus talk contribs created page Translations:Third Party Libraries/117/pl (Created page with "==Informacje ogólne==")
- 17:45, 18 April 2024 Roy 043 talk contribs deleted page Translations:Path Workbench/3/zh (content was: "!!FUZZY!!FreeCAD刀路工作台按如下工作流程创建这些机器指令: * 使用零件设计工作台,零件工作台 或草图工作台中的一个或多个创建作为基础对象的3D模型。 *在刀路工作台中创建刀路作业。 这包含用于生成在CNC铣床上处理作业的G-code所有必要的信息:有库存材料,工厂有一定的Path_...")
- 17:45, 18 April 2024 Roy 043 talk contribs deleted page Translations:Path Workbench/2/en (content was: "The 24px Path Workbench is used to produce machine instructions for [https://en.wikipedia.org/wiki/CNC_router CNC machines] from a FreeCAD 3D model. These produce real-world 3D objects on CNC machines such as mills, lathes, lasercutters, or similar. Typically, instructions are a [https://en.wikipedia.org/wiki/G-code G-code] di...", and the only contributor was "FuzzyBot" (talk))
- 17:44, 18 April 2024 Roy 043 talk contribs deleted page Translations:Path Development Roadmap/2/en (content was: "This page will discuss the strategic objectives for the Path Workbench. This shouldn't be a list of features to implement but broader objectives that will steer the overall direction of Path development.", and the only contributor was "FuzzyBot" (talk))
- 17:44, 18 April 2024 Roy 043 talk contribs deleted page Translations:Path Workbench/128/en (content was: "* [https://www.youtube.com/playlist?list=PLEuOia-QxyFKgzAeTyH62GKqWKVURiWJL FreeCAD Path: Custom paths with Python - Part 1 - 5]: a playlist with a series of 5 videos in English by sliptonic. This series shows how to work with the Path Workbench. * [https://www.youtube.com/playlist?list=PLUrr_kHPp4vhGdLlj6IemtF-OPUlRvSTC FreeCAD CAM Path Workbench]: a p...", and the only contributor was "FuzzyBot" (talk))
- 17:44, 18 April 2024 Roy 043 talk contribs deleted page Translations:Path Development Roadmap/45/en (content was: "{{Docnav |Fourth axis |Preferences |Path |IconL= |IconR= |IconC=Workbench_Path.svg }}", and the only contributor was "FuzzyBot" (talk))
- 17:43, 18 April 2024 Roy 043 talk contribs deleted page Translations:Path Development Roadmap/46/en (content was: "{{Docnav |Fourth axis |Preferences |Path |IconL= |IconR= |IconC=Workbench_Path.svg }}", and the only contributor was "FuzzyBot" (talk))