Language statistics
This page shows translation statistics for all message groups for a language.
Translation statistics for français (recent translations).
Message group | Messages | Untranslated | Completion | Reviewed | Outdated |
---|---|---|---|---|---|
About FreeCAD | 15 | 1 | 93% | 0% | 7% |
CAM Deburr | 25 | 2 | 92% | 0% | 4% |
CAM DressupDogbone | 12 | 2 | 83% | 0% | 17% |
CAM Drilling | 40 | 8 | 80% | 0% | 20% |
CAM Engrave | 25 | 5 | 80% | 0% | 20% |
CAM experimental | 8 | 5 | 37% | 0% | 63% |
CAM ExportTemplate | 18 | 7 | 61% | 0% | 39% |
CAM FAQ | 99 | 26 | 73% | 0% | 27% |
CAM Fixture | 15 | 6 | 60% | 0% | 40% |
CAM fourth axis | 22 | 6 | 72% | 0% | 28% |
CAM Helix | 21 | 6 | 71% | 0% | 29% |
CAM Inspect | 10 | 6 | 40% | 0% | 60% |
CAM Job | 22 | 8 | 63% | 0% | 37% |
CAM MillFace | 39 | 9 | 76% | 0% | 24% |
CAM OpActiveToggle | 16 | 6 | 62% | 0% | 38% |
CAM Pocket 3D | 39 | 8 | 79% | 0% | 21% |
CAM Pocket Shape | 44 | 8 | 81% | 0% | 19% |
CAM Post | 28 | 12 | 57% | 0% | 43% |
CAM Postprocessor Customization | 33 | 10 | 69% | 0% | 31% |
CAM Preferences | 15 | 4 | 73% | 0% | 27% |
CAM Probe | 9 | 4 | 55% | 0% | 45% |
CAM Profile | 50 | 10 | 80% | 0% | 20% |
CAM Sanity | 35 | 13 | 62% | 0% | 38% |
CAM scripting | 68 | 5 | 92% | 0% | 8% |
CAM SelectLoop | 10 | 6 | 40% | 0% | 60% |
CAM SetupSheet | 14 | 5 | 64% | 0% | 36% |
CAM Shape | 46 | 9 | 80% | 0% | 20% |
CAM SimpleCopy | 10 | 7 | 30% | 0% | 70% |
CAM Simulator | 10 | 6 | 40% | 0% | 60% |
CAM Slot | 44 | 10 | 77% | 0% | 23% |
CAM Stop | 11 | 6 | 45% | 0% | 55% |
CAM Surface | 71 | 16 | 77% | 0% | 23% |
CAM ThreadMilling | 9 | 4 | 55% | 0% | 45% |
CAM ToolBit | 15 | 7 | 53% | 0% | 47% |
CAM ToolBit Library | 14 | 4 | 71% | 0% | 29% |
CAM ToolBitDock | 15 | 7 | 53% | 0% | 47% |
CAM ToolBitLibraryOpen | 24 | 9 | 62% | 0% | 38% |
CAM ToolController | 11 | 3 | 72% | 0% | 28% |
CAM Tools | 43 | 22 | 48% | 0% | 52% |
CAM ToolShape | 15 | 7 | 53% | 0% | 47% |
CAM Vcarve | 32 | 7 | 78% | 0% | 22% |
CAM Walkthrough for the Impatient | 49 | 24 | 51% | 0% | 49% |
CAM Waterline | 47 | 12 | 74% | 0% | 26% |
CAM Workbench | 91 | 22 | 75% | 0% | 25% |
Draft Label | 43 | 1 | 97% | 0% | 3% |
Draft PointArray | 42 | 1 | 97% | 0% | 3% |
Draft SelectPlane | 28 | 1 | 96% | 0% | 4% |
Drawing Dimensioning Addon | 72 | 70 | 2% | 0% | 0% |
Licence | 32 | 10 | 68% | 0% | 19% |
Macro Half-Hull Model | 97 | 79 | 18% | 0% | 0% |
Release notes 0.22 | 105 | 6 | 94% | 0% | 4% |
Sketcher Dialog | 34 | 17 | 50% | 0% | 24% |
Sketcher EditSketch | 8 | 2 | 75% | 0% | 25% |
Sketcher Grid | 9 | 1 | 88% | 0% | 12% |
Sketcher LeaveSketch | 8 | 3 | 62% | 0% | 38% |
Sketcher MapSketch | 9 | 4 | 55% | 0% | 45% |
Sketcher MergeSketches | 8 | 3 | 62% | 0% | 38% |
Sketcher MirrorSketch | 8 | 3 | 62% | 0% | 38% |
Sketcher NewSketch | 11 | 6 | 45% | 0% | 28% |
Sketcher RenderingOrder | 9 | 1 | 88% | 0% | 12% |
Sketcher ReorientSketch | 8 | 5 | 37% | 0% | 63% |
Sketcher Snap | 9 | 2 | 77% | 0% | 23% |
Sketcher StopOperation | 9 | 3 | 66% | 0% | 23% |
Sketcher ValidateSketch | 32 | 3 | 90% | 0% | 10% |
Sketcher ViewSection | 10 | 4 | 60% | 0% | 30% |
Sketcher ViewSketch | 9 | 4 | 55% | 0% | 34% |
All message groups together | 1,889 | 599 | 68% | 0% | 23% |