User contributions for Wconly

28 July 2019

• 10:2010:20, 28 July 2019 diff hist −1‎ Draft Ellipse/zh-cn ‎ Created page with "==选项=="
• 10:2010:20, 28 July 2019 diff hist +10‎ N Translations:Draft Ellipse/6/zh-cn ‎ Created page with "==选项==" current
• 10:2010:20, 28 July 2019 diff hist +30‎ Draft Ellipse/zh-cn ‎ Created page with "创建椭圆之后，通过将其第一角度（first angle）与最后角度（last angle）两个属性设置为不同值，便可以将它转换为一条椭圆弧。"
• 10:2010:20, 28 July 2019 diff hist +168‎ N Translations:Draft Ellipse/15/zh-cn ‎ Created page with "创建椭圆之后，通过将其第一角度（first angle）与最后角度（last angle）两个属性设置为不同值，便可以将它转换为一条椭圆弧。" current
• 10:1910:19, 28 July 2019 diff hist −9‎ Draft Ellipse/zh-cn ‎ Created page with "==如何使用== # 按下{{Button|16px Draft Ellipse}}按钮，或先按{{KEY|E}}键再按{{KEY|L}}键。 # 在3D视图中点击第一个点，..."
• 10:1910:19, 28 July 2019 diff hist +482‎ N Translations:Draft Ellipse/5/zh-cn ‎ Created page with "==如何使用== # 按下{{Button|16px Draft Ellipse}}按钮，或先按{{KEY|E}}键再按{{KEY|L}}键。 # 在3D视图中点击第一个点，..."
• 10:1610:16, 28 July 2019 diff hist −4‎ Draft Ellipse/zh-cn ‎ Created page with "{{Caption|通过矩形角点所定义的椭圆}}"
• 10:1610:16, 28 July 2019 diff hist +48‎ N Translations:Draft Ellipse/4/zh-cn ‎ Created page with "{{Caption|通过矩形角点所定义的椭圆}}" current
• 10:1510:15, 28 July 2019 diff hist +9‎ Draft Ellipse/zh-cn ‎No edit summary
• 10:1510:15, 28 July 2019 diff hist +9‎ Translations:Draft Ellipse/3/zh-cn ‎No edit summary current
• 10:1410:14, 28 July 2019 diff hist +57‎ Draft Ellipse/zh-cn ‎ Created page with "此工具也可用于创建椭圆弧，此时还要指定弧的起始角度与结束角度。而要创建圆与圆弧则可采用底图圆形工具与Draft..."
• 10:1410:14, 28 July 2019 diff hist +348‎ N Translations:Draft Ellipse/14/zh-cn ‎ Created page with "此工具也可用于创建椭圆弧，此时还要指定弧的起始角度与结束角度。而要创建圆与圆弧则可采用底图圆形工具与Draft..." current
• 10:1010:10, 28 July 2019 diff hist +35‎ Draft Ellipse/zh-cn ‎ Created page with "椭圆工具会根据用户输入的两个点，在当前的工作平面内创建一个椭圆。该椭圆将恰好适配于这两个点所定义的矩形..."
• 10:1010:10, 28 July 2019 diff hist +274‎ N Translations:Draft Ellipse/3/zh-cn ‎ Created page with "椭圆工具会根据用户输入的两个点，在当前的工作平面内创建一个椭圆。该椭圆将恰好适配于这两个点所定义的矩形..."
• 03:2003:20, 28 July 2019 diff hist −5‎ Draft Ellipse/zh-cn ‎ Created page with "==描述=="
• 03:2003:20, 28 July 2019 diff hist +10‎ N Translations:Draft Ellipse/2/zh-cn ‎ Created page with "==描述==" current
• 03:2003:20, 28 July 2019 diff hist +5,596‎ N Draft Ellipse/zh-cn ‎ Created page with "底图椭圆"
• 03:2003:20, 28 July 2019 diff hist +12‎ N Translations:Draft Ellipse/Page display title/zh-cn ‎ Created page with "底图椭圆" current
• 03:1003:10, 28 July 2019 diff hist +2‎ Draft Arc 3Points/zh-cn ‎ Created page with "# 按下{{Button|16px Draft Arc 3Points}}按钮，或先按{{KEY|A}}键再按{{KEY|T}}键。 # 在3D视图中点击第一个点，或输入..."
• 03:1003:10, 28 July 2019 diff hist +434‎ N Translations:Draft Arc 3Points/7/zh-cn ‎ Created page with "# 按下{{Button|16px Draft Arc 3Points}}按钮，或先按{{KEY|A}}键再按{{KEY|T}}键。 # 在3D视图中点击第一个点，或输入..."
• 03:0603:06, 28 July 2019 diff hist +2‎ Draft Arc 3Points/zh-cn ‎ Created page with "==属性== 弧对象享有Draft Circle中的所有属性，但是有些属性仅对圆形而言才有意义。"
• 03:0603:06, 28 July 2019 diff hist +114‎ N Translations:Draft Arc 3Points/10/zh-cn ‎ Created page with "==属性== 弧对象享有Draft Circle中的所有属性，但是有些属性仅对圆形而言才有意义。" current
• 03:0503:05, 28 July 2019 diff hist −3‎ Draft Arc 3Points/zh-cn ‎ Created page with "==脚本== {{Emphasis|参见:}} Draft API 与 FreeCAD Scripting Basics。"
• 03:0503:05, 28 July 2019 diff hist +81‎ N Translations:Draft Arc 3Points/13/zh-cn ‎ Created page with "==脚本== {{Emphasis|参见:}} Draft API 与 FreeCAD Scripting Basics。" current
• 03:0503:05, 28 July 2019 diff hist −4‎ Draft Arc 3Points/zh-cn ‎ Created page with "==属性=="
• 03:0503:05, 28 July 2019 diff hist +10‎ N Translations:Draft Arc 3Points/9/zh-cn ‎ Created page with "==属性==" current
• 03:0503:05, 28 July 2019 diff hist −1‎ Draft Arc 3Points/zh-cn ‎ Created page with "==选项=="
• 03:0503:05, 28 July 2019 diff hist +10‎ N Translations:Draft Arc 3Points/8/zh-cn ‎ Created page with "==选项==" current
• 03:0503:05, 28 July 2019 diff hist +2‎ Draft Arc 3Points/zh-cn ‎ Created page with "==如何使用=="
• 03:0503:05, 28 July 2019 diff hist +16‎ N Translations:Draft Arc 3Points/6/zh-cn ‎ Created page with "==如何使用==" current
• 03:0403:04, 28 July 2019 diff hist −12‎ Draft Arc 3Points/zh-cn ‎ Created page with "{{Caption|根据圆周上的3个点而定义的弧}}"
• 03:0403:04, 28 July 2019 diff hist +52‎ N Translations:Draft Arc 3Points/5/zh-cn ‎ Created page with "{{Caption|根据圆周上的3个点而定义的弧}}" current
• 03:0403:04, 28 July 2019 diff hist +8‎ Draft Arc 3Points/zh-cn ‎ Created page with "底图三圆周点绘弧工具通过输入4个点：中点、半径、第一个点、最后一点，或拾取的切线，或上述若干组合，在当..."
• 03:0403:04, 28 July 2019 diff hist +318‎ N Translations:Draft Arc 3Points/4/zh-cn ‎ Created page with "底图三圆周点绘弧工具通过输入4个点：中点、半径、第一个点、最后一点，或拾取的切线，或上述若干组合，在当..."
• 02:5902:59, 28 July 2019 diff hist −5‎ Draft Arc 3Points/zh-cn ‎ Created page with "==描述=="
• 02:5902:59, 28 July 2019 diff hist +10‎ N Translations:Draft Arc 3Points/3/zh-cn ‎ Created page with "==描述==" current
• 02:5802:58, 28 July 2019 diff hist +1,788‎ N Draft Arc 3Points/zh-cn ‎ Created page with "底图三圆周点绘弧"
• 02:5802:58, 28 July 2019 diff hist +24‎ N Translations:Draft Arc 3Points/Page display title/zh-cn ‎ Created page with "底图三圆周点绘弧"
• 02:5602:56, 28 July 2019 diff hist +11‎ Draft Arc/zh-cn ‎ Created page with "在宏中与Python控制台中可使用弧形工具，方法是使用绘制圆的函数，再辅以额外的参数。 参见底图圆形工具..."
• 02:5602:56, 28 July 2019 diff hist +195‎ N Translations:Draft Arc/15/zh-cn ‎ Created page with "在宏中与Python控制台中可使用弧形工具，方法是使用绘制圆的函数，再辅以额外的参数。 参见底图圆形工具..."
• 02:5202:52, 28 July 2019 diff hist −18‎ Draft Arc/zh-cn ‎ Created page with "* {{PropertyView|Pattern}}: 指定底图图案，用它来填充弧面。只有当目标弧为完整的圆，{{PropertyData|Make Face}}为{{TRUE}}且{{Proper..."
• 02:5202:52, 28 July 2019 diff hist +323‎ N Translations:Draft Arc/14/zh-cn ‎ Created page with "* {{PropertyView|Pattern}}: 指定底图图案，用它来填充弧面。只有当目标弧为完整的圆，{{PropertyData|Make Face}}为{{TRUE}}且{{Proper..."
• 02:4902:49, 28 July 2019 diff hist −31‎ Draft Arc/zh-cn ‎ Created page with "===Data=== * {{PropertyData|First Angle}}: 指定弧上第一个点的角度。 * {{PropertyData|Last Angle}}: 指定弧上最后一点的角度。 * {{PropertyData|Radius}}:..."
• 02:4902:49, 28 July 2019 diff hist +576‎ N Translations:Draft Arc/13/zh-cn ‎ Created page with "===Data=== * {{PropertyData|First Angle}}: 指定弧上第一个点的角度。 * {{PropertyData|Last Angle}}: 指定弧上最后一点的角度。 * {{PropertyData|Radius}}:..."
• 02:4102:41, 28 July 2019 diff hist −15‎ Image Workbench/zh-cn ‎No edit summary
• 02:4102:41, 28 July 2019 diff hist −15‎ Translations:Image Workbench/12/zh-cn ‎No edit summary
• 02:3902:39, 28 July 2019 diff hist −16‎ Image CreateImagePlane/zh-cn ‎ Created page with "{{Properties Title|Image Plane}} * {{PropertyData|XSize}}: 指定图像平面的宽度。 * {{PropertyData|YSize}}: 指定图像平面的高度。 * {{PropertyData|Image Plane..."
• 02:3902:39, 28 July 2019 diff hist +224‎ N Translations:Image CreateImagePlane/11/zh-cn ‎ Created page with "{{Properties Title|Image Plane}} * {{PropertyData|XSize}}: 指定图像平面的宽度。 * {{PropertyData|YSize}}: 指定图像平面的高度。 * {{PropertyData|Image Plane..." current
• 02:3802:38, 28 July 2019 diff hist −52‎ Image CreateImagePlane/zh-cn ‎ Created page with "{{Properties Title|Base}} * {{PropertyData|Position}}: 指定图像平面的基准点（base point）坐标。 * {{PropertyData|Angle}}: 指定图像平面的旋转角度。 *..."
• 02:3802:38, 28 July 2019 diff hist +217‎ N Translations:Image CreateImagePlane/10/zh-cn ‎ Created page with "{{Properties Title|Base}} * {{PropertyData|Position}}: 指定图像平面的基准点（base point）坐标。 * {{PropertyData|Angle}}: 指定图像平面的旋转角度。 *..." current
• 02:3402:34, 28 July 2019 diff hist −4‎ Image CreateImagePlane/zh-cn ‎ Created page with "==属性=="
• 02:3402:34, 28 July 2019 diff hist +10‎ N Translations:Image CreateImagePlane/9/zh-cn ‎ Created page with "==属性==" current
• 02:3402:34, 28 July 2019 diff hist +14‎ Image CreateImagePlane/zh-cn ‎ Created page with "如果在导入图片伊始没有添加偏移量，其位置仍可通过属性编辑器进行调整。"
• 02:3402:34, 28 July 2019 diff hist +122‎ N Translations:Image CreateImagePlane/8/zh-cn ‎ Created page with "如果在导入图片伊始没有添加偏移量，其位置仍可通过属性编辑器进行调整。" current
• 02:3202:32, 28 July 2019 diff hist +10‎ Image CreateImagePlane/zh-cn ‎ Created page with "在导入图像时，为了令图像稍处于工作平面之后，您应当为之添加{{incode|-0.1 mm}}的偏移量；这将令采用底图或Sketcher Wor..."
• 02:3202:32, 28 July 2019 diff hist +280‎ N Translations:Image CreateImagePlane/7/zh-cn ‎ Created page with "在导入图像时，为了令图像稍处于工作平面之后，您应当为之添加{{incode|-0.1 mm}}的偏移量；这将令采用底图或Sketcher Wor..."
• 02:2802:28, 28 July 2019 diff hist +9‎ Image CreateImagePlane/zh-cn ‎ Created page with "生成的ImagePlane（图像平面）对象所采用的比例是1像素:1毫米；为了令图像显示效果更佳，应当令其具有足够的分辨率。"
• 02:2802:28, 28 July 2019 diff hist +157‎ N Translations:Image CreateImagePlane/6/zh-cn ‎ Created page with "生成的ImagePlane（图像平面）对象所采用的比例是1像素:1毫米；为了令图像显示效果更佳，应当令其具有足够的分辨率。" current
• 02:1702:17, 28 July 2019 diff hist −21‎ Image CreateImagePlane/zh-cn ‎ Created page with "# 按下{{Button|16px Image Plane}}按钮。 # 从系统中选择希望导入的图像。 # 选择放置图像..."
• 02:1702:17, 28 July 2019 diff hist +229‎ N Translations:Image CreateImagePlane/5/zh-cn ‎ Created page with "# 按下{{Button|16px Image Plane}}按钮。 # 从系统中选择希望导入的图像。 # 选择放置图像..." current
• 02:1102:11, 28 July 2019 diff hist +6‎ Image CreateImagePlane/zh-cn ‎ Created page with "利用创建图像平面工具可导入位图图像，并将它置于XY、YZ或XZ平面之中。"
• 02:1102:11, 28 July 2019 diff hist +16‎ N Translations:Image CreateImagePlane/4/zh-cn ‎ Created page with "==如何使用==" current
• 02:1102:11, 28 July 2019 diff hist +134‎ N Translations:Image CreateImagePlane/3/zh-cn ‎ Created page with "利用创建图像平面工具可导入位图图像，并将它置于XY、YZ或XZ平面之中。" current
• 02:1002:10, 28 July 2019 diff hist −5‎ Image CreateImagePlane/zh-cn ‎ Created page with "== 描述 =="
• 02:1002:10, 28 July 2019 diff hist +12‎ N Translations:Image CreateImagePlane/2/zh-cn ‎ Created page with "== 描述 ==" current
• 02:1002:10, 28 July 2019 diff hist +2,038‎ N Image CreateImagePlane/zh-cn ‎ Created page with "创建图像平面工具"
• 02:1002:10, 28 July 2019 diff hist +24‎ N Translations:Image CreateImagePlane/Page display title/zh-cn ‎ Created page with "创建图像平面工具" current
• 02:0502:05, 28 July 2019 diff hist −3‎ Image Scaling/zh-cn ‎ Created page with "# 按下{{Button|16px Scaling}}按钮。 # 在3D视图中点击第一个点。 # 于3D视图中点击第二个点。 # 在模型..."
• 02:0502:05, 28 July 2019 diff hist +389‎ N Translations:Image Scaling/5/zh-cn ‎ Created page with "# 按下{{Button|16px Scaling}}按钮。 # 在3D视图中点击第一个点。 # 于3D视图中点击第二个点。 # 在模型..." current
• 02:0302:03, 28 July 2019 diff hist +3‎ Image Open/zh-cn ‎No edit summary
• 02:0302:03, 28 July 2019 diff hist +3‎ Translations:Image Open/5/zh-cn ‎No edit summary current
• 02:0202:02, 28 July 2019 diff hist +6‎ Image Scaling/zh-cn ‎ Created page with "== 如何使用 =="
• 02:0202:02, 28 July 2019 diff hist +18‎ N Translations:Image Scaling/4/zh-cn ‎ Created page with "== 如何使用 ==" current
• 02:0202:02, 28 July 2019 diff hist +132‎ N Translations:Image Scaling/3/zh-cn ‎ Created page with "利用图像缩放工具可对图像平面工具所导入的图像进行缩放处理。" current
• 02:0002:00, 28 July 2019 diff hist −5‎ Image Scaling/zh-cn ‎ Created page with "==描述=="
• 02:0002:00, 28 July 2019 diff hist +10‎ N Translations:Image Scaling/2/zh-cn ‎ Created page with "==描述==" current
• 02:0002:00, 28 July 2019 diff hist +1,091‎ N Image Scaling/zh-cn ‎ Created page with "图像缩放工具"
• 02:0002:00, 28 July 2019 diff hist +18‎ N Translations:Image Scaling/Page display title/zh-cn ‎ Created page with "图像缩放工具" current
• 01:5901:59, 28 July 2019 diff hist +13‎ Image Open/zh-cn ‎ Created page with "目标图像将位于一个新的视口之中，而非3D视图之内。"
• 01:5901:59, 28 July 2019 diff hist +71‎ N Translations:Image Open/6/zh-cn ‎ Created page with "目标图像将位于一个新的视口之中，而非3D视图之内。" current
• 01:5801:58, 28 July 2019 diff hist −6‎ Image Open/zh-cn ‎ Created page with "# 按下{{Button|16px Image Open}}键。 # 选择您想打开的图像文件。"
• 01:5801:58, 28 July 2019 diff hist +119‎ N Translations:Image Open/5/zh-cn ‎ Created page with "# 按下{{Button|16px Image Open}}键。 # 选择您想打开的图像文件。"
• 01:5701:57, 28 July 2019 diff hist +2‎ Image Open/zh-cn ‎ Created page with "== 如何使用 =="
• 01:5701:57, 28 July 2019 diff hist +18‎ N Translations:Image Open/4/zh-cn ‎ Created page with "== 如何使用 ==" current
• 01:5701:57, 28 July 2019 diff hist +14‎ Image Open/zh-cn ‎ Created page with "图像打开工具只是简单地在视口中的新选项卡内打开用户系统里的一张图像。"
• 01:5701:57, 28 July 2019 diff hist +117‎ N Translations:Image Open/3/zh-cn ‎ Created page with "图像打开工具只是简单地在视口中的新选项卡内打开用户系统里的一张图像。" current
• 01:5301:53, 28 July 2019 diff hist −5‎ Image Open/zh-cn ‎ Created page with "== 描述 =="
• 01:5301:53, 28 July 2019 diff hist +12‎ N Translations:Image Open/2/zh-cn ‎ Created page with "== 描述 ==" current
• 01:5301:53, 28 July 2019 diff hist +812‎ N Image Open/zh-cn ‎ Created page with "图像打开工具"
• 01:5301:53, 28 July 2019 diff hist +18‎ N Translations:Image Open/Page display title/zh-cn ‎ Created page with "图像打开工具" current

27 July 2019

• 10:1910:19, 27 July 2019 diff hist +27‎ Image Workbench/zh-cn ‎ Created page with "可在导入图像时设置其偏移量，或者在后面的处理流程中通过修改其属性来实现这一点。"
• 10:1910:19, 27 July 2019 diff hist +117‎ N Translations:Image Workbench/16/zh-cn ‎ Created page with "可在导入图像时设置其偏移量，或者在后面的处理流程中通过修改其属性来实现这一点。"
• 10:1810:18, 27 July 2019 diff hist −15‎ Image Workbench/zh-cn ‎ Created page with "若要进行描边处理，最好是令图像距工作平面有个较小的负偏移量，例如-0.1 mm。这就意味着图像将稍稍偏于绘制2D几何图形平面的后..."
• 10:1810:18, 27 July 2019 diff hist +237‎ N Translations:Image Workbench/15/zh-cn ‎ Created page with "若要进行描边处理，最好是令图像距工作平面有个较小的负偏移量，例如-0.1 mm。这就意味着图像将稍稍偏于绘制2D几何图形平面的后..."
• 09:5809:58, 27 July 2019 diff hist +3‎ Image Workbench/zh-cn ‎ Created page with "== 工作流程 == 图形工作台的一个主要用途就是借助底图或草图工具对目标图像进行描边，即为了基..."
• 09:5809:58, 27 July 2019 diff hist +221‎ N Translations:Image Workbench/7/zh-cn ‎ Created page with "== 工作流程 == 图形工作台的一个主要用途就是借助底图或草图工具对目标图像进行描边，即为了基..."
• 09:5409:54, 27 July 2019 diff hist −44‎ Image Workbench/zh-cn ‎ Created page with "* 与草图相似，我们可将导入的图像附于XY，XZ或YZ主平面之一，并为之调整正、负偏移值。 * The image is imported with rel..."
• 09:5409:54, 27 July 2019 diff hist +256‎ N Translations:Image Workbench/12/zh-cn ‎ Created page with "* 与草图相似，我们可将导入的图像附于XY，XZ或YZ主平面之一，并为之调整正、负偏移值。 * The image is imported with rel..."
• 09:3909:39, 27 July 2019 diff hist −2‎ Image Workbench/zh-cn ‎ Created page with "== 特性 =="
• 09:3909:39, 27 July 2019 diff hist +12‎ N Translations:Image Workbench/11/zh-cn ‎ Created page with "== 特性 =="
• 09:3909:39, 27 July 2019 diff hist +19‎ Image Workbench/zh-cn ‎ Created page with "* 32px Open: 在新的视口中打开图像。 * 32px Import to plane:..."
• 09:3909:39, 27 July 2019 diff hist +332‎ N Translations:Image Workbench/9/zh-cn ‎ Created page with "* 32px Open: 在新的视口中打开图像。 * 32px Import to plane:..."
• 09:3609:36, 27 July 2019 diff hist +1‎ Image Workbench/zh-cn ‎ Created page with "== 工具 =="
• 09:3609:36, 27 July 2019 diff hist +12‎ N Translations:Image Workbench/14/zh-cn ‎ Created page with "== 工具 =="
• 09:3609:36, 27 July 2019 diff hist −6‎ Image Workbench/zh-cn ‎ Created page with "目前，该模块已支持打开BMP，JPG，PNG与XPM文件格式。"
• 09:3609:36, 27 July 2019 diff hist +69‎ N Translations:Image Workbench/10/zh-cn ‎ Created page with "目前，该模块已支持打开BMP，JPG，PNG与XPM文件格式。"
• 09:3509:35, 27 July 2019 diff hist +28‎ Image Workbench/zh-cn ‎ Created page with "{{TOCright}} 图像工作台用于管理不同类型的位图图像，用户可借此在FreeCAD中打开这些图像。"
• 09:3509:35, 27 July 2019 diff hist +150‎ N Translations:Image Workbench/1/zh-cn ‎ Created page with "{{TOCright}} 图像工作台用于管理不同类型的位图图像，用户可借此在FreeCAD中打开这些图像。"
• 09:3409:34, 27 July 2019 diff hist −6‎ Image Workbench/zh-cn ‎ Created page with "== 简介 =="
• 09:3409:34, 27 July 2019 diff hist +12‎ N Translations:Image Workbench/13/zh-cn ‎ Created page with "== 简介 =="
• 09:3409:34, 27 July 2019 diff hist +12‎ N Translations:Image Workbench/Page display title/zh-cn ‎ Created page with "图像模块"
• 05:4605:46, 27 July 2019 diff hist −16‎ Placement/zh-cn ‎ Created page with "==Placement对话框== 利用'''Edit'''菜单就可以调出Placement对话框。通常用此对话框来精确地旋转/平移对象。另外，它还可用于：在一个“..."
• 05:4605:46, 27 July 2019 diff hist +532‎ N Translations:Placement/13/zh-cn ‎ Created page with "==Placement对话框== 利用'''Edit'''菜单就可以调出Placement对话框。通常用此对话框来精确地旋转/平移对象。另外，它还可用于：在一个“..." current
• 05:2905:29, 27 July 2019 diff hist +99‎ Part Extrude/zh-cn ‎ Created page with "除了实体与复合实体（compsolid）以外，零件挤型工具能够对任意有着零件几何体（OCC形状）的对象执行挤压成型操作。另外，此工具..."
• 05:2905:29, 27 July 2019 diff hist +383‎ N Translations:Part Extrude/44/zh-cn ‎ Created page with "除了实体与复合实体（compsolid）以外，零件挤型工具能够对任意有着零件几何体（OCC形状）的对象执行挤压成型操作。另外，此工具..." current
• 05:1605:16, 27 July 2019 diff hist +18‎ Part Extrude/zh-cn ‎ Created page with "零件挤型工具并不关心对象在模型树中的具体位置。而PartDesign Pad却只能存在于PartDesign Body中。"
• 05:1605:16, 27 July 2019 diff hist +129‎ N Translations:Part Extrude/43/zh-cn ‎ Created page with "零件挤型工具并不关心对象在模型树中的具体位置。而PartDesign Pad却只能存在于PartDesign Body中。" current
• 05:1305:13, 27 July 2019 diff hist +20‎ Part Extrude/zh-cn ‎ Created page with "零件挤型工具总是创建孤立的形状。而PartDesign Pad则把挤压成型的独立形状与其余体对象融合在一起。"
• 05:1305:13, 27 July 2019 diff hist +134‎ N Translations:Part Extrude/42/zh-cn ‎ Created page with "零件挤型工具总是创建孤立的形状。而PartDesign Pad则把挤压成型的独立形状与其余体对象融合在一起。" current
• 05:0305:03, 27 July 2019 diff hist −42‎ Placement/zh-cn ‎ Created page with "第三种指定'''Placement'''的方式是利用一个4x4仿射变换矩阵进行描述([http://en.wikipedia.org/wiki/Affine_transformation 仿射变换])。"
• 05:0305:03, 27 July 2019 diff hist +157‎ N Translations:Placement/11/zh-cn ‎ Created page with "第三种指定'''Placement'''的方式是利用一个4x4仿射变换矩阵进行描述([http://en.wikipedia.org/wiki/Affine_transformation 仿射变换])。" current
• 05:0105:01, 27 July 2019 diff hist 0‎ Placement/zh-cn ‎ Created page with "===矩阵=== '''Placement = Matrix'''"
• 05:0105:01, 27 July 2019 diff hist +37‎ N Translations:Placement/10/zh-cn ‎ Created page with "===矩阵=== '''Placement = Matrix'''" current
• 05:0105:01, 27 July 2019 diff hist −12‎ Placement/zh-cn ‎ Created page with "left'''Roll'''为绕'''X轴'''进行旋转，可以说是机翼上下翻转。<br />（Roll角为'''Thêta θ'''）。 {{clear}}"
• 05:0105:01, 27 July 2019 diff hist +173‎ N Translations:Placement/26/zh-cn ‎ Created page with "left'''Roll'''为绕'''X轴'''进行旋转，可以说是机翼上下翻转。<br />（Roll角为'''Thêta θ'''）。 {{clear}}" current
• 04:5804:58, 27 July 2019 diff hist −20‎ Placement/zh-cn ‎ Created page with "left'''Pitch'''为绕'''Y轴'''进行旋转，可以说是上仰与下俯。<br />（Pitch角为'''Phi φ'''）。 {{clear}}"
• 04:5804:58, 27 July 2019 diff hist +170‎ N Translations:Placement/25/zh-cn ‎ Created page with "left'''Pitch'''为绕'''Y轴'''进行旋转，可以说是上仰与下俯。<br />（Pitch角为'''Phi φ'''）。 {{clear}}" current
• 04:5804:58, 27 July 2019 diff hist −3‎ Placement/zh-cn ‎No edit summary
• 04:5804:58, 27 July 2019 diff hist −3‎ Translations:Placement/24/zh-cn ‎No edit summary current
• 04:4804:48, 27 July 2019 diff hist −17‎ Placement/zh-cn ‎ Created page with "left'''Yaw'''为绕'''Z轴'''进行旋转，可以说是从左至右的旋转操作。<br />（偏转角为'''Psi ψ'''）。 {{cle..."
• 04:4804:48, 27 July 2019 diff hist +179‎ N Translations:Placement/24/zh-cn ‎ Created page with "left'''Yaw'''为绕'''Z轴'''进行旋转，可以说是从左至右的旋转操作。<br />（偏转角为'''Psi ψ'''）。 {{cle..."
• 04:4304:43, 27 July 2019 diff hist −2‎ Placement/zh-cn ‎ Created page with "App.Rotation(10,20,30) = 欧拉角"
• 04:4304:43, 27 July 2019 diff hist +34‎ N Translations:Placement/27/zh-cn ‎ Created page with "App.Rotation(10,20,30) = 欧拉角" current
• 04:4204:42, 27 July 2019 diff hist −1‎ Placement/zh-cn ‎ Created page with "'''Yaw-Pitch-Roll = (y,p,r)'''是一个指定目标对象姿态的三元组。y、p、r三值分别用于指定对象绕z、y、x三轴旋转的角度（参考备注）。 {..."
• 04:4204:42, 27 July 2019 diff hist +327‎ N Translations:Placement/9/zh-cn ‎ Created page with "'''Yaw-Pitch-Roll = (y,p,r)'''是一个指定目标对象姿态的三元组。y、p、r三值分别用于指定对象绕z、y、x三轴旋转的角度（参考备注）。 {..." current
• 04:3804:38, 27 July 2019 diff hist +9‎ Placement/zh-cn ‎No edit summary
• 04:3804:38, 27 July 2019 diff hist +9‎ Translations:Placement/40/zh-cn ‎No edit summary current
• 04:3804:38, 27 July 2019 diff hist +10‎ Placement/zh-cn ‎ Created page with "'''Position = (x,y,z)'''为一个向量，描述目标对象几何体的位置（事实上，对于对象而言，此为其“局部原点（local origin）”）。"
• 04:3804:38, 27 July 2019 diff hist +165‎ N Translations:Placement/8/zh-cn ‎ Created page with "'''Position = (x,y,z)'''为一个向量，描述目标对象几何体的位置（事实上，对于对象而言，此为其“局部原点（local origin）”）。" current
• 04:3704:37, 27 July 2019 diff hist −12‎ Placement/zh-cn ‎No edit summary
• 04:3704:37, 27 July 2019 diff hist −12‎ Translations:Placement/40/zh-cn ‎No edit summary
• 04:3204:32, 27 July 2019 diff hist +62‎ Placement/zh-cn ‎ Created page with "这种指定'''Placement'''的第二种形式，除了用Position属性（与第一种形式中的意义相同）来修改目标对象的空间位置之外，还将以Yaw（..."
• 04:3204:32, 27 July 2019 diff hist +531‎ N Translations:Placement/7/zh-cn ‎ Created page with "这种指定'''Placement'''的第二种形式，除了用Position属性（与第一种形式中的意义相同）来修改目标对象的空间位置之外，还将以Yaw（..." current
• 03:2303:23, 27 July 2019 diff hist −5‎ Placement/zh-cn ‎ Created page with "'''Roll''' = 30度 ('''X''')"
• 03:2303:23, 27 July 2019 diff hist +28‎ N Translations:Placement/30/zh-cn ‎ Created page with "'''Roll''' = 30度 ('''X''')" current
• 03:2303:23, 27 July 2019 diff hist −5‎ Placement/zh-cn ‎ Created page with "'''Pitch''' = 20度 ('''Y''')"
• 03:2303:23, 27 July 2019 diff hist +29‎ N Translations:Placement/29/zh-cn ‎ Created page with "'''Pitch''' = 20度 ('''Y''')" current
• 03:2303:23, 27 July 2019 diff hist −5‎ Placement/zh-cn ‎ Created page with "'''Yaw''' = 10度 ('''Z''')"
• 03:2303:23, 27 July 2019 diff hist +27‎ N Translations:Placement/28/zh-cn ‎ Created page with "'''Yaw''' = 10度 ('''Z''')" current
• 03:2103:21, 27 July 2019 diff hist +10‎ Placement/zh-cn ‎ Created page with "===Position与Yaw，Pitch与Roll=== frame|left|采用Euler angles选项的方位对话框 {{clear}} '''Placement = [Position, Yaw-Pitch-Roll]'''"
• 03:2103:21, 27 July 2019 diff hist +178‎ N Translations:Placement/6/zh-cn ‎ Created page with "===Position与Yaw，Pitch与Roll=== frame|left|采用Euler angles选项的方位对话框 {{clear}} '''Placement = [Position, Yaw-Pitch-Roll]'''" current
• 03:2003:20, 27 July 2019 diff hist −133‎ Placement/zh-cn ‎ Created page with "请注意，也可以令对象沿此旋转轴进行平移（移动，轴向移动），方法是：在Axial框中输入移动距离，再点击Apply axial按钮。（可以这..."
• 03:2003:20, 27 July 2019 diff hist +959‎ N Translations:Placement/40/zh-cn ‎ Created page with "请注意，也可以令对象沿此旋转轴进行平移（移动，轴向移动），方法是：在Axial框中输入移动距离，再点击Apply axial按钮。（可以这..."
• 02:5702:57, 27 July 2019 diff hist −12‎ Placement/zh-cn ‎No edit summary
• 02:5702:57, 27 July 2019 diff hist −12‎ Translations:Placement/37/zh-cn ‎No edit summary current
• 02:5702:57, 27 July 2019 diff hist −6‎ Placement/zh-cn ‎No edit summary
• 02:5702:57, 27 July 2019 diff hist −6‎ Translations:Placement/5/zh-cn ‎No edit summary current
• 01:4101:41, 27 July 2019 diff hist +19‎ Placement/zh-cn ‎ Created page with "'''Axis = (ax,ay,az)'''是一个向量，描述的是旋转轴（参见关于旋转轴的备注）。以下为示例： (1,0,0) ==> 关于'''X'''轴旋转 (0,1..."
• 01:4101:41, 27 July 2019 diff hist +306‎ N Translations:Placement/37/zh-cn ‎ Created page with "'''Axis = (ax,ay,az)'''是一个向量，描述的是旋转轴（参见关于旋转轴的备注）。以下为示例： (1,0,0) ==> 关于'''X'''轴旋转 (0,1..."
• 01:2501:25, 27 July 2019 diff hist +8‎ Placement/zh-cn ‎ Created page with "这种指定'''Placement'''的第一种形式，将以Position来修改对象的空间位置，再以关于Axis的单个旋转操作来描述其朝向。 '''Angle = r'''为..."
• 01:2501:25, 27 July 2019 diff hist +305‎ N Translations:Placement/5/zh-cn ‎ Created page with "这种指定'''Placement'''的第一种形式，将以Position来修改对象的空间位置，再以关于Axis的单个旋转操作来描述其朝向。 '''Angle = r'''为..."
• 01:1901:19, 27 July 2019 diff hist +5‎ Placement/zh-cn ‎ Created page with "===Angle，Axis与Position属性=== '''Placement = [Angle, Axis, Position]'''"
• 01:1901:19, 27 July 2019 diff hist +77‎ N Translations:Placement/31/zh-cn ‎ Created page with "===Angle，Axis与Position属性=== '''Placement = [Angle, Axis, Position]'''" current
• 01:1901:19, 27 July 2019 diff hist +36‎ Placement/zh-cn ‎ Created page with "frame|left|采用Rotation axis with angle选项的方位对话框 {{clear}} ==指定方位的方式== 方位属性在内部实现会存作..."
• 01:1901:19, 27 July 2019 diff hist +697‎ N Translations:Placement/4/zh-cn ‎ Created page with "frame|left|采用Rotation axis with angle选项的方位对话框 {{clear}} ==指定方位的方式== 方位属性在内部实现会存作..." current

21 July 2019

• 01:2501:25, 21 July 2019 diff hist +5‎ Part Extrude/zh-cn ‎ Created page with "* Apply: 创建挤型对象，却并不关闭此对话框。您可以继续在下侧的列表中选择另一个形状，以此创建更多的挤型对象。点击Apply可以..."
• 01:2501:25, 21 July 2019 diff hist +206‎ N Translations:Part Extrude/27/zh-cn ‎ Created page with "* Apply: 创建挤型对象，却并不关闭此对话框。您可以继续在下侧的列表中选择另一个形状，以此创建更多的挤型对象。点击Apply可以..." current
• 01:2201:22, 21 July 2019 diff hist −16‎ Part Extrude/zh-cn ‎ Created page with "* Shape list: 在此选择待挤型的形状。如果选中了多个形状，则将创建多个挤型对象。"
• 01:2201:22, 21 July 2019 diff hist +110‎ N Translations:Part Extrude/36/zh-cn ‎ Created page with "* Shape list: 在此选择待挤型的形状。如果选中了多个形状，则将创建多个挤型对象。" current
• 01:2101:21, 21 July 2019 diff hist +43‎ Part Extrude/zh-cn ‎ Created page with "* Create Solid checkbox: 如果选中此项，对一条闭合的连线或边进行挤型将生成一个对应实体。如果在调用挤型工具之前便提前选中了一条..."
• 01:2101:21, 21 July 2019 diff hist +220‎ N Translations:Part Extrude/35/zh-cn ‎ Created page with "* Create Solid checkbox: 如果选中此项，对一条闭合的连线或边进行挤型将生成一个对应实体。如果在调用挤型工具之前便提前选中了一条..." current
• 01:1701:17, 21 July 2019 diff hist +4‎ Part Extrude/zh-cn ‎ Created page with "* Length fields: 设置挤型的长度。此输入框支持用户输入的单位。"
• 01:1701:17, 21 July 2019 diff hist +83‎ N Translations:Part Extrude/32/zh-cn ‎ Created page with "* Length fields: 设置挤型的长度。此输入框支持用户输入的单位。" current
• 01:1301:13, 21 July 2019 diff hist +27‎ Placement/zh-cn ‎ Created page with "frame|left|以脚本的方式利用y/p/r参数、矩阵与[[Placement_API|定位API来调整方位属性。]] {{clear}}"
• 01:1301:13, 21 July 2019 diff hist +147‎ N Translations:Placement/3/zh-cn ‎ Created page with "frame|left|以脚本的方式利用y/p/r参数、矩阵与[[Placement_API|定位API来调整方位属性。]] {{clear}}" current
• 01:0701:07, 21 July 2019 diff hist +7‎ Placement/zh-cn ‎ Created page with "frame|left|位于属性面板中的方位属性 {{clear}}"
• 01:0701:07, 21 July 2019 diff hist +102‎ N Translations:Placement/2/zh-cn ‎ Created page with "frame|left|位于属性面板中的方位属性 {{clear}}" current
• 01:0601:06, 21 July 2019 diff hist −22‎ Placement/zh-cn ‎ Created page with "==概述== '''Placement'''是用户在FreeCAD中指定目标对象在空间中位置与姿态（朝向）的手段。指定方位属性的方式多种多样，例如通过 P..."
• 01:0601:06, 21 July 2019 diff hist +408‎ N Translations:Placement/1/zh-cn ‎ Created page with "==概述== '''Placement'''是用户在FreeCAD中指定目标对象在空间中位置与姿态（朝向）的手段。指定方位属性的方式多种多样，例如通过 P..." current
• 01:0201:02, 21 July 2019 diff hist 0‎ Translations:Placement/Page display title/zh-cn ‎No edit summary current
• 00:5900:59, 21 July 2019 diff hist +18,071‎ N Placement/zh-cn ‎ Created page with "定位"
• 00:5900:59, 21 July 2019 diff hist +6‎ N Translations:Placement/Page display title/zh-cn ‎ Created page with "定位"
• 00:5800:58, 21 July 2019 diff hist +27‎ Part Extrude/zh-cn ‎ Created page with "* Symmetric: 以对称的方式向指定方向及其反向进行挤型，因此输入形状将位于生成挤型对象的中部。"
• 00:5800:58, 21 July 2019 diff hist +130‎ N Translations:Part Extrude/33/zh-cn ‎ Created page with "* Symmetric: 以对称的方式向指定方向及其反向进行挤型，因此输入形状将位于生成挤型对象的中部。" current
• 00:5500:55, 21 July 2019 diff hist +11‎ Part Extrude/zh-cn ‎ Created page with "PartDesign Pad也是一种挤型功能，但是与本页描述的挤型工具大有不同。"
• 00:5500:55, 21 July 2019 diff hist +92‎ N Translations:Part Extrude/41/zh-cn ‎ Created page with "PartDesign Pad也是一种挤型功能，但是与本页描述的挤型工具大有不同。" current
• 00:5400:54, 21 July 2019 diff hist −4‎ Part Extrude/zh-cn ‎ Created page with "== 与PartDesign Pad的比较 =="
• 00:5400:54, 21 July 2019 diff hist +36‎ N Translations:Part Extrude/40/zh-cn ‎ Created page with "== 与PartDesign Pad的比较 ==" current
• 00:5400:54, 21 July 2019 diff hist +11‎ Part Extrude/zh-cn ‎ Created page with "* X, Y, Z 按钮：点击X按钮来设置+X轴上的挤型方向。再次点击则设置-X轴上的挤型方向。"
• 00:5400:54, 21 July 2019 diff hist +114‎ N Translations:Part Extrude/30/zh-cn ‎ Created page with "* X, Y, Z 按钮：点击X按钮来设置+X轴上的挤型方向。再次点击则设置-X轴上的挤型方向。" current
• 00:5100:51, 21 July 2019 diff hist −8‎ Part Extrude/zh-cn ‎ Created page with "* 'Direction' 单选按钮：设置计算挤型方向的方式。"
• 00:5100:51, 21 July 2019 diff hist +65‎ N Translations:Part Extrude/28/zh-cn ‎ Created page with "* 'Direction' 单选按钮：设置计算挤型方向的方式。" current
• 00:5000:50, 21 July 2019 diff hist −2‎ Part Extrude/zh-cn ‎ Created page with "* Close: 关闭对话框，神马也不做。"
• 00:5000:50, 21 July 2019 diff hist +45‎ N Translations:Part Extrude/26/zh-cn ‎ Created page with "* Close: 关闭对话框，神马也不做。" current
• 00:5000:50, 21 July 2019 diff hist −3‎ Part Extrude/zh-cn ‎ Created page with "* OK: 创建挤型对象，并关闭对话框。"
• 00:5000:50, 21 July 2019 diff hist +48‎ N Translations:Part Extrude/25/zh-cn ‎ Created page with "* OK: 创建挤型对象，并关闭对话框。" current
• 00:4900:49, 21 July 2019 diff hist −2‎ Part Extrude/zh-cn ‎ Created page with "*'''Label''': 显示在模型树中的标签（创建挤型对象后方可使用）"
• 00:4900:49, 21 July 2019 diff hist +83‎ N Translations:Part Extrude/22/zh-cn ‎ Created page with "*'''Label''': 显示在模型树中的标签（创建挤型对象后方可使用）" current
• 00:4700:47, 21 July 2019 diff hist −9‎ Part Extrude/zh-cn ‎ Created page with "*'''Placement''': 标准的定位参数集"
• 00:4700:47, 21 July 2019 diff hist +56‎ N Translations:Part Extrude/21/zh-cn ‎ Created page with "*'''Placement''': 标准的定位参数集" current
• 00:4600:46, 21 July 2019 diff hist +48‎ Part Extrude/zh-cn ‎ Created page with "*'''Symmetric''': 如果此项为True，则以输入形状为中心向指定方向及其相反方向进行挤型，且挤型总长度为'''Length Fwd'''。并忽略'''Length R..."
• 00:4600:46, 21 July 2019 diff hist +183‎ N Translations:Part Extrude/18/zh-cn ‎ Created page with "*'''Symmetric''': 如果此项为True，则以输入形状为中心向指定方向及其相反方向进行挤型，且挤型总长度为'''Length Fwd'''。并忽略'''Length R..." current
• 00:4100:41, 21 July 2019 diff hist +2‎ Part Extrude/zh-cn ‎ Created page with "== Task对话框 =="
• 00:4100:41, 21 July 2019 diff hist +19‎ N Translations:Part Extrude/23/zh-cn ‎ Created page with "== Task对话框 ==" current
• 00:4100:41, 21 July 2019 diff hist +4‎ Part Extrude/zh-cn ‎ Created page with "*'''Reversed''': 将挤型对象调转至'''Dir'''的相反方向。"
• 00:4100:41, 21 July 2019 diff hist +68‎ N Translations:Part Extrude/17/zh-cn ‎ Created page with "*'''Reversed''': 将挤型对象调转至'''Dir'''的相反方向。" current
• 00:3900:39, 21 July 2019 diff hist +59‎ Part Extrude/zh-cn ‎ Created page with "*'''Solid''': 如果此项为True，对一条闭合边或一条闭合连线进行挤型，将生成一个对应实体。如果此项为False，则生成一个对应的壳。"
• 00:3900:39, 21 July 2019 diff hist +173‎ N Translations:Part Extrude/16/zh-cn ‎ Created page with "*'''Solid''': 如果此项为True，对一条闭合边或一条闭合连线进行挤型，将生成一个对应实体。如果此项为False，则生成一个对应的壳。" current
• 00:3800:38, 21 July 2019 diff hist +4‎ Part Extrude/zh-cn ‎ Created page with "*'''Length Rev''': 另一种与'''Dir'''方向相反的挤型长度。"
• 00:3800:38, 21 July 2019 diff hist +70‎ N Translations:Part Extrude/15/zh-cn ‎ Created page with "*'''Length Rev''': 另一种与'''Dir'''方向相反的挤型长度。" current
• 00:3400:34, 21 July 2019 diff hist −18‎ Part Extrude/zh-cn ‎ Created page with "*'''Length Fwd''': 挤型的距离。如果'''Length Fwd'''与'''Length Rev'''皆为0，则采用'''Dir'''向量的长度。"
• 00:3400:34, 21 July 2019 diff hist +124‎ N Translations:Part Extrude/14/zh-cn ‎ Created page with "*'''Length Fwd''': 挤型的距离。如果'''Length Fwd'''与'''Length Rev'''皆为0，则采用'''Dir'''向量的长度。" current
• 00:3300:33, 21 July 2019 diff hist +23‎ Part Extrude/zh-cn ‎ Created page with "*'''Dir Mode''': 设置如何控制'''Dir'''参数。'Custom'选项意味着'''Dir'''是可编辑的。'Edge'表示Dir要通过'''Dir Link'''根据一条待连接的边（线..."
• 00:3200:32, 21 July 2019 diff hist +251‎ N Translations:Part Extrude/13/zh-cn ‎ Created page with "*'''Dir Mode''': 设置如何控制'''Dir'''参数。'Custom'选项意味着'''Dir'''是可编辑的。'Edge'表示Dir要通过'''Dir Link'''根据一条待连接的边（线..." current
• 00:1500:15, 21 July 2019 diff hist +3‎ Part Extrude/zh-cn ‎ Created page with "*'''Dir Link''': 以参数化的方式连接至一条边（线），从而设置挤型方向。自v0.17版起，属性编辑器中不在支持此属性。"
• 00:1400:14, 21 July 2019 diff hist +154‎ N Translations:Part Extrude/12/zh-cn ‎ Created page with "*'''Dir Link''': 以参数化的方式连接至一条边（线），从而设置挤型方向。自v0.17版起，属性编辑器中不在支持此属性。" current
• 00:1300:13, 21 July 2019 diff hist +7‎ Part Extrude/zh-cn ‎ Created page with "*'''Dir''': 挤型方向。如果'''Dir Mode'''为'Custom'，您就可以编辑'''Dir'''。 否则，'''Dir'''仅为只读，且根据连接形状（linked shape）开始计..."
• 00:1300:13, 21 July 2019 diff hist +179‎ N Translations:Part Extrude/11/zh-cn ‎ Created page with "*'''Dir''': 挤型方向。如果'''Dir Mode'''为'Custom'，您就可以编辑'''Dir'''。 否则，'''Dir'''仅为只读，且根据连接形状（linked shape）开始计..." current

20 July 2019

• 23:5723:57, 20 July 2019 diff hist −1‎ Part Extrude/zh-cn ‎ Created page with "*'''Base''': 输入的形状（挤型工具工作时要用到的基本形状）"
• 23:5723:57, 20 July 2019 diff hist +79‎ N Translations:Part Extrude/10/zh-cn ‎ Created page with "*'''Base''': 输入的形状（挤型工具工作时要用到的基本形状）" current
• 23:5423:54, 20 July 2019 diff hist +6‎ Part Extrude/zh-cn ‎ Created page with "== 参数 == 挤型对象由下列参数定义而成，可在创建挤型对象后于数据选项卡中对其参数进行编辑调整。"
• 23:5423:54, 20 July 2019 diff hist +136‎ N Translations:Part Extrude/3/zh-cn ‎ Created page with "== 参数 == 挤型对象由下列参数定义而成，可在创建挤型对象后于数据选项卡中对其参数进行编辑调整。" current
• 23:4723:47, 20 July 2019 diff hist 0‎ Part Extrude/zh-cn ‎No edit summary
• 23:4723:47, 20 July 2019 diff hist 0‎ Translations:Part Extrude/7/zh-cn ‎No edit summary current
• 23:4723:47, 20 July 2019 diff hist +4‎ Part Extrude/zh-cn ‎ Created page with "操作完成后，模型树将列出与被选形状一样多的挤型对象。而每一个输入形状都将被置于其挤型对象之下。"
• 23:4723:47, 20 July 2019 diff hist +141‎ N Translations:Part Extrude/8/zh-cn ‎ Created page with "操作完成后，模型树将列出与被选形状一样多的挤型对象。而每一个输入形状都将被置于其挤型对象之下。" current
• 23:4423:44, 20 July 2019 diff hist −14‎ Part Extrude/zh-cn ‎ Created page with "或者，可以先加载工具，而后再通过任务面板中的列表来选择待挤型的一个或多个对象。"
• 23:4423:44, 20 July 2019 diff hist +117‎ N Translations:Part Extrude/7/zh-cn ‎ Created page with "或者，可以先加载工具，而后再通过任务面板中的列表来选择待挤型的一个或多个对象。"
• 13:1613:16, 20 July 2019 diff hist −2‎ Part Extrude/zh-cn ‎ Created page with "== 如何使用 == # 在3D视图或模型树中选中待挤型的（多个）形状 # 点击工具栏中的{{KEY|16px '''Extrude'''}} 图标，或..."
• 13:1613:16, 20 July 2019 diff hist +345‎ N Translations:Part Extrude/6/zh-cn ‎ Created page with "== 如何使用 == # 在3D视图或模型树中选中待挤型的（多个）形状 # 点击工具栏中的{{KEY|16px '''Extrude'''}} 图标，或..." current
• 13:1313:13, 20 July 2019 diff hist +233‎ Part Extrude/zh-cn ‎ Created page with "下列内容为：在大多常见的情景中，根据指定的输入形状类型可能输出的形状类型， * 对一个顶点（点）进行挤型操作，将生成一..."
• 13:1313:13, 20 July 2019 diff hist +1,217‎ N Translations:Part Extrude/4/zh-cn ‎ Created page with "下列内容为：在大多常见的情景中，根据指定的输入形状类型可能输出的形状类型， * 对一个顶点（点）进行挤型操作，将生成一..." current
• 12:5212:52, 20 July 2019 diff hist +10‎ Part Extrude/zh-cn ‎ Created page with "== 描述 == '''零件挤型'''工具根据用户指定的距离以特定方向将一个形状挤压成型。根据输入的形状类型与可选项的具体选择，输出的..."
• 12:5212:52, 20 July 2019 diff hist +205‎ N Translations:Part Extrude/2/zh-cn ‎ Created page with "== 描述 == '''零件挤型'''工具根据用户指定的距离以特定方向将一个形状挤压成型。根据输入的形状类型与可选项的具体选择，输出的..." current
• 12:4312:43, 20 July 2019 diff hist +7,543‎ N Part Extrude/zh-cn ‎ Created page with "零件挤型"
• 12:4312:43, 20 July 2019 diff hist +12‎ N Translations:Part Extrude/Page display title/zh-cn ‎ Created page with "零件挤型" current
• 09:2809:28, 20 July 2019 diff hist −43‎ Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "==特性== * 长轴与短轴是严格界定的，调整椭圆时并不能交换两者。这是求解器参数化椭圆时所用的信息（中点(x,y)、焦点focus1(x,y)以..."
• 09:2809:28, 20 July 2019 diff hist +544‎ N Translations:Sketcher CreateEllipseByCenter/6/zh-cn ‎ Created page with "==特性== * 长轴与短轴是严格界定的，调整椭圆时并不能交换两者。这是求解器参数化椭圆时所用的信息（中点(x,y)、焦点focus1(x,y)以..." current
• 09:1309:13, 20 July 2019 diff hist +61‎ Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "* 通过点击工具按钮，选择对应菜单项或借助键盘快捷键（首先需要在Interface Customization中为之分配快捷键）来调用对应绘制椭圆..."
• 09:1309:13, 20 July 2019 diff hist +932‎ N Translations:Sketcher CreateEllipseByCenter/8/zh-cn ‎ Created page with "* 通过点击工具按钮，选择对应菜单项或借助键盘快捷键（首先需要在Interface Customization中为之分配快捷键）来调用对应绘制椭圆..."
• 09:1009:10, 20 July 2019 diff hist −6‎ Sketcher CreateEllipseByCenter/zh-cn ‎No edit summary
• 09:1009:10, 20 July 2019 diff hist −6‎ Translations:Sketcher CreateEllipseByCenter/3/zh-cn ‎No edit summary current
• 08:3208:32, 20 July 2019 diff hist +2‎ Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "==如何使用=="
• 08:3208:32, 20 July 2019 diff hist +16‎ N Translations:Sketcher CreateEllipseByCenter/4/zh-cn ‎ Created page with "==如何使用==" current
• 08:3208:32, 20 July 2019 diff hist −4‎ Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "Image:Sketcher_EllipseExample1.png‎|thumb|none|500px|绘制椭圆所选中的一系列点以带数字的黄色箭头表示。C为中点，a - 长半轴，b - 短半轴，F..."
• 08:3208:32, 20 July 2019 diff hist +195‎ N Translations:Sketcher CreateEllipseByCenter/3/zh-cn ‎ Created page with "Image:Sketcher_EllipseExample1.png‎|thumb|none|500px|绘制椭圆所选中的一系列点以带数字的黄色箭头表示。C为中点，a - 长半轴，b - 短半轴，F..."
• 08:2408:24, 20 July 2019 diff hist +14‎ Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "本工具会根据用户拾取的三个点：中点、长半轴点与短半轴点来绘制一个椭圆。 在开启此工具时，鼠标指针会变为一个附有红色椭圆..."
• 08:2408:24, 20 July 2019 diff hist +256‎ N Translations:Sketcher CreateEllipseByCenter/7/zh-cn ‎ Created page with "本工具会根据用户拾取的三个点：中点、长半轴点与短半轴点来绘制一个椭圆。 在开启此工具时，鼠标指针会变为一个附有红色椭圆..." current
• 08:1208:12, 20 July 2019 diff hist −5‎ Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "==描述=="
• 08:1208:12, 20 July 2019 diff hist +10‎ N Translations:Sketcher CreateEllipseByCenter/2/zh-cn ‎ Created page with "==描述==" current
• 08:1208:12, 20 July 2019 diff hist +2,870‎ N Sketcher CreateEllipseByCenter/zh-cn ‎ Created page with "草图工作台中的根据中点创建椭圆工具"
• 08:1208:12, 20 July 2019 diff hist +51‎ N Translations:Sketcher CreateEllipseByCenter/Page display title/zh-cn ‎ Created page with "草图工作台中的根据中点创建椭圆工具"
• 02:5002:50, 20 July 2019 diff hist −25‎ Topological data scripting/zh-cn ‎ Created page with "请注意，也可以直接通过File → Open or File → Import菜单导入或打开BREP、IGES、STEP文件，而通过File → Export菜单来导出。"
• 02:5002:50, 20 July 2019 diff hist +155‎ N Translations:Topological data scripting/106/zh-cn ‎ Created page with "请注意，也可以直接通过File → Open or File → Import菜单导入或打开BREP、IGES、STEP文件，而通过File → Export菜单来导出。" current
• 02:4802:48, 20 July 2019 diff hist +19‎ Topological data scripting/zh-cn ‎ Created page with "为了将一个'''.stp'''文件转换为一个'''.igs'''文件可以："
• 02:4802:48, 20 July 2019 diff hist +71‎ N Translations:Topological data scripting/105/zh-cn ‎ Created page with "为了将一个'''.stp'''文件转换为一个'''.igs'''文件可以：" current
• 02:4802:48, 20 July 2019 diff hist +56‎ Topological data scripting/zh-cn ‎ Created page with "以上做法会将我们创建的立方体保存至一个STEP文件。而为了加载BREP、IGES或STEP文件，我们可以："
• 02:4802:48, 20 July 2019 diff hist +127‎ N Translations:Topological data scripting/104/zh-cn ‎ Created page with "以上做法会将我们创建的立方体保存至一个STEP文件。而为了加载BREP、IGES或STEP文件，我们可以：" current
• 02:4602:46, 20 July 2019 diff hist +38‎ Topological data scripting/zh-cn ‎ Created page with "将一个几何形状保存至文件中是很方便的。FreeCAD针对所有图形提供了exportBrep()、exportIges()、exportStl()与exportStep()方法。因此，可以这..."
• 02:4602:46, 20 July 2019 diff hist +192‎ N Translations:Topological data scripting/103/zh-cn ‎ Created page with "将一个几何形状保存至文件中是很方便的。FreeCAD针对所有图形提供了exportBrep()、exportIges()、exportStl()与exportStep()方法。因此，可以这..." current
• 02:4402:44, 20 July 2019 diff hist −19‎ Topological data scripting/zh-cn ‎ Created page with "== 加载与保存 == 在零件模块中有若干种保存工作进度的方式。您可以保存自己的FreeCAD文件，也可以将零件对象直接保存为常见的CAD..."
• 02:4402:44, 20 July 2019 diff hist +214‎ N Translations:Topological data scripting/102/zh-cn ‎ Created page with "== 加载与保存 == 在零件模块中有若干种保存工作进度的方式。您可以保存自己的FreeCAD文件，也可以将零件对象直接保存为常见的CAD..." current
• 02:4202:42, 20 July 2019 diff hist +20‎ Topological data scripting/zh-cn ‎ Created page with "构建的过程中，每次只构造一个面；当立方体创建完成后，再通过从中切割一个穿过它的圆柱体来实现穿孔。"
• 02:4202:42, 20 July 2019 diff hist +144‎ N Translations:Topological data scripting/101/zh-cn ‎ Created page with "构建的过程中，每次只构造一个面；当立方体创建完成后，再通过从中切割一个穿过它的圆柱体来实现穿孔。" current
• 02:3402:34, 20 July 2019 diff hist −10‎ Topological data scripting/zh-cn ‎ Created page with "==盒体穿孔== 此实例为构建一个穿孔的盒子。"
• 02:3402:34, 20 July 2019 diff hist +59‎ N Translations:Topological data scripting/100/zh-cn ‎ Created page with "==盒体穿孔== 此实例为构建一个穿孔的盒子。" current
• 02:0002:00, 20 July 2019 diff hist −2‎ Topological data scripting/zh-cn ‎ Created page with "最后，我们调用此函数来创建实际零件，并将其显示粗来。"
• 02:0002:00, 20 July 2019 diff hist +78‎ N Translations:Topological data scripting/99/zh-cn ‎ Created page with "最后，我们调用此函数来创建实际零件，并将其显示粗来。" current
• 01:5901:59, 20 July 2019 diff hist +9‎ Topological data scripting/zh-cn ‎ Created page with "随后，我们将Part零件实体作为函数的处理结果返回。"
• 01:5901:59, 20 July 2019 diff hist +70‎ N Translations:Topological data scripting/98/zh-cn ‎ Created page with "随后，我们将Part零件实体作为函数的处理结果返回。" current
• 01:5701:57, 20 July 2019 diff hist −8‎ Topological data scripting/zh-cn ‎ Created page with "融合（fuse）操作，在其他应用程序中有时也称并集，这是一种强大的工具。它负责小心地粘合需要粘合的部分，并去掉需要去掉的部..."
• 01:5701:57, 20 July 2019 diff hist +181‎ N Translations:Topological data scripting/97/zh-cn ‎ Created page with "融合（fuse）操作，在其他应用程序中有时也称并集，这是一种强大的工具。它负责小心地粘合需要粘合的部分，并去掉需要去掉的部..." current
• 01:5301:53, 20 July 2019 diff hist +41‎ Topological data scripting/zh-cn ‎ Created page with "此刻，瓶体大功告成，但是革命尚未成功，同志还需努力，我们还需创建一个瓶颈。因此我们利用一个圆柱体创建了新实体。"
• 01:5301:53, 20 July 2019 diff hist +165‎ N Translations:Topological data scripting/96/zh-cn ‎ Created page with "此刻，瓶体大功告成，但是革命尚未成功，同志还需努力，我们还需创建一个瓶颈。因此我们利用一个圆柱体创建了新实体。" current
• 01:5101:51, 20 July 2019 diff hist +58‎ Topological data scripting/zh-cn ‎ Created page with "现在，我们就得到了一条闭合连线，借助它即可构造出面。一旦有了面，我们就可以对它进行挤型。挤型过程中我们就创建了一个实..."
• 01:5101:51, 20 July 2019 diff hist +285‎ N Translations:Topological data scripting/95/zh-cn ‎ Created page with "现在，我们就得到了一条闭合连线，借助它即可构造出面。一旦有了面，我们就可以对它进行挤型。挤型过程中我们就创建了一个实..." current
• 01:4501:45, 20 July 2019 diff hist +51‎ Topological data scripting/zh-cn ‎ Created page with "到目前为止，我们仅构建了半个瓶子的轮廓。构建整个瓶子其实再次重复同样的流程即可，我们这里取巧对此前的半个轮廓进行镜像..."
• 01:4501:45, 20 July 2019 diff hist +669‎ N Translations:Topological data scripting/94/zh-cn ‎ Created page with "到目前为止，我们仅构建了半个瓶子的轮廓。构建整个瓶子其实再次重复同样的流程即可，我们这里取巧对此前的半个轮廓进行镜像..." current
• 01:1701:17, 20 July 2019 diff hist +30‎ Topological data scripting/zh-cn ‎ Created page with "还记得几何图元与拓扑形状的区别吗？在此，我们利用此前创建的结构几何对象来构建拓扑形状。首先构建三条边（边可以是直边或..."
• 01:1701:17, 20 July 2019 diff hist +225‎ N Translations:Topological data scripting/93/zh-cn ‎ Created page with "还记得几何图元与拓扑形状的区别吗？在此，我们利用此前创建的结构几何对象来构建拓扑形状。首先构建三条边（边可以是直边或..." current
• 01:1001:10, 20 July 2019 diff hist −9‎ Topological data scripting/zh-cn ‎ Created page with "以上代码分别：利用三个点构建了一条弧，依次利用两个点构建了两条线段。"
• 01:1001:10, 20 July 2019 diff hist +102‎ N Translations:Topological data scripting/92/zh-cn ‎ Created page with "以上代码分别：利用三个点构建了一条弧，依次利用两个点构建了两条线段。" current
• 01:0801:08, 20 July 2019 diff hist +3‎ Topological data scripting/zh-cn ‎ Created page with "我们在此定义了makeBottle函数。调用此函数时可不输入任何参数，就像我们在上面所做的那样，在这种情况下，函数采用的是默认的宽..."
• 01:0801:08, 20 July 2019 diff hist +271‎ N Translations:Topological data scripting/91/zh-cn ‎ Created page with "我们在此定义了makeBottle函数。调用此函数时可不输入任何参数，就像我们在上面所做的那样，在这种情况下，函数采用的是默认的宽..." current
• 01:0301:03, 20 July 2019 diff hist +3‎ Topological data scripting/zh-cn ‎ Created page with "在此示例中，我们不仅需要Part模块，还要用到FreeCAD.Base模块，后者包括了如向量与矩阵这样的FreeCAD基本结构。"
• 01:0301:03, 20 July 2019 diff hist +146‎ N Translations:Topological data scripting/90/zh-cn ‎ Created page with "在此示例中，我们不仅需要Part模块，还要用到FreeCAD.Base模块，后者包括了如向量与矩阵这样的FreeCAD基本结构。" current
• 01:0001:00, 20 July 2019 diff hist −8‎ Topological data scripting/zh-cn ‎ Created page with "=== 详细说明 ==="
• 01:0001:00, 20 July 2019 diff hist +20‎ N Translations:Topological data scripting/89/zh-cn ‎ Created page with "=== 详细说明 ===" current
• 01:0001:00, 20 July 2019 diff hist +9‎ Topological data scripting/zh-cn ‎ Created page with "=== 瓶子示例完整脚本 === 以下为MakeBottle的完整脚本代码："
• 01:0001:00, 20 July 2019 diff hist +76‎ N Translations:Topological data scripting/88/zh-cn ‎ Created page with "=== 瓶子示例完整脚本 === 以下为MakeBottle的完整脚本代码：" current
• 00:5900:59, 20 July 2019 diff hist +21‎ Topological data scripting/zh-cn ‎ Created page with "== 完整的示例：OCC瓶子 == 我们可以在[http://www.opencascade.com/doc/occt-6.9.0/overview/html/occt__tutorial.html#sec1 OpenCasCade技术教程]找到一个典型..."
• 00:5900:59, 20 July 2019 diff hist +574‎ N Translations:Topological data scripting/87/zh-cn ‎ Created page with "== 完整的示例：OCC瓶子 == 我们可以在[http://www.opencascade.com/doc/occt-6.9.0/overview/html/occt__tutorial.html#sec1 OpenCasCade技术教程]找到一个典型..." current
• 00:4800:48, 20 July 2019 diff hist −3‎ Topological data scripting/zh-cn ‎ Created page with "利用以下脚本来统计选中对象的边长总和："
• 00:4800:48, 20 July 2019 diff hist +57‎ N Translations:Topological data scripting/86/zh-cn ‎ Created page with "利用以下脚本来统计选中对象的边长总和：" current
• 00:4700:47, 20 July 2019 diff hist +6‎ Topological data scripting/zh-cn ‎ Created page with "现在来选中其中的一些面和边。利用下列脚本，您可以遍历所有被选中的对象及其子元素："
• 00:4700:47, 20 July 2019 diff hist +120‎ N Translations:Topological data scripting/85/zh-cn ‎ Created page with "现在来选中其中的一些面和边。利用下列脚本，您可以遍历所有被选中的对象及其子元素：" current
• 00:4700:47, 20 July 2019 diff hist 0‎ Topological data scripting/zh-cn ‎No edit summary
• 00:4700:47, 20 July 2019 diff hist 0‎ Translations:Topological data scripting/84/zh-cn ‎No edit summary current
• 00:4500:45, 20 July 2019 diff hist +12‎ Topological data scripting/zh-cn ‎ Created page with "=== 使用选择的对象 === 在此，我们来看看如何使用在视图中选择的对象。我们先来创建一个立方体，并令它在视图中显示出来。"
• 00:4500:45, 20 July 2019 diff hist +168‎ N Translations:Topological data scripting/84/zh-cn ‎ Created page with "=== 使用选择的对象 === 在此，我们来看看如何使用在视图中选择的对象。我们先来创建一个立方体，并令它在视图中显示出来。"
• 00:4000:40, 20 July 2019 diff hist −9‎ Topological data scripting/zh-cn ‎ Created page with "您现在可以将长度作为位置，借此来访问对应边的大量属性。这意味着，如果边长为100mm，则起始位置为0，而终点位置为100。"
• 00:4000:40, 20 July 2019 diff hist +165‎ N Translations:Topological data scripting/83/zh-cn ‎ Created page with "您现在可以将长度作为位置，借此来访问对应边的大量属性。这意味着，如果边长为100mm，则起始位置为0，而终点位置为100。" current
• 00:3600:36, 20 July 2019 diff hist +29‎ Topological data scripting/zh-cn ‎ Created page with "=== 边的分析 === 对于以一条任意曲线作为边的情况而言，想必大多用户都希望对它进行离散化处理。在FreeCAD中是通过边的长度来对其..."
• 00:3600:36, 20 July 2019 diff hist +260‎ N Translations:Topological data scripting/82/zh-cn ‎ Created page with "=== 边的分析 === 对于以一条任意曲线作为边的情况而言，想必大多用户都希望对它进行离散化处理。在FreeCAD中是通过边的长度来对其..." current

19 July 2019

• 16:4916:49, 19 July 2019 diff hist +20‎ Topological data scripting/zh-cn ‎ Created page with "通过在python解释器中输入以上代码，您将得到一个易于理解的零件对象结构。其中使用makeBox()命令创建了一个实体形状。此实体就像..."
• 16:4916:49, 19 July 2019 diff hist +552‎ N Translations:Topological data scripting/81/zh-cn ‎ Created page with "通过在python解释器中输入以上代码，您将得到一个易于理解的零件对象结构。其中使用makeBox()命令创建了一个实体形状。此实体就像..." current
• 16:3816:38, 19 July 2019 diff hist −13‎ Topological data scripting/zh-cn ‎ Created page with "== 考察形状 == 您可以方便地考察拓扑数据结构："
• 16:3816:38, 19 July 2019 diff hist +64‎ N Translations:Topological data scripting/80/zh-cn ‎ Created page with "== 考察形状 == 您可以方便地考察拓扑数据结构：" current
• 16:3516:35, 19 July 2019 diff hist −4‎ Topological data scripting/zh-cn ‎ Created page with "如果采用的是空心圆形，将得到一个空心管。如果使用的是具有填充面的圆盘，则将得到一个实心圆柱体："
• 16:3516:35, 19 July 2019 diff hist +141‎ N Translations:Topological data scripting/79/zh-cn ‎ Created page with "如果采用的是空心圆形，将得到一个空心管。如果使用的是具有填充面的圆盘，则将得到一个实心圆柱体：" current
• 16:3016:30, 19 July 2019 diff hist +16‎ Topological data scripting/zh-cn ‎ Created page with "==== 挤型 ==== 挤型（extrusion）是将一个平面几何形状以特定的方向“推进”从而构建对应实体的动作。试想，将一个圆形“推挤”为..."
• 16:3016:30, 19 July 2019 diff hist +188‎ N Translations:Topological data scripting/78/zh-cn ‎ Created page with "==== 挤型 ==== 挤型（extrusion）是将一个平面几何形状以特定的方向“推进”从而构建对应实体的动作。试想，将一个圆形“推挤”为..." current
• 16:2216:22, 19 July 2019 diff hist −6‎ Topological data scripting/zh-cn ‎ Created page with "==== 截面 ==== 截面（section）是实体与平面的交集。它将返回一个交集曲线，一个由多条边复合而成的复合曲线。（？）"
• 16:2216:22, 19 July 2019 diff hist +156‎ N Translations:Topological data scripting/77/zh-cn ‎ Created page with "==== 截面 ==== 截面（section）是实体与平面的交集。它将返回一个交集曲线，一个由多条边复合而成的复合曲线。（？）" current
• 15:2815:28, 19 July 2019 diff hist −10‎ Part Torus/zh-cn ‎ Created page with "File:TorusExampleAngle3.jpg {{clear}} 将Angle3参数指定为90°。"
• 15:2815:28, 19 July 2019 diff hist +73‎ N Translations:Part Torus/15/zh-cn ‎ Created page with "File:TorusExampleAngle3.jpg {{clear}} 将Angle3参数指定为90°。" current
• 15:2715:27, 19 July 2019 diff hist +2‎ Part Torus/zh-cn ‎ Created page with "File:TorusExampleAngle2.jpg <br/> 将Angle2参数的值指定为90°。"
• 15:2715:27, 19 July 2019 diff hist +75‎ N Translations:Part Torus/14/zh-cn ‎ Created page with "File:TorusExampleAngle2.jpg <br/> 将Angle2参数的值指定为90°。" current
• 15:2715:27, 19 July 2019 diff hist +13‎ Part Torus/zh-cn ‎ Created page with "File:TorusExampleAngle1.jpg <br/> 将Angle1参数的值指定为-90°。不难发现，"角度测量"工具并不能显示负值角度。因此，请将图中所示的值..."
• 15:2715:27, 19 July 2019 diff hist +210‎ N Translations:Part Torus/13/zh-cn ‎ Created page with "File:TorusExampleAngle1.jpg <br/> 将Angle1参数的值指定为-90°。不难发现，"角度测量"工具并不能显示负值角度。因此，请将图中所示的值..." current
• 15:2515:25, 19 July 2019 diff hist +6‎ Part Torus/zh-cn ‎No edit summary
• 15:2515:25, 19 July 2019 diff hist +6‎ Translations:Part Torus/12/zh-cn ‎No edit summary current
• 15:2415:24, 19 July 2019 diff hist +5‎ Part Torus/zh-cn ‎No edit summary
• 15:2415:24, 19 July 2019 diff hist +5‎ Translations:Part Torus/11/zh-cn ‎No edit summary current
• 15:2415:24, 19 July 2019 diff hist −4‎ Part Torus/zh-cn ‎ Created page with "File:TorusExampleRadius2.jpg 将Radius2参数的值指定为2 mm。"
• 15:2415:24, 19 July 2019 diff hist +71‎ N Translations:Part Torus/12/zh-cn ‎ Created page with "File:TorusExampleRadius2.jpg 将Radius2参数的值指定为2 mm。"
• 15:2315:23, 19 July 2019 diff hist +6‎ Part Torus/zh-cn ‎No edit summary
• 15:2315:23, 19 July 2019 diff hist +6‎ Translations:Part Torus/11/zh-cn ‎No edit summary
• 15:2315:23, 19 July 2019 diff hist −10‎ Part Torus/zh-cn ‎ Created page with "File:TorusExampleRadius1.jpg 将Radius1的值指定为20 mm。"
• 15:2315:23, 19 July 2019 diff hist +66‎ N Translations:Part Torus/11/zh-cn ‎ Created page with "File:TorusExampleRadius1.jpg 将Radius1的值指定为20 mm。"
• 15:2215:22, 19 July 2019 diff hist −40‎ Part Torus/zh-cn ‎ Created page with "以及一系列标准定位参数。下图以可视化方式展示了上述提及的诸参数："
• 15:2215:22, 19 July 2019 diff hist +96‎ N Translations:Part Torus/10/zh-cn ‎ Created page with "以及一系列标准定位参数。下图以可视化方式展示了上述提及的诸参数：" current
• 15:2015:20, 19 July 2019 diff hist −1‎ Part Torus/zh-cn ‎ Created page with "* {{Parameter|Radius1:}} 小圆盘圆周运动所绕圆环的半径 * {{Parameter|Radius2:}} 定义环面形状的小圆盘的半径 * {{Parameter|Angle1:}} 用于切割/定..."
• 15:2015:20, 19 July 2019 diff hist +371‎ N Translations:Part Torus/9/zh-cn ‎ Created page with "* {{Parameter|Radius1:}} 小圆盘圆周运动所绕圆环的半径 * {{Parameter|Radius2:}} 定义环面形状的小圆盘的半径 * {{Parameter|Angle1:}} 用于切割/定..." current
• 14:3614:36, 19 July 2019 diff hist +10‎ Part Torus/zh-cn ‎ Created page with "创建环面的过程就相当于令一个小圆盘沿一个幻想的环形轨道为轴进行圆周运动。这样，就可以通过下列参数来定义参数化环面："
• 14:3614:36, 19 July 2019 diff hist +171‎ N Translations:Part Torus/8/zh-cn ‎ Created page with "创建环面的过程就相当于令一个小圆盘沿一个幻想的环形轨道为轴进行圆周运动。这样，就可以通过下列参数来定义参数化环面：" current
• 14:0414:04, 19 July 2019 diff hist +44‎ Part Module/zh-cn ‎ Created page with "这样一来，利用区区几种形状您就可以构建出灰常复杂的零件。反之，您亦可以从一个更加复杂的形状中提取出构成它的所有子形状。"
• 14:0414:04, 19 July 2019 diff hist +177‎ N Translations:Part Module/17/zh-cn ‎ Created page with "这样一来，利用区区几种形状您就可以构建出灰常复杂的零件。反之，您亦可以从一个更加复杂的形状中提取出构成它的所有子形状。" current
• 14:0214:02, 19 July 2019 diff hist 0‎ Part Module/zh-cn ‎ Created page with "当然，您也可以将一条边或一个面还原为其对应的几何图元。"
• 14:0214:02, 19 July 2019 diff hist +81‎ N Translations:Part Module/16/zh-cn ‎ Created page with "当然，您也可以将一条边或一个面还原为其对应的几何图元。" current
• 13:5913:59, 19 July 2019 diff hist +28‎ Part Module/zh-cn ‎ Created page with "几何类型实际可分为两大关键组群：曲线（curve）与表面（surface）。您可利用曲线（线、圆……）来直接构建一个边，而采用表面（..."
• 13:5913:59, 19 July 2019 diff hist +509‎ N Translations:Part Module/15/zh-cn ‎ Created page with "几何类型实际可分为两大关键组群：曲线（curve）与表面（surface）。您可利用曲线（线、圆……）来直接构建一个边，而采用表面（..." current
• 13:3213:32, 19 July 2019 diff hist −37‎ Part Module/zh-cn ‎ Created page with "至于全部图元与形状的完整列表可参考 [http://www.opencascade.org/org/doc/ OCC文档] (或者： [http://opencascade.sourcearchive.com/documentation/6.3.0.dfsg.1..."
• 13:3213:32, 19 July 2019 diff hist +566‎ N Translations:Part Module/14/zh-cn ‎ Created page with "至于全部图元与形状的完整列表可参考 [http://www.opencascade.org/org/doc/ OCC文档] (或者： [http://opencascade.sourcearchive.com/documentation/6.3.0.dfsg.1..." current
• 13:2513:25, 19 July 2019 diff hist +7‎ Part Module/zh-cn ‎ Created page with "总而言之，几何图元都是“无形状”的基本构成单位，而拓扑形状则是基于前者所构建的实体对象。"
• 13:2513:25, 19 July 2019 diff hist +132‎ N Translations:Part Module/13/zh-cn ‎ Created page with "总而言之，几何图元都是“无形状”的基本构成单位，而拓扑形状则是基于前者所构建的实体对象。" current
• 13:2313:23, 19 July 2019 diff hist +20‎ Part Module/zh-cn ‎ Created page with "在OpenCascade术语中，我们会在几何图元（geometric primitive）与拓扑形状（topological shape）之间进行区分。一个几何图元可以是点、线、..."
• 13:2313:23, 19 July 2019 diff hist +560‎ N Translations:Part Module/12/zh-cn ‎ Created page with "在OpenCascade术语中，我们会在几何图元（geometric primitive）与拓扑形状（topological shape）之间进行区分。一个几何图元可以是点、线、..." current
• 13:1413:14, 19 July 2019 diff hist −1‎ Part Module/zh-cn ‎ Created page with "== OCCT中的几何概念 =="
• 13:1413:14, 19 July 2019 diff hist +28‎ N Translations:Part Module/11/zh-cn ‎ Created page with "== OCCT中的几何概念 ==" current
• 13:1113:11, 19 July 2019 diff hist +22‎ Topological data scripting/zh-cn ‎ Created page with "==== 并集 ==== 并集操作被称为“融合（fuse）”，可以实现如下："
• 13:1113:11, 19 July 2019 diff hist +84‎ N Translations:Topological data scripting/76/zh-cn ‎ Created page with "==== 并集 ==== 并集操作被称为“融合（fuse）”，可以实现如下：" current
• 13:1013:10, 19 July 2019 diff hist +6‎ Topological data scripting/zh-cn ‎ Created page with "==== 交集 ==== 类似地，两个图形之间的交集被称之为“共有（common）”，可以这样来实现："
• 13:1013:10, 19 July 2019 diff hist +119‎ N Translations:Topological data scripting/75/zh-cn ‎ Created page with "==== 交集 ==== 类似地，两个图形之间的交集被称之为“共有（common）”，可以这样来实现：" current
• 13:0813:08, 19 July 2019 diff hist +23‎ Topological data scripting/zh-cn ‎ Created page with "==== 差集 ==== 从一个图形中去掉另一个图形在OCC/FreeCAD的术语中被称之为“切割（cut）”，可以这样来实现："
• 13:0813:08, 19 July 2019 diff hist +142‎ N Translations:Topological data scripting/74/zh-cn ‎ Created page with "==== 差集 ==== 从一个图形中去掉另一个图形在OCC/FreeCAD的术语中被称之为“切割（cut）”，可以这样来实现：" current
• 13:0213:02, 19 July 2019 diff hist +21‎ Online Help Toc/zh-cn ‎No edit summary
• 13:0213:02, 19 July 2019 diff hist +61‎ Translations:Online Help Toc/10/zh-cn ‎No edit summary
• 12:5812:58, 19 July 2019 diff hist −6‎ Topological data scripting/zh-cn ‎ Created page with "=== 布尔运算 ==="
• 12:5812:58, 19 July 2019 diff hist +20‎ N Translations:Topological data scripting/73/zh-cn ‎ Created page with "=== 布尔运算 ===" current
• 12:5812:58, 19 July 2019 diff hist +19‎ Topological data scripting/zh-cn ‎ Created page with "==== 对几何形状进行缩放 ==== 对一个几何形状进行缩放是一种更为危险的操作，因为这并不像平移或旋转那样，（以不同的x、y与z值..."
• 12:5812:58, 19 July 2019 diff hist +473‎ N Translations:Topological data scripting/72/zh-cn ‎ Created page with "==== 对几何形状进行缩放 ==== 对一个几何形状进行缩放是一种更为危险的操作，因为这并不像平移或旋转那样，（以不同的x、y与z值..." current
• 12:4812:48, 19 July 2019 diff hist +58‎ Part Builder/zh-cn ‎No edit summary
• 12:4812:48, 19 July 2019 diff hist +58‎ Translations:Part Builder/3/zh-cn ‎No edit summary
• 12:2212:22, 19 July 2019 diff hist −9‎ Part Builder/zh-cn ‎ Created page with "==描述== 一种利用各种参数化几何图元来创建更为复杂形状的工具。"
• 12:2212:22, 19 July 2019 diff hist +89‎ N Translations:Part Builder/2/zh-cn ‎ Created page with "==描述== 一种利用各种参数化几何图元来创建更为复杂形状的工具。"

14 July 2019

• 10:2410:24, 14 July 2019 diff hist +42‎ Part Builder/zh-cn ‎ Created page with "==用法== 本工具可以令您通过下列选项来创建几何形状 #由两个顶点构成的边 #由多个顶点构成的面 ##在3D视图里选中围成面的多个顶..."
• 10:2410:24, 14 July 2019 diff hist +1,042‎ N Translations:Part Builder/3/zh-cn ‎ Created page with "==用法== 本工具可以令您通过下列选项来创建几何形状 #由两个顶点构成的边 #由多个顶点构成的面 ##在3D视图里选中围成面的多个顶..."
• 09:4609:46, 14 July 2019 diff hist +158‎ Part Builder/zh-cn ‎ Created page with "==备注== 一种可能采用的工作流： *利用底图工作台中的工具（例如线条或连线）来绘制一个目标形状的线框模型。 *利用（形状构建..."
• 09:4609:46, 14 July 2019 diff hist +402‎ N Translations:Part Builder/5/zh-cn ‎ Created page with "==备注== 一种可能采用的工作流： *利用底图工作台中的工具（例如线条或连线）来绘制一个目标形状的线框模型。 *利用（形状构建..."
• 09:3609:36, 14 July 2019 diff hist −5‎ Part Builder/zh-cn ‎ Created page with "==限制== <br />"
• 09:3609:36, 14 July 2019 diff hist +17‎ N Translations:Part Builder/4/zh-cn ‎ Created page with "==限制== <br />"
• 09:3409:34, 14 July 2019 diff hist +1,968‎ N Part Builder/zh-cn ‎ Created page with "零件形状构建工具"
• 09:3409:34, 14 July 2019 diff hist +24‎ N Translations:Part Builder/Page display title/zh-cn ‎ Created page with "零件形状构建工具"
• 09:1409:14, 14 July 2019 diff hist +42‎ Glossary/zh-cn ‎ Created page with "==U== {{gloss}} {{term|并集（Union）}} {{defn|defn=一种在所选形状上执行特定布尔运算的零件#Workbench|工作..."
• 09:1409:14, 14 July 2019 diff hist +616‎ N Translations:Glossary/23/zh-cn ‎ Created page with "==U== {{gloss}} {{term|并集（Union）}} {{defn|defn=一种在所选形状上执行特定布尔运算的零件#Workbench|工作..."
• 09:0209:02, 14 July 2019 diff hist +4‎ Glossary/zh-cn ‎No edit summary
• 09:0209:02, 14 July 2019 diff hist +4‎ Translations:Glossary/2/zh-cn ‎No edit summary
• 08:4008:40, 14 July 2019 diff hist +4‎ Topological data scripting/zh-cn ‎ Created page with "或者"
• 08:4008:40, 14 July 2019 diff hist +6‎ N Translations:Topological data scripting/71/zh-cn ‎ Created page with "或者" current
• 08:4008:40, 14 July 2019 diff hist +73‎ Topological data scripting/zh-cn ‎ Created page with "一旦设置好矩阵中的值，我们就可以将其应用至待变换的几何形状。FreeCAD为此提供了两种方法：transformShape()与transformGeometry()。两者..."
• 08:4008:40, 14 July 2019 diff hist +375‎ N Translations:Topological data scripting/70/zh-cn ‎ Created page with "一旦设置好矩阵中的值，我们就可以将其应用至待变换的几何形状。FreeCAD为此提供了两种方法：transformShape()与transformGeometry()。两者..." current
• 08:3308:33, 14 July 2019 diff hist +39‎ Topological data scripting/zh-cn ‎ Created page with "请注意：FreeCAD中的矩阵采用的是弧度制。另外，基本所有的矩阵操作都会借助一个向量，也可以直接取三个对应的数值，因此以下两..."
• 08:3308:33, 14 July 2019 diff hist +199‎ N Translations:Topological data scripting/69/zh-cn ‎ Created page with "请注意：FreeCAD中的矩阵采用的是弧度制。另外，基本所有的矩阵操作都会借助一个向量，也可以直接取三个对应的数值，因此以下两..." current
• 08:2708:27, 14 July 2019 diff hist −17‎ Topological data scripting/zh-cn ‎ Created page with "==== 利用矩阵进行通用变换 ==== 矩阵是存储3D空间中各种变换的一种简便方式。您可以在单个矩阵中设置平移、旋转以及缩放的相关数..."
• 08:2708:27, 14 July 2019 diff hist +220‎ N Translations:Topological data scripting/68/zh-cn ‎ Created page with "==== 利用矩阵进行通用变换 ==== 矩阵是存储3D空间中各种变换的一种简便方式。您可以在单个矩阵中设置平移、旋转以及缩放的相关数..." current
• 08:2108:21, 14 July 2019 diff hist −18‎ Topological data scripting/zh-cn ‎ Created page with "上述代码将目标形状沿Z轴旋转180度。"
• 08:2108:21, 14 July 2019 diff hist +49‎ N Translations:Topological data scripting/67/zh-cn ‎ Created page with "上述代码将目标形状沿Z轴旋转180度。" current
• 08:2008:20, 14 July 2019 diff hist +7‎ Topological data scripting/zh-cn ‎ Created page with "==== 旋转一个几何形状 ==== 为了旋转一个几何形状，您需要指定旋转中心、旋转轴以及旋转角度："
• 08:2008:20, 14 July 2019 diff hist +128‎ N Translations:Topological data scripting/66/zh-cn ‎ Created page with "==== 旋转一个几何形状 ==== 为了旋转一个几何形状，您需要指定旋转中心、旋转轴以及旋转角度：" current
• 08:1808:18, 14 July 2019 diff hist +9‎ Topological data scripting/zh-cn ‎ Created page with "上述代码将几何形状"myShape"在x轴方向上移动2个单位。"
• 08:1808:18, 14 July 2019 diff hist +71‎ N Translations:Topological data scripting/65/zh-cn ‎ Created page with "上述代码将几何形状"myShape"在x轴方向上移动2个单位。" current
• 08:1708:17, 14 July 2019 diff hist +47‎ Topological data scripting/zh-cn ‎ Created page with "==== 平移一个几何形状 ==== 平移也就是将一个几何图形在不同的位置之间进行移动。 任意形状（边、面、立方体等等……）都可以通..."
• 08:1708:17, 14 July 2019 diff hist +214‎ N Translations:Topological data scripting/64/zh-cn ‎ Created page with "==== 平移一个几何形状 ==== 平移也就是将一个几何图形在不同的位置之间进行移动。 任意形状（边、面、立方体等等……）都可以通..." current
• 08:1408:14, 14 July 2019 diff hist −8‎ Topological data scripting/zh-cn ‎ Created page with "=== 变换操作 ==="
• 08:1408:14, 14 July 2019 diff hist +20‎ N Translations:Topological data scripting/63/zh-cn ‎ Created page with "=== 变换操作 ===" current
• 08:1408:14, 14 July 2019 diff hist +1‎ Topological data scripting/zh-cn ‎ Created page with "== 修改几何形状 == FreeCAD提供了若干方法来修改几何形状。其中一些是简单的变换操作，如移动或旋转几何形状，而其他的更为复杂..."
• 08:1408:14, 14 July 2019 diff hist +224‎ N Translations:Topological data scripting/62/zh-cn ‎ Created page with "== 修改几何形状 == FreeCAD提供了若干方法来修改几何形状。其中一些是简单的变换操作，如移动或旋转几何形状，而其他的更为复杂..." current
• 08:0808:08, 14 July 2019 diff hist +50‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个圆锥体 ==== 利用'''makeCone(radius1,radius2,height,[pnt,dir,angle])'''函数可创建一个圆锥体。其可选项默认值为 pnt=Vector(0,0,0), dir=Ve..."
• 08:0808:08, 14 July 2019 diff hist +201‎ N Translations:Topological data scripting/61/zh-cn ‎ Created page with "==== 创建一个圆锥体 ==== 利用'''makeCone(radius1,radius2,height,[pnt,dir,angle])'''函数可创建一个圆锥体。其可选项默认值为 pnt=Vector(0,0,0), dir=Ve..." current
• 08:0708:07, 14 July 2019 diff hist +45‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个圆柱体 ==== 通过'''makeCylinder(radius,height,[pnt,dir,angle])'''可创建一个圆柱体。可选项的默认值为pnt=Vector(0,0,0)，dir=Vector(0,0,1)..."
• 08:0708:07, 14 July 2019 diff hist +194‎ N Translations:Topological data scripting/60/zh-cn ‎ Created page with "==== 创建一个圆柱体 ==== 通过'''makeCylinder(radius,height,[pnt,dir,angle])'''可创建一个圆柱体。可选项的默认值为pnt=Vector(0,0,0)，dir=Vector(0,0,1)..." current
• 08:0608:06, 14 July 2019 diff hist +71‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个球体 ==== 利用'''makeSphere(radius,[pnt, dir, angle1,angle2,angle3])'''函数可创建一个球体。其可选项默认值为pnt=Vector(0,0,0), dir=Vector..."
• 08:0608:06, 14 July 2019 diff hist +354‎ N Translations:Topological data scripting/59/zh-cn ‎ Created page with "==== 创建一个球体 ==== 利用'''makeSphere(radius,[pnt, dir, angle1,angle2,angle3])'''函数可创建一个球体。其可选项默认值为pnt=Vector(0,0,0), dir=Vector..." current
• 07:4607:46, 14 July 2019 diff hist +58‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个立方体或长方体 ==== 通过'''makeBox(length,width,height,[pnt,dir])'''可创建一个立方体或长方体。其可选项默认值为pnt=Vector(0,0,0)..."
• 07:4607:46, 14 July 2019 diff hist +197‎ N Translations:Topological data scripting/58/zh-cn ‎ Created page with "==== 创建一个立方体或长方体 ==== 通过'''makeBox(length,width,height,[pnt,dir])'''可创建一个立方体或长方体。其可选项默认值为pnt=Vector(0,0,0)..." current
• 07:4507:45, 14 July 2019 diff hist +21‎ Topological data scripting/zh-cn ‎ Created page with "上述代码将创建半个环面；只有最后一个参数发生了改变。 即除了最后的angle，其余角度皆为默认值。将angle指定为180，将创建大环0..."
• 07:4507:45, 14 July 2019 diff hist +228‎ N Translations:Topological data scripting/57/zh-cn ‎ Created page with "上述代码将创建半个环面；只有最后一个参数发生了改变。 即除了最后的angle，其余角度皆为默认值。将angle指定为180，将创建大环0..." current
• 07:3607:36, 14 July 2019 diff hist −3‎ Topological data scripting/zh-cn ‎ Created page with "以上代码将场景一个环面的切片。"
• 07:3607:36, 14 July 2019 diff hist +45‎ N Translations:Topological data scripting/56/zh-cn ‎ Created page with "以上代码将场景一个环面的切片。" current
• 07:3207:32, 14 July 2019 diff hist −1‎ Topological data scripting/zh-cn ‎ Created page with "以上代码将场景一个直径为20（半径为10）且厚度为4（小圆半径为2）的环面。"
• 07:3207:32, 14 July 2019 diff hist +102‎ N Translations:Topological data scripting/55/zh-cn ‎ Created page with "以上代码将场景一个直径为20（半径为10）且厚度为4（小圆半径为2）的环面。" current
• 02:5702:57, 14 July 2019 diff hist +1‎ Draft Arc/zh-cn ‎ Created page with "示例："
• 02:5702:57, 14 July 2019 diff hist +9‎ N Translations:Draft Arc/16/zh-cn ‎ Created page with "示例：" current
• 02:5702:57, 14 July 2019 diff hist −3‎ Draft Arc/zh-cn ‎ Created page with "==脚本== {{Emphasis|参见:}} Draft API 与 FreeCAD Scripting Basics。"
• 02:5702:57, 14 July 2019 diff hist +81‎ N Translations:Draft Arc/7/zh-cn ‎ Created page with "==脚本== {{Emphasis|参见:}} Draft API 与 FreeCAD Scripting Basics。"
• 02:2502:25, 14 July 2019 diff hist −96‎ Draft Arc/zh-cn ‎ Created page with "==选项== * 绘弧工具的主要用法就是通过拾取四个点：中点、一个圆周上的点，弧的起始及其终点。 ** 通过按{{KEY|Alt}}键，您能以一条..."
• 02:2502:25, 14 July 2019 diff hist +1,410‎ N Translations:Draft Arc/5/zh-cn ‎ Created page with "==选项== * 绘弧工具的主要用法就是通过拾取四个点：中点、一个圆周上的点，弧的起始及其终点。 ** 通过按{{KEY|Alt}}键，您能以一条..."
• 01:4201:42, 14 July 2019 diff hist −13‎ Draft Arc/zh-cn ‎ Created page with "==属性== 弧对象享有Draft Circle中的所有属性，但是有些属性仅对圆形而言才有意义。"
• 01:4201:42, 14 July 2019 diff hist +114‎ N Translations:Draft Arc/6/zh-cn ‎ Created page with "==属性== 弧对象享有Draft Circle中的所有属性，但是有些属性仅对圆形而言才有意义。"
• 01:4201:42, 14 July 2019 diff hist +36‎ Draft Arc/zh-cn ‎ Created page with "创建弧之后，通过将其第一角度（first angle）与最后角度（last angle）两个属性设置为相同值，便可以将它转换为一个圆。"
• 01:4201:42, 14 July 2019 diff hist +159‎ N Translations:Draft Arc/12/zh-cn ‎ Created page with "创建弧之后，通过将其第一角度（first angle）与最后角度（last angle）两个属性设置为相同值，便可以将它转换为一个圆。" current
• 01:4001:40, 14 July 2019 diff hist −5‎ Draft Arc/zh-cn ‎ Created page with "通过双击树状视图（tree view）中的元素或点击{{Button|16px Draft Edit}}按钮即可编辑对应弧。届时，您就可将中心点..."
• 01:4001:40, 14 July 2019 diff hist +205‎ N Translations:Draft Arc/11/zh-cn ‎ Created page with "通过双击树状视图（tree view）中的元素或点击{{Button|16px Draft Edit}}按钮即可编辑对应弧。届时，您就可将中心点..."
• 01:3801:38, 14 July 2019 diff hist −4‎ Draft Arc/zh-cn ‎ Created page with "==如何使用== # 按下{{Button|16px Draft Arc}}按钮，或先按{{KEY|A}}键再按{{KEY|R}}键。 # 在3D视图中点击第一个点，或输..."
• 01:3801:38, 14 July 2019 diff hist +494‎ N Translations:Draft Arc/4/zh-cn ‎ Created page with "==如何使用== # 按下{{Button|16px Draft Arc}}按钮，或先按{{KEY|A}}键再按{{KEY|R}}键。 # 在3D视图中点击第一个点，或输..."
• 01:3101:31, 14 July 2019 diff hist +9‎ Topological data scripting/zh-cn ‎No edit summary
• 01:3101:31, 14 July 2019 diff hist +9‎ Translations:Topological data scripting/54/zh-cn ‎No edit summary current
• 01:2801:28, 14 July 2019 diff hist −2‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个环面 ==== 利用'''makeTorus(radius1,radius2,[pnt,dir,angle1,angle2,angle])'''来创建环面。 其默认值为：pnt=Vector(0,0,0), dir=Vector(0,0,1), ang..."
• 01:2801:28, 14 July 2019 diff hist +515‎ N Translations:Topological data scripting/54/zh-cn ‎ Created page with "==== 创建一个环面 ==== 利用'''makeTorus(radius1,radius2,[pnt,dir,angle1,angle2,angle])'''来创建环面。 其默认值为：pnt=Vector(0,0,0), dir=Vector(0,0,1), ang..."
• 01:1801:18, 14 July 2019 diff hist +22‎ Topological data scripting/zh-cn ‎ Created page with "针对上述Ellipse函数的构造函数，我们为之传入了中心位置，MajorRadius与MinorRadius。"
• 01:1801:18, 14 July 2019 diff hist +107‎ N Translations:Topological data scripting/53/zh-cn ‎ Created page with "针对上述Ellipse函数的构造函数，我们为之传入了中心位置，MajorRadius与MinorRadius。" current
• 01:1601:16, 14 July 2019 diff hist +10‎ Topological data scripting/zh-cn ‎ Created page with "请注意：Arc仅接收Base.Vector()作为其输入点，而非元组。"
• 01:1601:16, 14 July 2019 diff hist +73‎ N Translations:Topological data scripting/52/zh-cn ‎ Created page with "请注意：Arc仅接收Base.Vector()作为其输入点，而非元组。" current
• 01:1501:15, 14 July 2019 diff hist +31‎ Topological data scripting/zh-cn ‎ Created page with "在上面的代码中，我们分别传入了S1、S2与中心位置。与Arc函数类似，Ellipse函数创建了一个椭圆对象而非边，所以我们需要用toShape()..."
• 01:1501:15, 14 July 2019 diff hist +215‎ N Translations:Topological data scripting/51/zh-cn ‎ Created page with "在上面的代码中，我们分别传入了S1、S2与中心位置。与Arc函数类似，Ellipse函数创建了一个椭圆对象而非边，所以我们需要用toShape()..." current
• 01:1001:10, 14 July 2019 diff hist −1‎ Topological data scripting/zh-cn ‎No edit summary
• 01:1001:10, 14 July 2019 diff hist −1‎ Translations:Topological data scripting/38/zh-cn ‎No edit summary current
• 01:0901:09, 14 July 2019 diff hist −21‎ Topological data scripting/zh-cn ‎ Created page with "以长半轴MajorRadius与短半轴MinorRadius创建一个椭圆，其所在平面由Center与法线(0,0,1)定义。"
• 01:0901:09, 14 July 2019 diff hist +116‎ N Translations:Topological data scripting/50/zh-cn ‎ Created page with "以长半轴MajorRadius与短半轴MinorRadius创建一个椭圆，其所在平面由Center与法线(0,0,1)定义。" current
• 01:0601:06, 14 July 2019 diff hist −87‎ Topological data scripting/zh-cn ‎ Created page with "创建一个以点Center为中心的椭圆，所在平面由Center、S1与S2定义，长轴由Center与S1定义，长半轴为Center与S1间的距离，而短半轴则是S2与..."
• 01:0601:06, 14 July 2019 diff hist +196‎ N Translations:Topological data scripting/49/zh-cn ‎ Created page with "创建一个以点Center为中心的椭圆，所在平面由Center、S1与S2定义，长轴由Center与S1定义，长半轴为Center与S1间的距离，而短半轴则是S2与..." current
• 00:5600:56, 14 July 2019 diff hist 0‎ Topological data scripting/zh-cn ‎ Created page with "创建一个指定椭圆的副本。"
• 00:5600:56, 14 July 2019 diff hist +36‎ N Translations:Topological data scripting/48/zh-cn ‎ Created page with "创建一个指定椭圆的副本。" current
• 00:5400:54, 14 July 2019 diff hist −4‎ Topological data scripting/zh-cn ‎ Created page with "创建一个长半轴为2、短半轴为1，且中点位于(0,0,0)处的椭圆。"
• 00:5400:54, 14 July 2019 diff hist +81‎ N Translations:Topological data scripting/47/zh-cn ‎ Created page with "创建一个长半轴为2、短半轴为1，且中点位于(0,0,0)处的椭圆。" current
• 00:5000:50, 14 July 2019 diff hist −9‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个椭圆 ==== 有多种方法可以创建椭圆："
• 00:5000:50, 14 July 2019 diff hist +65‎ N Translations:Topological data scripting/46/zh-cn ‎ Created page with "==== 创建一个椭圆 ==== 有多种方法可以创建椭圆：" current
• 00:4900:49, 14 July 2019 diff hist +23‎ Topological data scripting/zh-cn ‎ Created page with "请注意，makePlane仅接收Base.Vector()作为其start_pnt与dir_normal参数，而非元组（tuples）。"
• 00:4900:49, 14 July 2019 diff hist +110‎ N Translations:Topological data scripting/45/zh-cn ‎ Created page with "请注意，makePlane仅接收Base.Vector()作为其start_pnt与dir_normal参数，而非元组（tuples）。" current
• 00:4500:45, 14 July 2019 diff hist +30‎ Topological data scripting/zh-cn ‎ Created page with "其中的包围盒BoundBox是一个包围目标平面的长方体，它有一条自(3,0,0)始至(5,0,2)终的对角线。可以看出，BoundBox的厚度在y轴上为0，这..."
• 00:4500:45, 14 July 2019 diff hist +218‎ N Translations:Topological data scripting/44/zh-cn ‎ Created page with "其中的包围盒BoundBox是一个包围目标平面的长方体，它有一条自(3,0,0)始至(5,0,2)终的对角线。可以看出，BoundBox的厚度在y轴上为0，这..." current
• 00:2100:21, 14 July 2019 diff hist −40‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个平面 ==== 平面就是一个简单的矩形平面。'''makePlane(length,width,[start_pnt,dir_normal])'''方法可用于创建一个平面。默认值为 st..."
• 00:2100:21, 14 July 2019 diff hist +383‎ N Translations:Topological data scripting/43/zh-cn ‎ Created page with "==== 创建一个平面 ==== 平面就是一个简单的矩形平面。'''makePlane(length,width,[start_pnt,dir_normal])'''方法可用于创建一个平面。默认值为 st..." current
• 00:1500:15, 14 July 2019 diff hist +18‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一条贝塞尔曲线 ==== 贝塞尔曲线常用于模拟平滑的曲线，绘制贝塞尔曲线要借助一系列极点（poles）以及权值。下列函数根据..."
• 00:1500:15, 14 July 2019 diff hist +329‎ N Translations:Topological data scripting/42/zh-cn ‎ Created page with "==== 创建一条贝塞尔曲线 ==== 贝塞尔曲线常用于模拟平滑的曲线，绘制贝塞尔曲线要借助一系列极点（poles）以及权值。下列函数根据..." current
• 00:0400:04, 14 July 2019 diff hist +13‎ Topological data scripting/zh-cn ‎ Created page with "==== 创建一个多边形 ==== 多边形是利用多条直边连接而成的简易连线。 makePolygon函数将获取一个点列表，并通过其中的多个点来创建..."
• 00:0400:04, 14 July 2019 diff hist +188‎ N Translations:Topological data scripting/41/zh-cn ‎ Created page with "==== 创建一个多边形 ==== 多边形是利用多条直边连接而成的简易连线。 makePolygon函数将获取一个点列表，并通过其中的多个点来创建..." current

13 July 2019

• 23:5723:57, 13 July 2019 diff hist +5‎ Topological data scripting/zh-cn ‎ Created page with "弧都是像线条那样的有效边，因此也可将其用作连线。"
• 23:5723:57, 13 July 2019 diff hist +72‎ N Translations:Topological data scripting/40/zh-cn ‎ Created page with "弧都是像线条那样的有效边，因此也可将其用作连线。" current
• 23:5123:51, 13 July 2019 diff hist +14‎ Topological data scripting/zh-cn ‎ Created page with "Arc函数仅接受Base.Vector()作为绘弧所用的点，而非元组（tuples）。arc_edge就是我们要借助Part.show(arc_edge)语句所显示的边。您也通过截取..."
• 23:5123:51, 13 July 2019 diff hist +205‎ N Translations:Topological data scripting/39/zh-cn ‎ Created page with "Arc函数仅接受Base.Vector()作为绘弧所用的点，而非元组（tuples）。arc_edge就是我们要借助Part.show(arc_edge)语句所显示的边。您也通过截取..." current
• 23:4723:47, 13 July 2019 diff hist −9‎ Topological data scripting/zh-cn ‎ Created page with "==== Creating an Arc along points ==== 可惜的是，FreeCAD并没有提供makeArc函数，但是我们有Part.Arc函数可通过3个点来创建一条弧。它经过起始..."
• 23:4723:47, 13 July 2019 diff hist +383‎ N Translations:Topological data scripting/38/zh-cn ‎ Created page with "==== Creating an Arc along points ==== 可惜的是，FreeCAD并没有提供makeArc函数，但是我们有Part.Arc函数可通过3个点来创建一条弧。它经过起始..."
• 23:1323:13, 13 July 2019 diff hist +32‎ Topological data scripting/zh-cn ‎ Created page with "arc1与arc2拼接起来即是一个圆。角度参数使用的是角度制；如果您采用的是弧度制，可简单的通过下列公式进行转换：角度 = 弧度 * 18..."
• 23:1323:13, 13 July 2019 diff hist +272‎ N Translations:Topological data scripting/37/zh-cn ‎ Created page with "arc1与arc2拼接起来即是一个圆。角度参数使用的是角度制；如果您采用的是弧度制，可简单的通过下列公式进行转换：角度 = 弧度 * 18..." current
• 10:4510:45, 13 July 2019 diff hist +22‎ Part Primitives/zh-cn ‎ Created page with "*当前，此工具可创建下列参数化几何图元 **平面 **立方体 **圆柱体 **圆锥体 **Part_Spher..."
• 10:4510:45, 13 July 2019 diff hist +543‎ N Translations:Part Primitives/3/zh-cn ‎ Created page with "*当前，此工具可创建下列参数化几何图元 **平面 **立方体 **圆柱体 **圆锥体 **Part_Spher..."
• 10:3210:32, 13 July 2019 diff hist 0‎ Part Torus/zh-cn ‎No edit summary
• 10:3210:32, 13 July 2019 diff hist 0‎ Translations:Part Torus/5/zh-cn ‎No edit summary current
• 10:3110:31, 13 July 2019 diff hist 0‎ Part Torus/zh-cn ‎No edit summary
• 10:3110:31, 13 July 2019 diff hist 0‎ Translations:Part Torus/2/zh-cn ‎No edit summary current
• 10:3110:31, 13 July 2019 diff hist 0‎ Translations:Part Torus/Page display title/zh-cn ‎No edit summary current
• 10:2810:28, 13 July 2019 diff hist 0‎ Part Primitives/zh-cn ‎ Created page with "一个用于创建各种参数化几何图元的工具。"
• 10:2810:28, 13 July 2019 diff hist +57‎ N Translations:Part Primitives/2/zh-cn ‎ Created page with "一个用于创建各种参数化几何图元的工具。"
• 10:2710:27, 13 July 2019 diff hist +1,192‎ N Part Primitives/zh-cn ‎ Created page with "零件创建图元"
• 10:2710:27, 13 July 2019 diff hist +18‎ N Translations:Part Primitives/Page display title/zh-cn ‎ Created page with "零件创建图元"
• 10:2010:20, 13 July 2019 diff hist −42‎ Part Torus/zh-cn ‎ Created page with "在零件工作台中点击环形图标32px。这会在原点(point 0,0,0)处创建一个环形。 三个角度参数(angle1, angle..."
• 10:2010:20, 13 July 2019 diff hist +282‎ N Translations:Part Torus/5/zh-cn ‎ Created page with "在零件工作台中点击环形图标32px。这会在原点(point 0,0,0)处创建一个环形。 三个角度参数(angle1, angle..."
• 10:1710:17, 13 July 2019 diff hist −3‎ Part Torus/zh-cn ‎ Created page with "'''参数'''"
• 10:1710:17, 13 July 2019 diff hist +12‎ N Translations:Part Torus/7/zh-cn ‎ Created page with "'''参数'''" current
• 10:1710:17, 13 July 2019 diff hist 0‎ Part Torus/zh-cn ‎ Created page with "== 选项 =="
• 10:1710:17, 13 July 2019 diff hist +12‎ N Translations:Part Torus/6/zh-cn ‎ Created page with "== 选项 ==" current
• 10:1710:17, 13 July 2019 diff hist +2‎ Part Torus/zh-cn ‎ Created page with "== 如何使用 =="
• 10:1710:17, 13 July 2019 diff hist +18‎ N Translations:Part Torus/4/zh-cn ‎ Created page with "== 如何使用 ==" current
• 10:1610:16, 13 July 2019 diff hist −9‎ Part Torus/zh-cn ‎ Created page with "== 描述 == 根据position, angle1, angle2, angle3, radius1 与 radius2参数创建一个简单的参数化环形。"
• 10:1610:16, 13 July 2019 diff hist +117‎ N Translations:Part Torus/2/zh-cn ‎ Created page with "== 描述 == 根据position, angle1, angle2, angle3, radius1 与 radius2参数创建一个简单的参数化环形。"
• 10:1310:13, 13 July 2019 diff hist +2,326‎ N Part Torus/zh-cn ‎ Created page with "零件环形"
• 10:1310:13, 13 July 2019 diff hist +12‎ N Translations:Part Torus/Page display title/zh-cn ‎ Created page with "零件环形"
• 10:1310:13, 13 July 2019 diff hist −100‎ Part Cone/zh-cn ‎ Created page with "== 选项 == {| | File:PartConeProperty_en.png | {{KEY|Cone}} *Radius 1 - 定义底面弧或圆的半径 *Radius 2 - 定义顶面弧或圆的半径 *Height - 零件圆锥..."
• 10:1310:13, 13 July 2019 diff hist +443‎ N Translations:Part Cone/10/zh-cn ‎ Created page with "== 选项 == {| | File:PartConeProperty_en.png | {{KEY|Cone}} *Radius 1 - 定义底面弧或圆的半径 *Radius 2 - 定义顶面弧或圆的半径 *Height - 零件圆锥..." current
• 10:0410:04, 13 July 2019 diff hist −63‎ Part Cone/zh-cn ‎ Created page with "下图展示了"Angle"为270度且其他参数为默认值的效果。"
• 10:0410:04, 13 July 2019 diff hist +70‎ N Translations:Part Cone/5/zh-cn ‎ Created page with "下图展示了"Angle"为270度且其他参数为默认值的效果。" current
• 10:0110:01, 13 July 2019 diff hist −27‎ Part Cone/zh-cn ‎ Created page with "默认值是根据定义的两个半径radius1、radius2、高度以及角度参数来创建一个截断的参数化圆锥。默认的圆锥被创建在原点(point 0,0,0)处..."
• 10:0110:01, 13 July 2019 diff hist +333‎ N Translations:Part Cone/9/zh-cn ‎ Created page with "默认值是根据定义的两个半径radius1、radius2、高度以及角度参数来创建一个截断的参数化圆锥。默认的圆锥被创建在原点(point 0,0,0)处..." current
• 09:4709:47, 13 July 2019 diff hist −2‎ Part Cone/zh-cn ‎ Created page with "== 如何使用 == 点击位于零件工作台中的图标32px。"
• 09:4709:47, 13 July 2019 diff hist +89‎ N Translations:Part Cone/8/zh-cn ‎ Created page with "== 如何使用 == 点击位于零件工作台中的图标32px。" current
• 09:4709:47, 13 July 2019 diff hist +16‎ Part Cone/zh-cn ‎ Created page with "== 描述 == 在零件工作台中，可以通过零件工具栏、Part菜单（中的primitives子菜单）或Create Primitives（创建图元）对话框来创建参数化..."
• 09:4709:47, 13 July 2019 diff hist +203‎ N Translations:Part Cone/7/zh-cn ‎ Created page with "== 描述 == 在零件工作台中，可以通过零件工具栏、Part菜单（中的primitives子菜单）或Create Primitives（创建图元）对话框来创建参数化..." current
• 09:3909:39, 13 July 2019 diff hist +1,875‎ N Part Cone/zh-cn ‎ Created page with "零件圆锥"