User contributions for Vocx
3 November 2020
- 22:1222:12, 3 November 2020 diff hist +212 Video tutorials for product design FreeCAD for Beginners: a series of videos by DrVax, introducing FreeCAD 0.19, and using it for 3D printing with Cura and PrusaSlicer.
16 October 2020
- 00:4300:43, 16 October 2020 diff hist +181 Sketcher Workbench Decrease B-spline degree, currently this command is not implemented. (v0.19)
15 October 2020
- 17:3417:34, 15 October 2020 diff hist 0 Sketcher Workbench Change the order of the commands
- 17:1317:13, 15 October 2020 diff hist +1,339 N Sketcher StopOperation Stop operation stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.
- 16:3516:35, 15 October 2020 diff hist +82 N File:Sketcher StopOperation.svg Same as "process-stop.svg"; use this name to match the command name. current
- 16:3116:31, 15 October 2020 diff hist +184 Sketcher Workbench Stop operation: when in edit mode, stop the current operation, whether that is drawing, setting constraints, etc.
14 October 2020
- 01:0101:01, 14 October 2020 diff hist +31 Artwork MeshPart File:MeshPart_CurveOnMesh.svg
- 01:0101:01, 14 October 2020 diff hist +145 N File:MeshPart CurveOnMesh.svg New icon added in v0.19. It is the same as "Surface_CurveOnMesh.svg" but using the green tone of the Mesh and MeshPart workbenches. current
13 October 2020
- 05:0005:00, 13 October 2020 diff hist +24 Artwork MeshPart Correct path "icons/actions" are in lowercase; the icons are shown at their original size.
12 October 2020
- 00:2100:21, 12 October 2020 diff hist +34 Part Module File:Part_ColorFace.svg, for the Part_ColorPerFace command.
- 00:2000:20, 12 October 2020 diff hist −20 Part ColorPerFace Do not center the image. Left aligned is fine.
- 00:1200:12, 12 October 2020 diff hist −1 Part Module Part_ProjectionOnSurface.svg instead of PNG
- 00:1000:10, 12 October 2020 diff hist 0 File:Part CompoundFilter.svg Vocx uploaded a new version of File:Part CompoundFilter.svg current
- 00:0900:09, 12 October 2020 diff hist 0 File:Part Thickness.svg Vocx uploaded a new version of File:Part Thickness.svg
- 00:0800:08, 12 October 2020 diff hist +664 Artwork Part Organize the icons in new folders, new in v0.19; booleans, create, measure, parametric, tools
- 00:0400:04, 12 October 2020 diff hist +69 N File:Part 2D object.svg Basic icon for the viewprovider of Part::Part2DObjects.
11 October 2020
- 23:5923:59, 11 October 2020 diff hist +144 N File:Part FeatureImport.svg Big icon 64x64 px for this icon that appears when an Python object (feature) cannot be loaded from a specified path in the object.
- 23:4823:48, 11 October 2020 diff hist 0 File:Part Feature.svg Vocx uploaded a new version of File:Part Feature.svg
- 23:4623:46, 11 October 2020 diff hist +35 N File:PartFeature.svg Vocx moved page File:PartFeature.svg to File:Part Feature.svg: This is the correct name that it has in the source code. current Tag: New redirect
- 23:4623:46, 11 October 2020 diff hist 0 m File:Part Feature.svg Vocx moved page File:PartFeature.svg to File:Part Feature.svg: This is the correct name that it has in the source code.
- 23:4023:40, 11 October 2020 diff hist +156 N File:Part Shape from Mesh.svg This is the original name of the icon in the source code, so the wiki should have this name exactly. The command name is "Part_ShapeFromMesh". current
- 23:2623:26, 11 October 2020 diff hist +37 Part Module Icon Part_ReverseShapes.svg
- 23:2523:25, 11 October 2020 diff hist −15 Part ReverseShape Remove |Empty=1 so that it picks the icon automatically
- 23:2423:24, 11 October 2020 diff hist +69 N File:Part Reverse Shape.svg New icon in v0.19 for the command "Part_ReverseShapes". current
- 23:1923:19, 11 October 2020 diff hist 0 File:Part ProjectionOnSurface.svg Vocx uploaded a new version of File:Part ProjectionOnSurface.svg
- 23:1523:15, 11 October 2020 diff hist +113 N File:Part ColorFace.svg Icon for the "Part_ColorPerFace" tool which was deactivated in v0.13, but is available in the menu.
- 23:1323:13, 11 October 2020 diff hist +83 N File:Part Tube Parametric.svg Parametric icon for this tool which is added to the toolbar in v0.19. current
- 22:4422:44, 11 October 2020 diff hist 0 File:Sketcher Move.svg Vocx uploaded a new version of File:Sketcher Move.svg
- 20:4820:48, 11 October 2020 diff hist +58 Pivy →Older: These links provide reference documentation for Coin v3.x. The differences with v4.x are minimal, so they may still be useful.
- 19:0419:04, 11 October 2020 diff hist +254 Pivy latest automatically generated Doxygen documentation.
- 18:4318:43, 11 October 2020 diff hist +83 PartDesign Body Button template for better presentation of the mentioned commands
8 October 2020
- 01:4101:41, 8 October 2020 diff hist −5 Part ProjectionOnSurface Given a source Shape, this tool can project edges, wires (closed edges), or entire faces from it;
- 01:3701:37, 8 October 2020 diff hist +1 m Part ProjectionOnSurface Given a source Shape, this tool can project entire faces, or only a collection of edges from it;
- 01:2301:23, 8 October 2020 diff hist +166 Part ProjectionOnSurface Given a source Shape, this tool can project entire face, or only a collection of edges from it; the result can be new edges, new faces, or even new extruded solids which can be used in further boolean operations for effects such as engraving or stamping.
7 October 2020
- 21:4821:48, 7 October 2020 diff hist +64 Getting started Tutorials, Video tutorials
5 October 2020
- 18:1318:13, 5 October 2020 diff hist +1,395 Release notes 0.19 The TechDraw Workbench has been upgraded in an important way. It has many new features with respect to v0.18, which make it much more useful to produce technical illustrations of 3D solids.
- 17:2617:26, 5 October 2020 diff hist +186 N File:FreeCAD highlight 4 0.19.png Same as "Techdraw_ballon.png"; use this name because it will be used to highlight the development of v0.19. We want it to be a static image, so it doesn't change over time. current
- 17:2017:20, 5 October 2020 diff hist +205 Release notes 0.19 The center marks created from circular edges, can now be printed;
4 October 2020
- 05:5205:52, 4 October 2020 diff hist +580 Release notes 0.19 The Surface Workbench documentation has been rewritten, and expanded with more images and scripting examples, in order to showcase better the tools of the workbench.
- 05:2305:23, 4 October 2020 diff hist +277 Surface GeomFillSurface →Twisting of the surface: When the surface's Lighting property is One side, a face will be painted completely black if its normal direction points into the 3D view (away from the current viewer), indicating a flipped face with respect to the other colored faces.
- 05:1005:10, 4 October 2020 diff hist −36 Surface GeomFillSurface Removed UnfinishedDocu template because the information has more or less been updated.
- 05:1005:10, 4 October 2020 diff hist +529 Surface Sections Twisting of the surface: The shape of the surface depends on the direction of the chosen edges; if edges are selected and the result is a surface that "twists" on itself, one of the edges may need its list of vertices in the reverse order.
- 05:0305:03, 4 October 2020 diff hist +617 Surface GeomFillSurface →Twisting of the surface: Left: the boundary edges are oriented in the same direction, and thus the generated surface is smooth. Right: the boundary edges have opposite directions, and thus the generated surface twists on itself, resulting in self-intersections.
- 04:5704:57, 4 October 2020 diff hist +200 Part TopoShape You can obtain a quick summary of all methods using Python's built-in help() function.
- 04:4404:44, 4 October 2020 diff hist +95 N File:Surface twisting example twisted.png Example of a twisted surface where the edges are oriented in opposite directions. current
- 04:4304:43, 4 October 2020 diff hist +93 N File:Surface twisting example smooth.png Example of a smooth surface where the edges are oriented in the same direction. current
- 04:3604:36, 4 October 2020 diff hist +12 Surface GeomFillSurface Surface GeomFillSurface creates a parametric surface from two, three, or four boundary edges, trying to create a smooth transition between them.
- 04:2604:26, 4 October 2020 diff hist +33 Surface GeomFillSurface Moved the "Twisting" section before the scripting section
- 04:2404:24, 4 October 2020 diff hist +13 Surface GeomFillSurface →Twisting: Section on twisting of the surface
- 04:2404:24, 4 October 2020 diff hist +1,211 Surface GeomFillSurface The shape of the surface depends a lot on the direction of the chosen edges; if various edges are selected and the result is a surface that "twists" on itself, one of the edges may need its list of vertices in the reverse order.
- 03:2603:26, 4 October 2020 diff hist +490 Surface GeomFillSurface Left: edges that are used to generate a surface with the GeomFillSurface tool, 4 connected edges, 3 connected edges, and 2 disconnected edges. Right: resulting surface from using the 4, 3, and 2 edges, respectively.
- 03:2203:22, 4 October 2020 diff hist +85 N File:Surface GeomFillSurface 2 edges example.png Surface created from two edges with the "Surface_GeomFillSurface" tool. current
- 03:2203:22, 4 October 2020 diff hist +75 N File:Surface GeomFillSurface 2 edges.png Two edges to be used with the "Surface_GeomFillSurface" tool. current
- 03:2103:21, 4 October 2020 diff hist +97 N File:Surface GeomFillSurface 3 edges example.png Surface created from three connected edges with the "Surface_GeomFillSurface" tool. current
- 03:2003:20, 4 October 2020 diff hist +87 N File:Surface GeomFillSurface 3 edges.png Three connected edges to be used with the "Surface_GeomFillSurface" tool. current
- 03:2003:20, 4 October 2020 diff hist +96 N File:Surface GeomFillSurface 4 edges example.png Surface created from four connected edges with the "Surface_GeomFillSurface" tool. current
- 03:1903:19, 4 October 2020 diff hist +86 N File:Surface GeomFillSurface 4 edges.png Four connected edges to be used with the "Surface_GeomFillSurface" tool. current
- 03:0503:05, 4 October 2020 diff hist +2,489 Surface GeomFillSurface Surface GeomFillSurface creates a surface from two, three or four boundary edges, trying to create a smooth transition between them.
- 02:4802:48, 4 October 2020 diff hist +2 Surface Sections NSections: a list of edges that will be used to build the surface.
3 October 2020
- 23:5423:54, 3 October 2020 diff hist −3 Surface Sections |MenuLocation=Surface → Sections
- 23:5423:54, 3 October 2020 diff hist −3 Surface Filling |MenuLocation=Surface → Filling
- 23:3823:38, 3 October 2020 diff hist +2 Surface CurveOnMesh MenuLocation=Surface → Curve on mesh
- 23:3623:36, 3 October 2020 diff hist −37 Surface ExtendFace Removed UnfinishedDocu template because the information has more or less been updated.
- 23:3523:35, 3 October 2020 diff hist −36 Surface Filling Removed UnfinishedDocu template because the information has more or less been updated.
- 23:3423:34, 3 October 2020 diff hist −36 Surface CurveOnMesh Removed UnfinishedDocu template because the information has more or less been updated.
- 23:3223:32, 3 October 2020 diff hist −36 Surface Workbench Removed UnfinishedDocu template because the information has more or less been updated.
- 06:5706:57, 3 October 2020 diff hist +197 Surface CurveOnMesh Above left: mesh object with selected points on the surface. Above right: splines created by picking several points on the mesh. Lower left: a parametric surface reconstructed from the approximated splines, using Surface Sections.
- 06:3706:37, 3 October 2020 diff hist +122 N File:Surface CurveOnMesh surface example.png Parametric surface reconstructed from the approximation splines generated from the Surface_CurveOnMesh tool. current
- 06:3606:36, 3 October 2020 diff hist +118 N File:Surface CurveOnMesh example.png Approximation splines generated from selected points on top of a mesh, for the Surface_CurveOnMesh tool. current
- 06:3506:35, 3 October 2020 diff hist +82 N File:Surface CurveOnMesh mesh example.png Selection points on top of a mesh, for the Surface_CurveOnMesh tool. current
- 06:1006:10, 3 October 2020 diff hist −22 m Surface CurveOnMesh Press the curve on mesh button
- 00:4200:42, 3 October 2020 diff hist +821 Surface CurveOnMesh If Spline approximation is checked, the Curve on mesh tool creates a Part Spline which is derived from the basic Part Feature
- 00:3700:37, 3 October 2020 diff hist +192 N File:Part Spline.svg Same as "Part_Spline_Parametric.svg". Use this name to match the command name, although currently there is no command to create this object, except through the Surface Workbench. current
- 00:2700:27, 3 October 2020 diff hist +1,330 Surface CurveOnMesh Information of the options of the tool; this information needs to be verified by looking exactly at the source code. Otherwise it's hard to infer what the options really mean.
2 October 2020
- 23:2923:29, 2 October 2020 diff hist −64 Surface CurveOnMesh Depending on how smooth the original mesh is, one spline or multiple splines will be created in the tree view.
- 23:0423:04, 2 October 2020 diff hist +784 Surface Filling Limitations section taken from the main Surface Workbench page, as these limitations mostly apply to this Filling tool
- 22:5922:59, 2 October 2020 diff hist −486 Surface Workbench Move limitations section to Surface_Filling, as they mostly apply to it
- 22:2822:28, 2 October 2020 diff hist +701 Surface Filling Better description of the non-boundary edges, and non-boundary vertices.
- 22:2422:24, 2 October 2020 diff hist +256 Surface Workbench Better explanations and icons
- 21:3921:39, 2 October 2020 diff hist −47 Surface Filling Curvature: non-boundary edges, Curvature: non-boundary vertices
- 20:1920:19, 2 October 2020 diff hist +26 Surface Filling The sections will be called "Boundary edges", "Non-boundary edges", "Non-boundary vertices"
- 19:0119:01, 2 October 2020 diff hist −24 Surface CurveOnMesh Clear: it will erase the tentative points that have been picked on the mesh, and will allow you to pick new ones.
- 18:5418:54, 2 October 2020 diff hist +537 Surface CurveOnMesh Left: mesh object with selected points on the surface. Right: splines created by picking several points. For future addition of images.
- 18:4018:40, 2 October 2020 diff hist +1,894 Surface CurveOnMesh More clear steps on how to use the tool
- 15:5615:56, 2 October 2020 diff hist +407 Surface CurveOnMesh Surface_CurveOnMesh creates approximated spline segments on top of a selected mesh. If the object is not a Mesh, but a parametric Shape or surface, it must be converted first to a mesh.
- 07:3107:31, 2 October 2020 diff hist +76 Part ShapeFromMesh The inverse operation is Mesh FromPartShape from the Mesh Workbench.
- 07:3007:30, 2 October 2020 diff hist +307 Mesh FromPartShape The inverse operation is Part ShapeFromMesh from the Part Workbench.
- 07:2607:26, 2 October 2020 diff hist +72 Surface Workbench If the object is not a Mesh, but a parametric Shape, it must be converted to a mesh using Mesh FromPartShape.
- 07:2407:24, 2 October 2020 diff hist +131 Part ShapeFromMesh The inverse operation is Mesh FromPartShape.
1 October 2020
- 23:5623:56, 1 October 2020 diff hist +21 LinkSubList See also: FreeCAD Scripting Basics, LinkSub.
- 23:5523:55, 1 October 2020 diff hist +2,587 N LinkSub A LinkSub is a data structure that is used as input to various functions and objects; its purpose is to pass a subobject or subelement (vertex, edge, or face) from an object to another object that will use or transform that geometry.
- 23:4223:42, 1 October 2020 diff hist +4 LinkSubList Use Vertex instead of Face
- 23:4023:40, 1 October 2020 diff hist +237 LinkSubList It is important to recompute the objects before their subelements are used as input for other objects, otherwise an error may be produced as the geometry may not contain a valid Shape.
- 23:3623:36, 1 October 2020 diff hist +148 LinkSubList It is possible to see that a LinkSubList is a list of LinkSub structures. Each tuple is in fact a LinkSub.
- 23:3223:32, 1 October 2020 diff hist +11 LinkSubList The second element of the tuple can itself be a list of strings, indicating various subelements of the same document object.
- 23:2723:27, 1 October 2020 diff hist −6 App DocumentObject It is usually better to subclass one of the more complex classes,
- 23:2323:23, 1 October 2020 diff hist +31 LinkSubList Each tuple contains at least two elements; the first element is a reference to a document object
- 23:0723:07, 1 October 2020 diff hist −15 Surface ExtendFace →Usage: The object could be created with the Surface Workbench but it could also be any other object, for example, created with Part or PartDesign.
- 23:0323:03, 1 October 2020 diff hist +48 Surface ExtendFace →Description: Surface_ExtendFace_base_example.png, Surface_ExtendFace_example.png
- 23:0123:01, 1 October 2020 diff hist +93 N File:Surface ExtendFace example.png Resulting surface after using "Surface_ExtendFace" command with a base surface. current
- 23:0123:01, 1 October 2020 diff hist +71 N File:Surface ExtendFace base example.png Base surface for using with "Surface_ExtendFace" command. current
- 22:3722:37, 1 October 2020 diff hist +21 Surface ExtendFace →Scripting: One less point for the example surface
- 22:2922:29, 1 October 2020 diff hist −264 Surface ExtendFace →Scripting: Improved code, less lines so it's more readable
- 22:2122:21, 1 October 2020 diff hist +145 Surface ExtendFace →Scripting: Better script
- 22:1322:13, 1 October 2020 diff hist +345 Surface ExtendFace →Data: More information
- 21:5821:58, 1 October 2020 diff hist +382 Surface ExtendFace →Usage: Make sure you have an object that has faces. The object doesn't need to be a surface created with the Surface Workbench, it can be any solid object, for example, created with Part or PartDesign
- 21:4621:46, 1 October 2020 diff hist −5 Template:Surface Tools navi Filling, Fill boundary curves, Sections, Extend face, Curve on mesh
- 18:4418:44, 1 October 2020 diff hist −5 PySide Small changes
- 18:4018:40, 1 October 2020 diff hist −2 PySide If you are compiling yourself then you must verify that these two libraries are installed in order for FreeCAD to run correctly
- 18:3918:39, 1 October 2020 diff hist +34 PySide Python
- 05:0705:07, 1 October 2020 diff hist +1 Surface Workbench Extend face: extrapolates the surface at the boundaries with its local u-parameter and v-parameter.
- 05:0405:04, 1 October 2020 diff hist +33 Artwork Surface Surface_CurveOnMesh.svg, new icon in v0.19 for the existing command "Surface_CurveOnMesh".
- 05:0305:03, 1 October 2020 diff hist +79 N File:Surface CurveOnMesh.svg New icon in v0.19 for the existing command "Surface_CurveOnMesh".
- 04:4604:46, 1 October 2020 diff hist +35 Surface Workbench File:Surface_CurveOnMesh.svg
- 04:4504:45, 1 October 2020 diff hist +53 Surface CurveOnMesh MenuCommand template
30 September 2020
- 23:4923:49, 30 September 2020 diff hist +3 Surface ExtendFace →Properties: A Surface Extend object is derived from the basic Part Feature class.
- 23:4823:48, 30 September 2020 diff hist −776 Surface ExtendFace →Data: Properties
- 22:5322:53, 30 September 2020 diff hist −129 Artwork Surface Remove the old icons
- 22:5122:51, 30 September 2020 diff hist +86 N File:Surface ExtendFace.svg Same as "Surface_Extend.svg"; use this name to match the command's name.
- 16:4616:46, 30 September 2020 diff hist 0 Surface Workbench Vertices not vertexes
- 06:3606:36, 30 September 2020 diff hist +105 Surface ExtendFace Correct name Name=Surface ExtendFace
- 06:3306:33, 30 September 2020 diff hist +37 Surface Workbench File:Surface_ExtendFace.svg
- 06:3206:32, 30 September 2020 diff hist +263 Surface Filling Surface Filling creates a surface from a series of connected boundary edges.
- 06:2806:28, 30 September 2020 diff hist −1 m Surface Workbench remove space
- 06:2806:28, 30 September 2020 diff hist +82 Surface GeomFillSurface Button template
- 06:2606:26, 30 September 2020 diff hist +46 Surface Sections →Description: Button template
- 06:2506:25, 30 September 2020 diff hist +14 Surface GeomFillSurface |Version=0.17
- 06:2406:24, 30 September 2020 diff hist +4,756 N Surface ExtendFace Surface Extend extrapolates an existing face or surface at its boundaries with its local U and V parameters.
- 06:0606:06, 30 September 2020 diff hist −64 Surface Filling →Scripting: Better code with better points
- 06:0106:01, 30 September 2020 diff hist +147 Surface Filling →Scripting: Better code. With control vertices.
- 05:3105:31, 30 September 2020 diff hist +434 Surface Sections →Properties: A Surface Sections is derived from the basic Part Feature, therefore it shares all the latter's properties.
- 05:2405:24, 30 September 2020 diff hist +1 Surface Filling Remove edge: press once to start picking edges in the 3D view; these must be edges that were previously picked with Add edge.
- 05:2405:24, 30 September 2020 diff hist +4 Surface Sections →Options: Remove edge: press once to start picking edges in the 3D view; these must be edges that were previously picked with Add edge.
- 05:1905:19, 30 September 2020 diff hist +1 Surface Filling →Scripting: All objects with edges need to be computed before they can be used as input for the properties of the Filling object.
- 05:1905:19, 30 September 2020 diff hist +123 Surface Sections →Scripting: All objects with edges need to be computed before they can be used as input for the properties of the Sections object.
- 05:1905:19, 30 September 2020 diff hist +119 Surface Filling →Scripting: All objects with edges need to be computed before they can be used as input for the properties of the Filling object.
- 05:1805:18, 30 September 2020 diff hist 0 m Surface Sections →Scripting: small changes
- 05:1705:17, 30 September 2020 diff hist +2,290 Surface Filling All properties of the object
- 05:0605:06, 30 September 2020 diff hist 0 m Part Feature Link
- 04:4204:42, 30 September 2020 diff hist +1,352 Surface Filling Information on the function of the task panel.
- 04:3404:34, 30 September 2020 diff hist +1,975 Surface Filling Complete code example
- 03:1703:17, 30 September 2020 diff hist −3 Surface Workbench Remove ellipsis
- 03:1603:16, 30 September 2020 diff hist +787 Surface Filling The base edges that form the closed contour, as well as the auxiliary vertices and edges, can belong to 2D curves but can also belong to 3D solid objects.
- 02:1702:17, 30 September 2020 diff hist +102 Surface Filling More complete description of the usage
- 01:1301:13, 30 September 2020 diff hist +852 Surface Filling More detailed steps
29 September 2020
- 23:4423:44, 29 September 2020 diff hist 0 File:Workbench Surface.svg Vocx uploaded a new version of File:Workbench Surface.svg
- 23:2923:29, 29 September 2020 diff hist +3 Surface Filling Remove the |Icon parameter to automatically find the command name
- 23:2623:26, 29 September 2020 diff hist +5 Surface GeomFillSurface Proper command name to find the correct icon name
- 23:2323:23, 29 September 2020 diff hist 0 File:Surface Sewing.svg Vocx uploaded a new version of File:Surface Sewing.svg
- 23:0323:03, 29 September 2020 diff hist 0 File:Surface Sewing.svg Vocx uploaded a new version of File:Surface Sewing.svg
- 22:5422:54, 29 September 2020 diff hist +20 Surface Workbench The icons' names match the commands' names.
- 22:5322:53, 29 September 2020 diff hist +95 N File:Surface GeomFillSurface.svg Same icon as "Surface_BSplineSurface". Use this name to match the command's name.
- 22:5122:51, 29 September 2020 diff hist +245 Artwork Surface New set of icons, updated in v0.19.
- 22:5122:51, 29 September 2020 diff hist +119 N File:Surface Workbench.svg New icon updated in v0.19. Previously a hard-coded XPM was used, now it's the same as the 'Surface' icon.
- 22:5022:50, 29 September 2020 diff hist +40 N File:Surface Surface.svg New icon updated in v0.19.
- 22:5022:50, 29 September 2020 diff hist +40 N File:Surface Sewing.svg New icon updated in v0.19.
- 22:4922:49, 29 September 2020 diff hist 0 File:Surface Sections.svg Vocx uploaded a new version of File:Surface Sections.svg
- 22:4922:49, 29 September 2020 diff hist +40 N File:Surface Filling.svg New icon updated in v0.19.
- 22:4922:49, 29 September 2020 diff hist +40 N File:Surface Cut.svg New icon updated in v0.19.
- 22:4822:48, 29 September 2020 diff hist +40 N File:Surface BSplineSurface.svg New icon updated in v0.19.
- 22:4822:48, 29 September 2020 diff hist +40 N File:Surface BezierSurface.svg New icon updated in v0.19.
- 02:1502:15, 29 September 2020 diff hist +131 Surface Workbench Button template for better presentation of the mentioned commands
- 02:1202:12, 29 September 2020 diff hist −2 Surface Workbench Surface Tools navi to categorize the page
- 02:1002:10, 29 September 2020 diff hist −17 Surface Workbench Remove "Thumb" option from image. It will stay in place.
28 September 2020
- 15:2215:22, 28 September 2020 diff hist +96 BIM Workbench See FreeCAD BIM migration guide.
- 15:2115:21, 28 September 2020 diff hist +95 Arch Workbench See FreeCAD BIM migration guide
- 06:1106:11, 28 September 2020 diff hist +81 N File:Surface Sections.svg Icon for the "Surface_Sections" command, newly introduced in v0.19.
- 06:1006:10, 28 September 2020 diff hist −31 Artwork Surface Surface Tools navi to categorize the page
- 00:2800:28, 28 September 2020 diff hist +1,313 Surface Sections →Usage: Options describing Add edge and Remove edge
- 00:0600:06, 28 September 2020 diff hist +47 Draft BSpline closed=False for the code.
- 00:0200:02, 28 September 2020 diff hist +191 Draft BSpline Button template for better presentation of the mentioned commands
27 September 2020
- 23:3823:38, 27 September 2020 diff hist +14 Release notes 0.19 Link to Asymptote
- 23:1423:14, 27 September 2020 diff hist +232 Asymptote →Generating Asymptote code from FreeCAD.
- 23:0723:07, 27 September 2020 diff hist +261 Release notes 0.19 The developers of Draft, Arch, and BIM Workbenches also collaborate with the greater OSArch community, with the ultimate goal of improving building design by using entirely free software.
- 23:0023:00, 27 September 2020 diff hist +330 Release notes 0.19 The Surface Sections object has been added to create surfaces from edges that represent transversal sections.
- 22:5322:53, 27 September 2020 diff hist +71 Surface Sections →Description: Surface_Sections_edges_example.png, Surface_Sections_example.png
- 22:4922:49, 27 September 2020 diff hist +64 N File:Surface Sections example.png Example of "Surface_Section" object, new in v0.19. current
- 22:4922:49, 27 September 2020 diff hist +75 N File:Surface Sections edges example.png Edges used to built a "Surface_Section" object, new in v0.19. current
- 22:3422:34, 27 September 2020 diff hist +16 Surface Sections →Scripting: doc.recompute() missing
- 22:0022:00, 27 September 2020 diff hist +2,253 N LinkSubList A LinkSubList is a data structure that is used as input to various functions and objects; its purpose is to pass a subobject or subelement (vertex, edge, or face) from an object to another object that will use or transform that geometry.
- 20:5220:52, 27 September 2020 diff hist +703 Surface Sections →Scripting: More complete example
- 19:3419:34, 27 September 2020 diff hist +1,868 N Surface Sections Surface Sections is used to create a surface from edges that represent transversal sections of surface.
- 18:5718:57, 27 September 2020 diff hist +351 Object name When using expressions, the Label can be referenced using double brackets made of the less than and greater than symbols.
- 18:2618:26, 27 September 2020 diff hist +162 Surface Workbench Sections: creates a surface from edges that represent transversal sections of surface. New in v0.19.
- 18:2318:23, 27 September 2020 diff hist −10 Template:Userdocnavi Surface
- 18:2118:21, 27 September 2020 diff hist +135 Part Module Tube: draws a tube by specifying its internal radius and external radius.
- 18:2118:21, 27 September 2020 diff hist +78 N File:Part Tube.svg New icon for the Tube feature. The icon was introduced in v0.19. current
- 06:5706:57, 27 September 2020 diff hist −48 Sketcher DeleteAllConstraints Remove Icon, now it finds the icon automatically
- 06:5606:56, 27 September 2020 diff hist 0 File:Sketcher DeleteAllGeometry.svg Vocx uploaded a new version of File:Sketcher DeleteAllGeometry.svg
- 06:5506:55, 27 September 2020 diff hist 0 File:Sketcher DeleteAllConstraints.svg Vocx uploaded a new version of File:Sketcher DeleteAllConstraints.svg
- 06:5306:53, 27 September 2020 diff hist +77 Artwork Sketcher Sketcher_DeleteConstraints.svg, Sketcher_DeleteGeometry.svg; new icons used for existing tools
- 06:5206:52, 27 September 2020 diff hist +84 N File:Sketcher DeleteGeometry.svg New icon in v0.19 for the existing tool, "Sketcher_DeleteAllGeometry".
- 06:5206:52, 27 September 2020 diff hist +86 N File:Sketcher DeleteConstraints.svg New icon in v0.19 for the existing tool "Sketcher_DeleteAllConstraints".
- 06:3106:31, 27 September 2020 diff hist 0 File:Sketcher SelectElementsAssociatedWithConstraints.svg Vocx uploaded a new version of File:Sketcher SelectElementsAssociatedWithConstraints.svg
- 06:3106:31, 27 September 2020 diff hist 0 File:Sketcher SelectConstraints.svg Vocx uploaded a new version of File:Sketcher SelectConstraints.svg
- 06:3006:30, 27 September 2020 diff hist 0 File:Sketcher SelectRedundantConstraints.svg Vocx uploaded a new version of File:Sketcher SelectRedundantConstraints.svg
- 06:2906:29, 27 September 2020 diff hist 0 File:Sketcher SelectConflictingConstraints.svg Vocx uploaded a new version of File:Sketcher SelectConflictingConstraints.svg
26 September 2020
- 21:0421:04, 26 September 2020 diff hist +7 Sketcher Workbench Button template
- 20:4920:49, 26 September 2020 diff hist −1 Sketcher Workbench File:Sketcher_SwitchVirtualSpace.svg
- 20:4720:47, 26 September 2020 diff hist +22 Sketcher SwitchVirtualSpace if you decide to set constraints on the second virtual space, don't forget about them later on if you don't see them in the 3D view.
- 20:3320:33, 26 September 2020 diff hist +135 Sketcher BSplineDecreaseKnotMultiplicity Button template
- 20:3120:31, 26 September 2020 diff hist +134 Sketcher BSplineIncreaseKnotMultiplicity Button template
- 20:2920:29, 26 September 2020 diff hist +242 Sketcher BSplineIncreaseDegree Remove Icon, now it finds the icon automatically; at the moment there is no B-spline decrease degree command
- 18:5218:52, 26 September 2020 diff hist +157 Sketcher Workbench File:Sketcher_BSplineConvertToNURB.svg, The wiki page is called "Sketcher ConvertToNURB" but the command is called "Sketcher BSplineConvertToNURB" so the page must be renamed accordingly.
- 18:2818:28, 26 September 2020 diff hist +99 N File:Sketcher BSplineConvertToNURB.svg Same as "Sketcher_BSplineApproximate.svg"; use this name to match the command's name. current
- 17:5617:56, 26 September 2020 diff hist −19 Sketcher Workbench Update icons: Sketcher_RestoreInternalAlignmentGeometry.svg, Sketcher_DeleteAllGeometry.svg, Sketcher_DeleteAllConstraints.svg
- 17:4817:48, 26 September 2020 diff hist +3 Sketcher DeleteAllGeometry Button template
- 17:4817:48, 26 September 2020 diff hist +36 Sketcher DeleteAllConstraints Sketch → Sketcher tools → 16px Delete All Constraints
- 17:3917:39, 26 September 2020 diff hist −5 Sketcher DeleteAllGeometry 16px
- 17:3517:35, 26 September 2020 diff hist +109 N File:Sketcher DeleteAllConstraints.svg Same as "Sketcher_Element_SelectionTypeInvalid.svg"; use this name to match the command's name.
- 17:3417:34, 26 September 2020 diff hist +109 N File:Sketcher DeleteAllGeometry.svg Same as "Sketcher_Element_SelectionTypeInvalid.svg"; use this name to match the command's name.
- 17:3217:32, 26 September 2020 diff hist +80 Sketcher RectangularArray 16px Rectangular array
- 17:2717:27, 26 September 2020 diff hist +44 Sketcher Move 16px Move
- 17:2317:23, 26 September 2020 diff hist +72 Sketcher Copy 16px Sketcher Copy
- 17:1817:18, 26 September 2020 diff hist +98 Sketcher Clone 16px Sketcher Clone
- 17:1417:14, 26 September 2020 diff hist +1 Sketcher Symmetry Button template
- 17:0317:03, 26 September 2020 diff hist +132 Sketcher SelectElementsAssociatedWithConstraints 16px Select Elements Associated With Constraints
- 17:0017:00, 26 September 2020 diff hist −17 Sketcher SelectConflictingConstraints 16px Select Conflicting Constraints
- 16:1916:19, 26 September 2020 diff hist −17 Sketcher SelectRedundantConstraints MenuCommand
- 16:1816:18, 26 September 2020 diff hist −15 Sketcher SelectHorizontalAxis MenuCommand
- 16:1616:16, 26 September 2020 diff hist −16 Sketcher SelectVerticalAxis 16px Select Vertical Axis
- 16:1016:10, 26 September 2020 diff hist −17 Sketcher SelectOrigin 16px Select origin
- 16:0516:05, 26 September 2020 diff hist +31 Sketcher SelectConstraints 16px Select constraints
- 16:0216:02, 26 September 2020 diff hist +59 Sketcher ConnectLines 16px Connect lines
- 16:0016:00, 26 September 2020 diff hist +79 Sketcher CloseShape 16px Close Shape
- 15:5315:53, 26 September 2020 diff hist −38 Sketcher SelectElementsWithDoFs Proper name Sketcher SelectElementsWithDoFs
- 06:3706:37, 26 September 2020 diff hist +61 Sketcher ToggleActiveConstraint Button template
- 06:3506:35, 26 September 2020 diff hist +70 Sketcher ToggleDrivingConstraint File:Sketcher ToggleDrivingConstraint.svg, proper name of the command
- 06:2906:29, 26 September 2020 diff hist +221 Sketcher RestoreInternalAlignmentGeometry File:Sketcher_RestoreInternalAlignmentGeometry.svg, button template
- 06:1806:18, 26 September 2020 diff hist +100 N File:Sketcher RestoreInternalAlignmentGeometry.svg Same as "Sketcher_Element_Ellipse_All.svg"; use this name to match the command's name.
- 06:0006:00, 26 September 2020 diff hist +9 Sketcher ConstrainSnellsLaw Image:Snells_law2_witheq.svg|x400px
- 05:5405:54, 26 September 2020 diff hist +91 Sketcher ConstrainAngle File:Sketcher_ConstrainAngle.svg
- 05:4905:49, 26 September 2020 diff hist +86 Sketcher ConstrainDiameter File:Sketcher_ConstrainDiameter.svg
- 05:3705:37, 26 September 2020 diff hist +23 Sketcher ConstrainRadius File:Sketcher_ConstrainRadius.svg
- 05:3605:36, 26 September 2020 diff hist +72 Sketcher ConstrainDistance Button template
- 05:2905:29, 26 September 2020 diff hist +46 Sketcher ConstrainDistanceX File:Sketcher_ConstrainDistanceX.svg
- 05:2905:29, 26 September 2020 diff hist +73 Sketcher ConstrainDistanceY File:Sketcher_ConstrainDistanceY.svg
- 05:2705:27, 26 September 2020 diff hist +32 Sketcher ConstrainDistanceX File:Sketcher_ConstrainDistanceX.svg
- 05:2405:24, 26 September 2020 diff hist 0 File:Sketcher ConstrainDistance.svg Vocx uploaded File:Sketcher ConstrainDistance.svg
- 05:2005:20, 26 September 2020 diff hist −53 File:Sketcher ConstrainDistance.svg Remove the redirect Tag: Blanking
- 05:1905:19, 26 September 2020 diff hist +21 Sketcher Workbench Sketcher_ConstrainLock.svg, Sketcher_ConstrainDistanceX.svg, Sketcher_ConstrainDistanceY.svg, Sketcher_ConstrainDistance.svg, Sketcher_ConstrainRadius.svg, Sketcher_ConstrainDiameter.svg, Sketcher_ConstrainAngle.svg, Sketcher_ConstrainSnellsLaw.svg, Sketcher_ConstrainInternalAlignment.svg, Sketcher_ToggleDrivingConstraint.svg
- 05:1605:16, 26 September 2020 diff hist +100 N File:Sketcher ConstrainInternalAlignment.svg Same as "Constraint_InternalAlignment.svg"; use this name to match the command's name. current
- 05:1305:13, 26 September 2020 diff hist +92 N File:Sketcher ConstrainSnellsLaw.svg Same as "Constraint_SnellsLaw.svg"; use this name to match the command's name.
- 05:1005:10, 26 September 2020 diff hist +96 N File:Sketcher ConstrainAngle.svg Same as "Constraint_InternalAngle.svg"; use this name to match the command's name.
- 05:0905:09, 26 September 2020 diff hist +89 N File:Sketcher ConstrainRadius.svg Same as "Constraint_Radius.svg"; use this name to match the command's name.
- 05:0405:04, 26 September 2020 diff hist +43 Sketcher ConstrainLock Button template
- 04:5504:55, 26 September 2020 diff hist +54 Sketcher ConstrainBlock Button template
- 04:5404:54, 26 September 2020 diff hist +23 Sketcher Workbench Block: it blocks an edge from moving, that is, it prevents its vertices from changing their current positions. It should be particularly useful to fix the position of B-Splines.
- 04:5004:50, 26 September 2020 diff hist +15 Sketcher ConstrainSymmetric File:Sketcher_ConstrainSymmetric.svg
- 04:4804:48, 26 September 2020 diff hist −7 Sketcher Workbench Equal
- 04:4704:47, 26 September 2020 diff hist +4 Sketcher ConstrainEqual File:Sketcher_ConstrainEqual.svg
- 04:4304:43, 26 September 2020 diff hist +58 Sketcher ConstrainPerpendicular File:Sketcher_ConstrainTangent.svg
- 04:3704:37, 26 September 2020 diff hist −5 Sketcher ConstrainParallel File:Sketcher_ConstrainParallel.svg
- 04:3504:35, 26 September 2020 diff hist −69 Sketcher ConstrainHorizontal File:Sketcher_ConstrainHorizontal.svg
- 04:3104:31, 26 September 2020 diff hist +3 Sketcher ConstrainVertical File:Sketcher_ConstrainVertical.svg
- 04:2904:29, 26 September 2020 diff hist +27 Sketcher ConstrainPointOnObject File:Sketcher_ConstrainPointOnObject.svg
- 04:2704:27, 26 September 2020 diff hist −21 Sketcher ConstrainCoincident File:Sketcher_ConstrainCoincident.svg
- 04:2404:24, 26 September 2020 diff hist +46 Sketcher Workbench Update icons: Sketcher_ConstrainCoincident.svg, Sketcher_ConstrainPointOnObject.svg, Sketcher_ConstrainVertical.svg, Sketcher_ConstrainHorizontal.svg, Sketcher_ConstrainParallel.svg, Sketcher_ConstrainPerpendicular.svg. Sketcher_ConstrainTangent.svg, Sketcher_ConstrainEqual.svg, Sketcher_ConstrainSymmetric.svg
- 04:2304:23, 26 September 2020 diff hist +92 N File:Sketcher ConstrainSymmetric.svg Same as "Constraint_Symmetric.svg"; use this name to match the command's name.
- 04:2204:22, 26 September 2020 diff hist +94 N File:Sketcher ConstrainEqual.svg Same as "Constraint_EqualLength.svg"; use this name to match the command's name.
- 04:2004:20, 26 September 2020 diff hist +88 N File:Sketcher ConstrainTangent.svg Same as "Constraint_Tangent.svg"; use this name to match the command name.
- 04:1804:18, 26 September 2020 diff hist +96 N File:Sketcher ConstrainPerpendicular.svg Same as "Constraint_Perpendicular.svg"; use this name to match the command's name.
- 04:1604:16, 26 September 2020 diff hist 0 File:Sketcher ConstrainParallel.svg Vocx uploaded File:Sketcher ConstrainParallel.svg
- 04:1504:15, 26 September 2020 diff hist −53 File:Sketcher ConstrainParallel.svg Remove redirect Tag: Blanking
- 04:1104:11, 26 September 2020 diff hist +8 Sketcher Workbench Button template
- 04:1004:10, 26 September 2020 diff hist +11 Sketcher LeaveSketch Sketcher_LeaveSketch.svg|16px
- 04:0904:09, 26 September 2020 diff hist +94 Sketcher ToggleConstruction {{Button}} icons
- 04:0204:02, 26 September 2020 diff hist +42 Sketcher Extend Button template
- 04:0004:00, 26 September 2020 diff hist 0 File:Sketcher ConstrainCoincident.svg Vocx uploaded File:Sketcher ConstrainCoincident.svg
- 03:5903:59, 26 September 2020 diff hist −55 File:Sketcher ConstrainCoincident.svg Remove redirect Tag: Blanking
- 03:1603:16, 26 September 2020 diff hist +96 N File:Sketcher ConstrainPointOnObject.svg Same as "Constraint_PointOnObject.svg"; use this name to match the command's name.
- 03:1203:12, 26 September 2020 diff hist −7 Sketcher Trimming Button template
- 03:1003:10, 26 September 2020 diff hist +25 Sketcher CreateSlot Button template
- 03:0803:08, 26 September 2020 diff hist +40 Sketcher CreateRegularPolygon Button template
- 03:0703:07, 26 September 2020 diff hist +30 Sketcher CreateOctagon Button template
- 03:0603:06, 26 September 2020 diff hist +31 Sketcher CreateHeptagon Button template
- 03:0503:05, 26 September 2020 diff hist +30 Sketcher CreateHexagon Button template
- 03:0403:04, 26 September 2020 diff hist +31 Sketcher CreatePentagon Button template
- 03:0303:03, 26 September 2020 diff hist +27 Sketcher CreateSquare Button template
- 03:0203:02, 26 September 2020 diff hist +31 Sketcher CreateTriangle Button template
- 02:5802:58, 26 September 2020 diff hist −7 Sketcher CompCreateRegularPolygon No space after the colon
- 02:5602:56, 26 September 2020 diff hist −17 Sketcher CompCreateBSpline Icons proper name
- 02:5502:55, 26 September 2020 diff hist −84 Sketcher CompCreateConic Icons in SVG
- 02:5202:52, 26 September 2020 diff hist +4 Sketcher CompCreateCircle File:Sketcher_Create3PointCircle.svg
- 02:5002:50, 26 September 2020 diff hist +31 Sketcher CreateRectangle File:Sketcher_CreateRectangle.svg
- 02:4902:49, 26 September 2020 diff hist +8 Sketcher CreatePolyline GuiCommand vertical
- 02:4702:47, 26 September 2020 diff hist −12 Sketcher CreatePeriodicBSpline File:Sketcher_CreatePeriodicBSpline.svg
- 02:4502:45, 26 September 2020 diff hist +24 Sketcher CreateBSpline Sketcher_CreateBSpline.svg
- 02:4302:43, 26 September 2020 diff hist −26 Sketcher CreateArcOfParabola File:Sketcher_CreateArcOfParabola.svg
- 02:4102:41, 26 September 2020 diff hist −9 Sketcher CreateArcOfHyperbola File:Sketcher_CreateArcOfHyperbola.svg
- 02:3602:36, 26 September 2020 diff hist +29 Sketcher CreateArcOfEllipse Sketcher_CreateArcOfEllipse.svg
- 02:3502:35, 26 September 2020 diff hist +9 Sketcher CreateEllipseBy3Points Caption template
- 02:3302:33, 26 September 2020 diff hist −17 Sketcher CreateEllipseBy3Points File:Sketcher_CreateEllipseBy3Points.svg, proper icon name
- 02:3102:31, 26 September 2020 diff hist −34 Sketcher CreateEllipseByCenter Name=Sketcher CreateEllipseByCenter, so it finds the icon automatically
- 02:2902:29, 26 September 2020 diff hist −1 Sketcher Create3PointCircle New icon
- 02:2202:22, 26 September 2020 diff hist −4 Sketcher CompCreateArc Update images Sketcher_CreateArc.svg, Sketcher_Create3PointArc.svg
- 02:1002:10, 26 September 2020 diff hist +66 Sketcher MirrorSketch Proper Button and MenuCommand templates
- 02:0802:08, 26 September 2020 diff hist +2 Sketcher Workbench →General: Image:Sketcher_MergeSketches.svg
- 02:0702:07, 26 September 2020 diff hist +48 Sketcher MergeSketches |Name=Sketcher MergeSketches; so it finds the icon automatically
- 02:0602:06, 26 September 2020 diff hist +92 N File:Sketcher MergeSketches.svg Same as "Sketcher_MergeSketch.svg"; use this name to match the command's name.
- 02:0302:03, 26 September 2020 diff hist −9 Sketcher ValidateSketch Remove Empty=1 so that the new icon is displayed
- 02:0202:02, 26 September 2020 diff hist +59 Sketcher ReorientSketch Name of the command is actually "Sketcher ReorientSketch"; then it finds the icon automatically
- 01:5701:57, 26 September 2020 diff hist −16 Sketcher MapSketch Button template
- 01:5601:56, 26 September 2020 diff hist −1 Template:Button Revert the border to 3px so that it looks like a button.
- 01:5201:52, 26 September 2020 diff hist +21 Sketcher ViewSection Button template
- 01:5001:50, 26 September 2020 diff hist +52 Sketcher ViewSketch Icon Sketcher_ViewSketch.svg
- 01:4301:43, 26 September 2020 diff hist +17 Sketcher Workbench General sections
- 01:3801:38, 26 September 2020 diff hist −1 Sketcher Workbench Update: Sketcher_CreatePeriodicBSpline.svg, Sketcher_ToggleConstruction.svg
- 01:3201:32, 26 September 2020 diff hist +104 N File:Sketcher CreatePeriodicBSpline.svg Same as "Sketcher_Create_Periodic_BSpline.svg"; use this name to match the command's name.
- 00:4700:47, 26 September 2020 diff hist +43 Sketcher Workbench Update: Sketcher_CreateLine.svg, Sketcher_CreateArc.svg, Sketcher_CreateCircle.svg, Sketcher_CreateEllipseByCenter.svg, Sketcher_CreateEllipseBy3Points.svg, Sketcher_CreateArcOfEllipse.svg, Sketcher_CreateArcOfHyperbola.svg, Sketcher_CreateArcOfParabola.svg
- 00:4500:45, 26 September 2020 diff hist +100 N File:Sketcher CreateArcOfParabola.svg Same as "Sketcher_CreateParabolic_Arc.svg"; use this name to match the command's name.
- 00:4400:44, 26 September 2020 diff hist +101 N File:Sketcher CreateArcOfHyperbola.svg Same as "Sketcher_CreateHyperbolic_Arc.svg"; use this name to match the command's name.
- 00:4000:40, 26 September 2020 diff hist +102 N File:Sketcher CreateArcOfEllipse.svg Same as "Sketcher_CreateElliptical_Arcs.svg"; use this name to match the command's name.
- 00:3700:37, 26 September 2020 diff hist +100 N File:Sketcher CreateEllipseBy3Points.svg Same as "Sketcher_CreateEllipse_3points.svg"; use this name to match the command name.
- 00:3200:32, 26 September 2020 diff hist +94 N File:Sketcher CreateEllipseByCenter.svg Same as "Sketcher_CreateEllipse.svg"; use this name to match the command's name.
- 00:2500:25, 26 September 2020 diff hist +37 Artwork Sketcher Span instead of div
- 00:2100:21, 26 September 2020 diff hist 0 File:Sketcher ConstrainHorizontal.svg Vocx uploaded File:Sketcher ConstrainHorizontal.svg
- 00:2100:21, 26 September 2020 diff hist −55 File:Sketcher ConstrainHorizontal.svg Remove the redirect Tag: Blanking
- 00:1900:19, 26 September 2020 diff hist 0 File:Sketcher ConstrainVertical.svg Vocx uploaded File:Sketcher ConstrainVertical.svg
- 00:1800:18, 26 September 2020 diff hist −53 File:Sketcher ConstrainVertical.svg Remove redirect Tag: Blanking
- 00:1500:15, 26 September 2020 diff hist +92 Artwork Sketcher Update the icon names
- 00:1200:12, 26 September 2020 diff hist +95 N File:Sketcher Toggle Constraint Driving.svg Icon as it exists in v0.19, although it is not used in the source code currently.
- 00:0900:09, 26 September 2020 diff hist 0 File:Sketcher Toggle Constraint Driven.svg Vocx uploaded a new version of File:Sketcher Toggle Constraint Driven.svg
- 00:0300:03, 26 September 2020 diff hist +52 N File:Sketcher Crosshair.svg Crosshair in SVG in v0.19, not in XPM.
25 September 2020
- 23:5123:51, 25 September 2020 diff hist +48 N File:Constraint Block.svg Proper name of this icon in v0.19.
- 23:5023:50, 25 September 2020 diff hist +41 Sketcher ConstrainBlock Use the proper SVG icon
- 23:4523:45, 25 September 2020 diff hist +20 Artwork Sketcher File:Sketcher_ConstrainCoincident_old.svg, File:Sketcher_ConstrainDistance_old.svg, File:Sketcher_ConstrainHorizontal_old.svg, File:Sketcher_ConstrainParallel_old.svg, File:Sketcher_ConstrainVertical_old.svg rename files to include _old
- 23:4123:41, 25 September 2020 diff hist +53 N File:Sketcher ConstrainVertical.svg Vocx moved page File:Sketcher ConstrainVertical.svg to File:Sketcher ConstrainVertical old.svg: Add _old as it is obsolete and currently not used in the code Tag: New redirect
- 23:4123:41, 25 September 2020 diff hist 0 m File:Sketcher ConstrainVertical old.svg Vocx moved page File:Sketcher ConstrainVertical.svg to File:Sketcher ConstrainVertical old.svg: Add _old as it is obsolete and currently not used in the code
- 23:4023:40, 25 September 2020 diff hist +53 N File:Sketcher ConstrainParallel.svg Vocx moved page File:Sketcher ConstrainParallel.svg to File:Sketcher ConstrainParallel old.svg: Add _old as it is obsolete and currently not used in the code Tag: New redirect
- 23:4023:40, 25 September 2020 diff hist 0 m File:Sketcher ConstrainParallel old.svg Vocx moved page File:Sketcher ConstrainParallel.svg to File:Sketcher ConstrainParallel old.svg: Add _old as it is obsolete and currently not used in the code
- 23:3923:39, 25 September 2020 diff hist +55 N File:Sketcher ConstrainHorizontal.svg Vocx moved page File:Sketcher ConstrainHorizontal.svg to File:Sketcher ConstrainHorizontal old.svg: Add _old as it is obsolete and currently not used in the code Tag: New redirect
- 23:3923:39, 25 September 2020 diff hist 0 m File:Sketcher ConstrainHorizontal old.svg Vocx moved page File:Sketcher ConstrainHorizontal.svg to File:Sketcher ConstrainHorizontal old.svg: Add _old as it is obsolete and currently not used in the code
- 23:3923:39, 25 September 2020 diff hist +53 N File:Sketcher ConstrainDistance.svg Vocx moved page File:Sketcher ConstrainDistance.svg to File:Sketcher ConstrainDistance old.svg: Add _old as it is obsolete and currently not used in the code Tag: New redirect
- 23:3923:39, 25 September 2020 diff hist 0 m File:Sketcher ConstrainDistance old.svg Vocx moved page File:Sketcher ConstrainDistance.svg to File:Sketcher ConstrainDistance old.svg: Add _old as it is obsolete and currently not used in the code
- 23:3823:38, 25 September 2020 diff hist +55 N File:Sketcher ConstrainCoincident.svg Vocx moved page File:Sketcher ConstrainCoincident.svg to File:Sketcher ConstrainCoincident old.svg: Added _old as it is obsolete and currently not used in the code Tag: New redirect
- 23:3823:38, 25 September 2020 diff hist 0 m File:Sketcher ConstrainCoincident old.svg Vocx moved page File:Sketcher ConstrainCoincident.svg to File:Sketcher ConstrainCoincident old.svg: Added _old as it is obsolete and currently not used in the code
- 20:4720:47, 25 September 2020 diff hist 0 File:Sketcher Pointer Create 3PointArc.svg Vocx uploaded a new version of File:Sketcher Pointer Create 3PointArc.svg
- 20:4420:44, 25 September 2020 diff hist +62 Artwork Sketcher Move the header to fourth level
- 20:3120:31, 25 September 2020 diff hist +81 Artwork Sketcher Move icons to general
- 17:5617:56, 25 September 2020 diff hist 0 Artwork Sketcher Distribute icons into the new sections; pull request with this new order will come shortly
- 17:3217:32, 25 September 2020 diff hist 0 File:Sketcher ValidateSketch.svg Vocx uploaded a new version of File:Sketcher ValidateSketch.svg
- 14:4014:40, 25 September 2020 diff hist +56 Migrating to FreeCAD from Fusion360 →Learning Resources: video by Brodie Fairhall.
- 14:3914:39, 25 September 2020 diff hist 0 Migrating to FreeCAD from Fusion360 →FAQ: Proper indented bullet points
- 14:0514:05, 25 September 2020 diff hist +107 Download The package may also be installed from the Chocolatey manager.
- 07:1507:15, 25 September 2020 diff hist +97 Sketcher Workbench File:Sketcher_ReorientSketch.svg, File:Sketcher_ValidateSketch.svg
- 07:1307:13, 25 September 2020 diff hist +74 Artwork Sketcher Sketcher_ReorientSketch.svg, Sketcher_ValidateSketch.svg
- 07:1107:11, 25 September 2020 diff hist +43 N File:Sketcher ValidateSketch.svg New icon introduced in v0.19.
- 07:1107:11, 25 September 2020 diff hist +43 N File:Sketcher ReorientSketch.svg New icon introduced in v0.19.
- 05:3305:33, 25 September 2020 diff hist +166 Sketcher Workbench Diameter: defines the diameter of a selected arc or circle by constraining the radius.
- 05:2405:24, 25 September 2020 diff hist +218 Artwork Sketcher icons/tools/
- 00:4000:40, 25 September 2020 diff hist +81 N File:Sketcher Pointer Trimming.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:4000:40, 25 September 2020 diff hist +81 N File:Sketcher Pointer Slot.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3900:39, 25 September 2020 diff hist +81 N File:Sketcher Pointer Regular Polygon.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3900:39, 25 September 2020 diff hist +81 N File:Sketcher Pointer External.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3900:39, 25 September 2020 diff hist +81 N File:Sketcher Pointer Extension.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3800:38, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Point.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3800:38, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Lineset.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3700:37, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Line.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3700:37, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Fillet.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3600:36, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Ellipse.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM. current
- 00:3600:36, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Circle.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3600:36, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create BSpline.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3600:36, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Box.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3500:35, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create ArcOfParabola.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3500:35, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create ArcOfHyperbola.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3400:34, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create ArcOfEllipse.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3400:34, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create Arc.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3200:32, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create 3PointCircle.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3200:32, 25 September 2020 diff hist +81 N File:Sketcher Pointer Create 3PointArc.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
- 00:3100:31, 25 September 2020 diff hist +81 N File:Sketcher Pointer CarbonCopy.svg Pointer in SVG introduced in v0.19, as opposed to a hard-coded XPM.
24 September 2020
- 22:0222:02, 24 September 2020 diff hist +1,374 Artwork Sketcher Organized the icons in subdirectories; the pull request will be made soon
23 September 2020
- 21:1121:11, 23 September 2020 diff hist +59 User hub If you'd like to contribute to FreeCAD, please donate, and see the Help FreeCAD page for other ways to contribute.
- 21:0921:09, 23 September 2020 diff hist +89 User hub See also: * Migrating to FreeCAD from Fusion360
- 21:0821:08, 23 September 2020 diff hist +19 Getting started See also: Migrating to FreeCAD from Fusion360
- 21:0221:02, 23 September 2020 diff hist +856 Migrating to FreeCAD from Fusion360 Better information, and links, and added the page by ppemawm
- 20:4620:46, 23 September 2020 diff hist +34 Migrating to FreeCAD from Fusion360 →Comparison Videos: Userdocnavi to categorize the page
- 20:4520:45, 23 September 2020 diff hist +182 Migrating to FreeCAD from Fusion360 →Learning Resources: V0.19 Benchmarking--2019 Monthly Challenges, a series of objects created with Fusion360 are remodelled using FreeCAD.
- 15:5815:58, 23 September 2020 diff hist +588 Video tutorials for product design Updated the link and information for Joko Engineering videos
- 15:5515:55, 23 September 2020 diff hist −430 Video tutorials Moved link to the product design page
- 06:0206:02, 23 September 2020 diff hist 0 File:Sketcher ConstrainBlock.svg Vocx uploaded a new version of File:Sketcher ConstrainBlock.svg
22 September 2020
- 18:1018:10, 22 September 2020 diff hist +32 N Sketcher Redirect to the Sketcher Workbench so the link Sketcher can be used from the forum current Tag: New redirect
- 17:0817:08, 22 September 2020 diff hist +4 Donate See other ways to help the project (documentation, translation).
- 17:0717:07, 22 September 2020 diff hist +159 Video tutorials for product design Fusion360 to FreeCAD - Introduction: a quick introduction by Brodie Fairhall for those coming from Fusion360.
- 02:2802:28, 22 September 2020 diff hist +38 FreeCAD and DWG Import {{Draft Tools navi{{#translation:}}}} to categorize the page
21 September 2020
- 23:3823:38, 21 September 2020 diff hist +13 Template:Work in progress Category Template:Text Box, also close the final <noinclude> current
- 23:3723:37, 21 September 2020 diff hist +3 Template:Page in progress Change the Category to Work_in_progress, as it actually exists.
- 23:3423:34, 21 September 2020 diff hist +56 Template:Work in progress File:Under construction icon-blue.svg, Category:Template:Text Box
- 22:0622:06, 21 September 2020 diff hist +11 Flamingo Workbench Currently Dodo Workbench links here.
- 22:0422:04, 21 September 2020 diff hist +34 N External workbench Singular page redirects to plural page, External_workbenches current Tag: New redirect
- 22:0122:01, 21 September 2020 diff hist +15 Tutorials {{TOCright}} template to put the table of contents to the right
- 21:5821:58, 21 September 2020 diff hist +30 Tutorials Link to video tutorials should be first because it's more updated.
- 03:2403:24, 21 September 2020 diff hist +17 Arch Workbench Cut with a line introduced in v0.19
20 September 2020
- 20:4020:40, 20 September 2020 diff hist +30 Topological naming problem stems from the way the internal FreeCAD routines handle updates of the geometrical shapes created with the OCCT kernel
- 04:0304:03, 20 September 2020 diff hist 0 File:BIM setup screenshot.png Vocx uploaded a new version of File:BIM setup screenshot.png current
- 03:5703:57, 20 September 2020 diff hist −155 Arch IFC Simplified the introduction
- 03:5103:51, 20 September 2020 diff hist +95 N File:BIM Setup.svg For the BIM_Setup command in the BIM Workbench. Same as "preferences-system.svg". current
- 03:4203:42, 20 September 2020 diff hist 0 Arch Workbench IFC: industry foundation classes (IfcOpenShell)
- 03:4103:41, 20 September 2020 diff hist +3 m Arch Workbench Commas
- 03:3903:39, 20 September 2020 diff hist +180 BIM Workbench The developers of Draft, Arch and BIM also collaborate with the greater OSArch community, with the ultimate goal of improving building design by using entirely free software.
- 03:2503:25, 20 September 2020 diff hist +408 Arch Workbench The developers of Draft, Arch, and BIM also collaborate with the greater OSArch community with the ultimate goal of improving building design by using entirely free software.
19 September 2020
- 23:5023:50, 19 September 2020 diff hist +118 Assembly Icons for easier reading
- 23:4623:46, 19 September 2020 diff hist +70 Assembly Icons for easier reading
- 23:3423:34, 19 September 2020 diff hist −12 Donate Setting up such a structure represents a huge effort (lawyer, accountant, reports, administrative tasks)
- 20:2820:28, 19 September 2020 diff hist +52 Getting started if you like it, you can donate and help FreeCAD in other ways, such as documentation and translation.
- 20:1820:18, 19 September 2020 diff hist +126 Part Boolean Caption: dialog to select objects and perform boolean operations with them.
- 20:1420:14, 19 September 2020 diff hist −75 Part Boolean Removed UnfinishedDocu template because the explanation is in the individual pages for fuse, cut, common, and section.
- 20:0920:09, 19 September 2020 diff hist +31 Addon Icon File:Std_AddonMgr.svg
- 03:2403:24, 19 September 2020 diff hist −60 Donate {{Userdocnavi{{#translation:}}}} to categorize the page
- 03:2303:23, 19 September 2020 diff hist −138 Donate Rewritten the page to make it easier to find the donation link
- 02:2902:29, 19 September 2020 diff hist +168 N File:Liberapay logo.svg Original icon-v2_white-on-yellow.svg from https://github.com/liberapay/liberapay.com/. For illustrative purposes only. No copyright infringement intended. current
18 September 2020
- 18:2118:21, 18 September 2020 diff hist +819 Part ShapeFromMesh Expanded the scripting section with a complete example
- 17:2117:21, 18 September 2020 diff hist −76 Part ShapeFromMesh Simplified the information
- 17:1317:13, 18 September 2020 diff hist +129 Part ShapeFromMesh Edit STL Files In FreeCAD video by AllVisuals4U.
- 17:1317:13, 18 September 2020 diff hist +10 Video tutorials Button template
- 17:0917:09, 18 September 2020 diff hist +64 Part ShapeFromMesh Appropriate tools are available in the Mesh Workbench
17 September 2020
- 22:1522:15, 17 September 2020 diff hist +2 How to install additional workbenches Simpler
- 22:1222:12, 17 September 2020 diff hist −669 How to install additional workbenches Remove repeated information and banner; keep it simple, this information has already been added to the beginning of the text
- 22:0922:09, 17 September 2020 diff hist +63 How to install additional workbenches This may be necessary if for some reason the Addon Manager doesn't work but you have access to the workbench downloaded as a .zip package.
- 21:3321:33, 17 September 2020 diff hist +176 FreeCAD used in production →U - Z: Forum thread: List of firms/companies/organizations that use FreeCAD in Production or in their workflow
- 21:3221:32, 17 September 2020 diff hist −88 Getting started See also, FreeCAD used in production.
- 18:1118:11, 17 September 2020 diff hist +136 Mesh Workbench See Asymptote to export meshes for the Asymptote format, which can be used inside LaTeX document.
- 18:0918:09, 17 September 2020 diff hist +37 Asymptote →Generating Asymptote code from FreeCAD.: {{Mesh Tools navi}} {{Userdocnavi}} to categorize the page
- 18:0718:07, 17 September 2020 diff hist +1 User talk:Jruiz No edit summary current
- 18:0718:07, 17 September 2020 diff hist +471 N User talk:Jruiz Created page with "In the Asymptote page please leave more vertical white space, that is, empty lines between the paragraphs. You are packing everything in a wall of text, making the code ve..."
16 September 2020
- 16:2016:20, 16 September 2020 diff hist +23 PartDesign AdditiveLoft Use Button not KEY template
- 16:1916:19, 16 September 2020 diff hist +45 PartDesign AdditiveLoft Select the next sketch in the 3D view
15 September 2020
- 21:2521:25, 15 September 2020 diff hist −4 Arch IFC IfcOpenShell, more information on installing this library.
- 21:2121:21, 15 September 2020 diff hist +221 Arch IFC More information
- 21:0821:08, 15 September 2020 diff hist −15 Arch IFC Small changes; list of import types
- 20:5620:56, 15 September 2020 diff hist 0 IfcOpenShell Compiling IfcOpenShell for MacOS
- 20:4320:43, 15 September 2020 diff hist −1,514 Arch IFC Remove Installing section as the information is already described in IfcOpenShell.
- 20:4020:40, 15 September 2020 diff hist −46 Arch IFC →Description: The old importer is still included in the source code but as of v0.19 it is not recommended at all;
- 20:3220:32, 15 September 2020 diff hist −2,335 Arch IFC "Remove obtaining IfcOpenShell" as the process has already been described in IfcOpenShell
14 September 2020
- 17:3917:39, 14 September 2020 diff hist −50 Compile on MacOS For other platforms, see Compiling.
- 17:3817:38, 14 September 2020 diff hist +104 Compile on MacOS This information is very outdated, as currently, FreeCAD for MacOS is created using Conda. If you are able to update these instructions, discuss it in the forum.
- 17:2217:22, 14 September 2020 diff hist +1,239 Std Placement A placement is internally defined by a matrix; in many cases it is simpler to represent it by means of two components, a Base point, and a Rotation value. More information to scripting.
- 16:5316:53, 14 September 2020 diff hist +208 Std Placement The dialog can also be launched by clicking on the ellipsis button ... that appears in the property editor when you click on the Placement property.
- 05:2305:23, 14 September 2020 diff hist +176 Template:Std Base navi Std LinkMakeRelative, Std LinkReplace, Std LinkUnlink, Std LinkImport, Std LinkImportAll
- 05:1405:14, 14 September 2020 diff hist +283 Std LinkMake Left: Std Part with two objects, and two Links to the Part; the visibility of the objects is synchronized. Right: Std Group with two objects, and two Links to the Group; the visibility of the objects is independently controlled in each group.
- 05:0605:06, 14 September 2020 diff hist 0 File:Std Link tree Std Group visibility.png Vocx uploaded a new version of File:Std Link tree Std Group visibility.png current
- 05:0305:03, 14 September 2020 diff hist 0 File:Std Link tree Std Part visibility.png Vocx uploaded a new version of File:Std Link tree Std Part visibility.png current
- 04:5804:58, 14 September 2020 diff hist +480 Std LinkMake A Link to a Std_Part will keep the visibility of the objects synchronized with the original Part. On the other hand a Link to a Std_Group will allow independent control of the visibilities.
- 04:2904:29, 14 September 2020 diff hist +137 N File:Std Link tree Std Group visibility.png A Link of the Std_Group will allow the visibility status of the objects inside of it to be independently turned on and off.
- 04:2404:24, 14 September 2020 diff hist +97 N File:Std Link tree Std Part visibility.png A Link of the Std_Part will synchronize the visibility of the objects inside of it.
- 03:4503:45, 14 September 2020 diff hist 0 File:Std Link Std Part visibility example.png Vocx uploaded a new version of File:Std Link Std Part visibility example.png current
- 03:4503:45, 14 September 2020 diff hist 0 File:Std Link Std Part visibility example 3D.png Vocx uploaded a new version of File:Std Link Std Part visibility example 3D.png current
- 03:3803:38, 14 September 2020 diff hist +751 Std LinkMake →Visibility: A Std Part containing three objects, and a Link to that Part; in the Link, (1) the first object is made invisible, (2) the second object has some subelements with different colors, (3) the entire third object has a different color and level of transparency.
- 03:0503:05, 14 September 2020 diff hist +142 N File:Std Link Std Part visibility example 3D.png Std_Part with three objects, and Link to that Std_Part. In this Link the visibility and appearance of the objects is overridden.
- 03:0103:01, 14 September 2020 diff hist +234 N File:Std Link Std Part visibility example.png Element color dialog that is available when opening the context menu of a Link object in the tree view. Example with Link to a Std_Part, which overrides the appearance and visibility of different objects and subelements.
- 02:2102:21, 14 September 2020 diff hist −1 Std LinkMake Link Array section
- 02:2002:20, 14 September 2020 diff hist +16 Std LinkMake This "Link Array" object can also be created with the different array tools of the Draft Workbench
- 01:3301:33, 14 September 2020 diff hist +37 Std LinkMake →Visibility: You can click OK to confirm the operation and close the dialog.
- 00:3200:32, 14 September 2020 diff hist +1,326 Std LinkMake Visibility section: Element color dialog that is available when opening the context menu of a Link object in the tree view.
- 00:0500:05, 14 September 2020 diff hist +117 N File:Std Link array visibility example.png Element color dialog that is available when opening the context menu of a Link object in the tree view. current
13 September 2020
- 21:2221:22, 13 September 2020 diff hist +1,270 Std LinkMake →Link Arrays: (1) Caption: Original object, and (2, 3, 4) a Link array with three elements, each in a different position. The first Link has overridden material and transparent faces, the other two have custom face colors.
- 20:3820:38, 13 September 2020 diff hist +183 N File:Std Link array example.png Original object, a Link array with three elements, each in a different position. The first Link has overridden material and faces, the other two have custom face colors. current
- 20:3720:37, 13 September 2020 diff hist +172 N File:Std Link tree array example.png Tree view of an original object, a Link array with three elements, which can be placed individually, and their appearance can be controlled also individually. current
- 19:0419:04, 13 September 2020 diff hist +900 Std LinkMake →Overriding appearance: Link Arrays each element of the array can have its own appearance changed, either by the Override Material and Shape Material properties,
- 18:3418:34, 13 September 2020 diff hist +16 Std LinkMake →Overriding appearance: Caption: (1) An original object, (2) a Link with overriding material, and (3) a second Link with individual modified subelements.
- 18:2918:29, 13 September 2020 diff hist +6 Std LinkMake →Overriding appearance: Image width 500px
- 18:2718:27, 13 September 2020 diff hist +118 N File:Std Link override color example.png An original object, a Link with overriding material, a second Link with individual modified subelements. current
- 18:2218:22, 13 September 2020 diff hist +1,419 Std LinkMake →Usage: groups: Overriding appearance: An original object, a Link with overriding material, a second Link with individual modified subelements.
- 05:4605:46, 13 September 2020 diff hist −956 Release notes 0.19 Remove Geomatics Workbench section as it's been merged into Trails
- 05:4605:46, 13 September 2020 diff hist +13 Release notes 0.19 Translation unit for Geomatics
- 05:4405:44, 13 September 2020 diff hist +1,008 Release notes 0.19 Move Geomatics inside Trails
- 05:3405:34, 13 September 2020 diff hist 0 File:Draft architecture.svg Vocx uploaded a new version of File:Draft architecture.svg current
- 05:3305:33, 13 September 2020 diff hist +47 Release notes 0.19 Draft Workbench: Most refactoring is complete, but there is still room for improving many aspects of the workbench.
- 05:2705:27, 13 September 2020 diff hist −12 Release notes 0.19 Spacing to the last item in the table
- 05:2305:23, 13 September 2020 diff hist +154 N File:Macro recently used.png In v0.19 the Macro menu now shows a shortcut to recently used macros, which can be called with a key combination, for example, Ctrl+Shift+1. current
- 05:2305:23, 13 September 2020 diff hist +448 Release notes 0.19 The Macro menu now shows a shortcut to recently used macros, which can be called with a key combination, for example, Ctrl+Shift+1
- 05:2205:22, 13 September 2020 diff hist +17 Std Macro Menu {{Version|0
- 05:1705:17, 13 September 2020 diff hist +217 Std Macro Menu Recent macros: shows a list of macros recently used, which can be called with a key combination, for example, Ctrl+Shift+1. This can be configured in the Preferences.
- 02:3302:33, 13 September 2020 diff hist +195 Std LinkMakeRelative Image: Original body, and three Links created from the subelements of it, including edges and faces.
- 02:2002:20, 13 September 2020 diff hist +115 N File:Std Link sublink example.png Original object and three Links created from its subelements, using the Std_LinkMakeRelative command. current
- 02:2002:20, 13 September 2020 diff hist +136 N File:Std Link tree sublink example.png Tree view showing an original object and three Links created from its subelements, using the Std_LinkMakeRelative command. current
- 01:1501:15, 13 September 2020 diff hist 0 File:Std Link tree import all 1 example.png Vocx uploaded a new version of File:Std Link tree import all 1 example.png current
- 01:1201:12, 13 September 2020 diff hist +263 Std LinkImportAll →Description: Usage section: Left: various Links that point to objects in the "source" document. Right: the original objects were imported (copied) into the "target" document
- 01:0801:08, 13 September 2020 diff hist +218 N File:Std Link tree import all 2 example.png Example for the command Std_LinkImportAll. Various Links to objects in a target document. The original objects were imported into this target document, so they are no longer linked to the source document. current
- 01:0301:03, 13 September 2020 diff hist +142 N File:Std Link tree import all 1 example.png Example for the command Std_LinkImportAll. Various Links to objects in a target document. The original objects will be imported.
- 00:5700:57, 13 September 2020 diff hist +367 Std LinkImportAll →Description: Left: various Links that point to objects in the "source" document. Right: the original objects were imported (copied) into the "target" document
- 00:3400:34, 13 September 2020 diff hist −3 m Std LinkImport →Usage: Remove lines
- 00:2500:25, 13 September 2020 diff hist 0 File:Std Link tree import 1 example.png Vocx uploaded a new version of File:Std Link tree import 1 example.png current
- 00:2300:23, 13 September 2020 diff hist +382 Std LinkImport →Usage: Left: a Link points to the object in the "source" document. Right: the original object was imported (copied) into the "target" document, and the existing Link was changed to point to this copy, so it no longer points to the object in "source"
- 00:1600:16, 13 September 2020 diff hist +202 N File:Std Link tree import 2 example.png Example for the command Std_LinkImport. A Link to a Part in a target document. The original object was imported into this target document, so it is no longer linked to the source document. current
- 00:1500:15, 13 September 2020 diff hist +130 N File:Std Link tree import 1 example.png Example for the command Std_LinkImport. A Link to a Part in a target document. The original object will be imported.
12 September 2020
- 23:4123:41, 12 September 2020 diff hist +11 Std LinkReplace →Description: Button Part_Button
- 23:1823:18, 12 September 2020 diff hist +91 N File:Std Link tree replace part 1 examples.png Example for Std_LinkReplace. An internal object would be replaced for a Link. current
- 23:1723:17, 12 September 2020 diff hist +100 N File:Std Link tree replace fuse 1 example.png Example for Std_LinkReplace. An internal object replaced would be replaced for a Link. current
- 23:1323:13, 12 September 2020 diff hist +368 Std LinkReplace →Usage: An object inside another one is replaced by a Link; the Link is now inside, and the real object is placed outside.
- 23:0423:04, 12 September 2020 diff hist +60 N File:Std Link tree replace 2 example.png Vocx moved page File:Std Link tree replace 2 example.png to File:Std Link tree replace part 2 examples.png: Part example current Tag: New redirect
- 23:0423:04, 12 September 2020 diff hist 0 m File:Std Link tree replace part 2 examples.png Vocx moved page File:Std Link tree replace 2 example.png to File:Std Link tree replace part 2 examples.png: Part example current
- 23:0323:03, 12 September 2020 diff hist +59 N File:Std Link tree replace 1 example.png Vocx moved page File:Std Link tree replace 1 example.png to File:Std Link tree replace fuse 2 example.png: Fuse example current Tag: New redirect
- 23:0323:03, 12 September 2020 diff hist 0 m File:Std Link tree replace fuse 2 example.png Vocx moved page File:Std Link tree replace 1 example.png to File:Std Link tree replace fuse 2 example.png: Fuse example current
- 23:0023:00, 12 September 2020 diff hist +279 Std LinkUnlink →Usage: Images, a Link inside another object is unlinked, and the real object is placed inside instead.
- 22:5522:55, 12 September 2020 diff hist +129 N File:Std Link tree unlink 2 example.png A Link inside another object is unlinked, and the real object is placed inside instead. Example for Std_LinkUnlink. current
- 22:5522:55, 12 September 2020 diff hist +129 N File:Std Link tree unlink 1 example.png A Link inside another object is unlinked, and the real object is placed inside instead. Example for Std_LinkUnlink. current
- 22:4122:41, 12 September 2020 diff hist +16 Std LinkReplace →Usage: Images for the examples
- 22:3822:38, 12 September 2020 diff hist 0 m File:Std Link tree replace part 2 examples.png Vocx moved page File:Std Link tree replace 2.png to File:Std Link tree replace 2 example.png: It is an example.
- 22:3722:37, 12 September 2020 diff hist 0 m File:Std Link tree replace fuse 2 example.png Vocx moved page File:Std Link tree replace 1.png to File:Std Link tree replace 1 example.png: It is an example.