Sketcher Усечь (Обрезать)

From FreeCAD Documentation
Revision as of 04:41, 18 October 2019 by Mad max (talk | contribs) (Created page with "==Описание==")

Обрезать

Системное название
Sketcher Trim edge
Расположение в меню
Эскиз → Геометрия эскиза → Обрезать
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
0.12
См. также
Sketcher Продлить

Описание

This tool trims an edge to the nearest overlapping edge.

How to use

  1. Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.