Sketcher Усечь (Обрезать)

From FreeCAD Documentation
Revision as of 03:26, 12 November 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Sketcher Trimming

Системное название
Sketcher Trimming
Расположение в меню
Sketch → Геометрия эскиза → Обрезать кривую
Верстаки
Sketcher, PartDesign
Быстрые клавиши
T R
Представлено в версии
-
См. также
Нет

Description

This tool trims an edge to the nearest overlapping edge.

How to use

  1. Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.