Sketcher "Переключить ограничения в построительные/основные"
Outdated translations are marked like this.
|
|
| Системное название |
|---|
| Sketcher_ToggleDrivingConstraint |
| Расположение в меню |
| Sketch → Ограничения эскиза → Переключить ограничения в построительные/основные |
| Верстаки |
| Sketcher |
| Быстрые клавиши |
| Нет |
| Представлено в версии |
| 0.16 |
| См. также |
| Переключить построительную геометрию |
Описание
The 
Sketcher ToggleDrivingConstraint tool either toggles the dimensional constraint creation tools between driving and reference mode, or toggles selected dimensional constraints between those modes.
Contrary to driving constraints, reference constraints do not constrain the sketch, their value depends on other constraints, they are driven. They can be useful to verify measurements. They can be used in expressions, but not in the sketch itself.
A horizontal distance constraint (50 mm), a vertical constraint (30 mm) and an angle constraint (75°) were set to define the profile; a reference dimension was added on the slanted line segment to know its length (31.0583 mm).
Применение
Toggle tools
- Make sure no dimensional constraints have been selected.
- There are several ways to invoke the tool:
- Press the
Toggle driving/reference constraint button. - Select the Sketch → Sketcher constraints → Toggle driving/reference constraint option from the menu.
- Use the keyboard shortcut: K then X.
- Press the
- The mode of the dimensional constraint creation tools is toggled:
- In driving mode their menu and toolbar icons are red, and they create driving constraints (default color red). The icon of this tool is then:
. - In reference mode their menu and toolbar icons are blue, and they create reference constraints (default color blue). The icon of this tool is then:
.
- In driving mode their menu and toolbar icons are red, and they create driving constraints (default color red). The icon of this tool is then:
Toggle constraints
- Select one or more dimensional constraints.
- Invoke the tool as described above, or with one of the following additional options:
- introduced in version 0.22: Right-click in the 3D view and select the Toggle driving/reference constraint option from the context menu.
- Right-click in the Constraints section of the Sketcher Dialog and select the Toggle to/from reference option from the context menu.
- introduced in version 0.22: Right-click in the 3D view and select the
- The selected constraints are changed from driving to reference mode or vice versa. Their appearance changes accordingly.
- The mode of the dimensional constraint creation tools is not changed.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web