Sketcher ToggleConstruction
Sketcher AlterConstruction |
Ubicación en el Menú |
---|
Croquizador → Geometrías del Croquizador → Conmutar líneas coinstrucción |
Entornos de trabajo |
Croquizador, Diseño de Piezas |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Ninguno |
Descripción
Esta herramienta conmuta el modo de construcción de la geometría del Croquizador. Se puede utilizar sobre cualquier tipo de geometría: Línea, arco o circunferencia.
Construction geometry is an important tool of the sketcher. When using a sketch for a 3D operation, construction geometry is ignored.
In sketch edit mode, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you exit the sketch mode, construction geometry is hidden on the screen.
Note: starting with v0.13, construction lines can be used as rotation axis by the PartDesign Revolve feature.
Usage
- Select one or more sketch geometry in the 3D view, then click on the tool or access it in the menu.