Sketcher: Seleziona i vincoli ridondanti

From FreeCAD Documentation
Revision as of 13:53, 16 December 2018 by Renatorivo (talk | contribs)

Seleziona i vincoli ridondanti

Posizione nel menu
Sketch → Strumenti → Seleziona i vincoli ridondanti
Ambiente
Sketcher
Avvio veloce
Shift+Ctrl+R
Introdotto nella versione
0.15
Vedere anche
Nessuno

Descrizione

Uso

  1. Entrare in modalità di modifica del disegno.
  2. Scegliere Sketch Strumenti Seleziona i vincoli ridondanti dal menu in alto.
  3. Vengono selezionati i vincoli che nello schizzo sono ridondanti.
  1. Enter edit mode of sketch.
  2. Choose Sketch Sketcher tools Select Redundant Constraints from the top menu.
  3. The redundant constraints of the sketch will be selected.