Sketcher SelectElementsWithDoFs/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Questo strumento ha lo scopo di aiutare a vincolare completamente uno schizzo evidenziando in verde gli elementi dello schizzo con residui gradi di libertà (DoF).")
(Created page with "== Utilizzo ==")
Line 12: Line 12:
Questo strumento ha lo scopo di aiutare a vincolare completamente uno schizzo evidenziando in verde gli elementi dello schizzo con residui gradi di libertà (DoF).
Questo strumento ha lo scopo di aiutare a vincolare completamente uno schizzo evidenziando in verde gli elementi dello schizzo con residui gradi di libertà (DoF).


==How to use==
== Utilizzo ==


# In the Solver messages box located at the top of the Tasks tab, the following message should be displayed: <blockquote>Under-constrained sketch with <span style="color:blue;text-decoration:underline;">X degrees</span> of freedom</blockquote> where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
# In the Solver messages box located at the top of the Tasks tab, the following message should be displayed: <blockquote>Under-constrained sketch with <span style="color:blue;text-decoration:underline;">X degrees</span> of freedom</blockquote> where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.

Revision as of 22:26, 15 November 2018

Seleziona il Risolutore dei gradi di libertà

Posizione nel menu
Sketch → Strumenti → Seleziona il Risolutore dei gradi di libertà
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
0.18
Vedere anche
Nessuno

Descrizione

Questo strumento ha lo scopo di aiutare a vincolare completamente uno schizzo evidenziando in verde gli elementi dello schizzo con residui gradi di libertà (DoF).

Utilizzo

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:

    Under-constrained sketch with X degrees of freedom

    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.