Sketcher SelectElementsWithDoFs/es

From FreeCAD Documentation
Revision as of 15:45, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Ubicación en el Menú
Sketch → Herramientas de croquis → Select solver DoFs
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
0.18
Ver también
None


Descripción

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

How to use

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:
    Under-constrained sketch with X degrees of freedom
    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.