Sketcher SelectConstraints/ro: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
Renatorivo (talk | contribs) (Created page with "Selectați constrângerile unui element al schiței.") |
||
Line 4: | Line 4: | ||
==Descriere== |
==Descriere== |
||
Selectați constrângerile unui element al schiței. |
|||
Selects the constraints of a sketcher element. |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
Revision as of 22:45, 12 December 2018
Sketcher SelectConstraints |
poziția meniului |
---|
Sketch → Sketcher tools → Select Constraints |
Ateliere |
Sketcher |
scurtătură |
Shift+Ctrl+C |
Prezentat în versiune |
0.15 |
A se vedea, de asemenea, |
nici unul |
Descriere
Selectați constrângerile unui element al schiței.
Utilizați
- Select sketcher element in the Tasks-Panel or in the 3D-View.
- Click on or choose Sketch → Sketcher tools → Select Constraints from the top menu.
- The associated constraints will be highlighted in the Tasks-Panel.
Note
Nu funcționează cu constrângeri Point-on-Object constraints. Disponibil începând cu FreeCAD v 0.15.
Does not work with Point-on-Object constraints. Available since FreeCAD v 0.15.