Sketcher NewSketch/pt: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/pt|Name=Sketcher NewSketch|Name/pt=Sketcher NewSketch|Workbenches=Sketcher, PartDesign|MenuLocation=Sketch ...") |
(Updating to match new version of source page) |
||
Line 2: | Line 2: | ||
====Description==== |
====Description==== |
||
This will create a new sketch. |
|||
====Usage==== |
====Usage==== |
||
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the |
|||
* XY-Plane |
|||
* XZ-Plane |
|||
* YZ-Plane |
|||
You can change an offset to any of the three planes and the side of the offset. |
|||
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face. |
|||
====Note==== |
====Note==== |
||
The sketch can be re-mapped to antoher already existing face. |
|||
The sketch can be moved in the 3D-Space using [[Placement]]. |
|||
Revision as of 21:47, 25 November 2014
Sketcher NewSketch |
Localização do menu |
---|
Sketch → Create sketch |
Bancadas de trabalho |
Sketcher, PartDesign |
Atalho padrão |
Nenhum |
Introduzido na versão |
- |
Veja também |
Nenhum |
Description
This will create a new sketch.
Usage
Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
- XY-Plane
- XZ-Plane
- YZ-Plane
You can change an offset to any of the three planes and the side of the offset.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Note
The sketch can be re-mapped to antoher already existing face.
The sketch can be moved in the 3D-Space using Placement.