Sketcher: Crea schizzo

From FreeCAD Documentation
Revision as of 21:50, 25 November 2014 by Renatorivo (talk | contribs) (Created page with "Lo schizzo può essere spostato nello spazio 3D utilizzando Posizionamento.")

Crea Schizzo

Posizione nel menu
Part design → Crea uno sketch
Ambiente
Sketcher, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Mappa schizzo, Riposiziona schizzo

Description

This will create a new sketch.

Usage

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to antoher already existing face.

Lo schizzo può essere spostato nello spazio 3D utilizzando Posizionamento.