Sketcher NewSketch/it: Difference between revisions

Revision as of 13:59, 30 March 2019

Other languages:

Posizione nel menu
Crea Schizzo
Part design → Crea uno sketch
Ambiente
Sketcher, PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Mappa schizzo, Riposiziona schizzo

Questo strumento crea un nuovo schizzo.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

Cliccando sull'icona senza una faccia (pre) selezionata appare una finestra di dialogo che chiede se lo schizzo deve essere disegnato sul

È possibile assegnare un offset su uno qualsiasi dei tre piani e definire il lato dell'offset.

Facendo clic sull'icona con una faccia preselezionata, lo schizzo viene mappato sulla faccia selezionata.

Lo schizzo può essere rimappato su un'altra faccia esistente usando il comando Mappa schizzo.

Lo schizzo può essere spostato nello spazio 3D utilizzando Posizionamento.

General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation

Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry

Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint

Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints

Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves

Getting started
Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

Help: Tutorials, Video tutorials
Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

@@ Line 2: / Line 2: @@
 {{Docnav||[[Sketcher_EditSketch|Edit sketch]]|[[Sketcher_Workbench|Sketcher]]|IconL=|IconC=Workbench_Sketcher.svg|IconR=Sketcher_EditSketch.png}}
+<div class="mw-translate-fuzzy">
 {{GuiCommand/it|Name=Sketcher NewSketch|Name/it=Crea Schizzo|Workbenches=[[Sketcher Workbench/it|Sketcher]], [[PartDesign Workbench/it|PartDesign]]|MenuLocation=Part design → Crea uno sketch|SeeAlso=[[Sketcher_MapSketch/it|Mappa schizzo]], [[Sketcher_Reorient/it|Riposiziona schizzo]]}}
+</div>
 ==Descrizione==
 Questo strumento crea un nuovo [[Sketcher Workbench/it|schizzo]].
+Note that the [[PartDesign Workbench|PartDesign workbench]] has its own [[PartDesign NewSketch|new sketch]] command, when using PartDesign it is preferable to use its own dedicated tool.
 == Utilizzo ==