Sketcher NewSketch

From FreeCAD Documentation
Revision as of 15:00, 30 March 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎中文(中国大陆)‎

Sketcher NewSketch.svg {{{Name/es}}}

Ubicación en el Menú
Croquizador→ Crear croquis
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
None
Introducido en versión
-
Ver también
Sketcher MapSketch, Sketcher Reorient


Descripción

This will create a new sketch.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

Utilización

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command

The sketch can be moved in the 3D-Space using Placement.