Difference between revisions of "Sketcher NewSketch/es"

From FreeCAD Documentation
Jump to: navigation, search
Line 10: Line 10:
 
}}
 
}}
  
<div class="mw-translate-fuzzy">
+
==Descripción==
====Descripción====
 
</div>
 
  
 
This will create a new [[Sketcher Workbench|sketch]].
 
This will create a new [[Sketcher Workbench|sketch]].

Revision as of 15:15, 30 March 2019

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎中文(中国大陆)‎

Sketcher NewSketch.svg Crear croquis

Ubicación en el Menú
Sketch → Crear croquis
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
-
Ver también
Trazar croquis en cara..., Reorientar croquis...


Descripción

This will create a new sketch.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

Utilización

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D-Space using Placement.