Sketcher NewSketch/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 5: Line 5:
====Descripción====
====Descripción====
</div>
</div>

This will create a new [[Sketcher Workbench|sketch]].


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
====Utilización====
====Utilización====
</div>
</div>

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the
* XY-Plane
* XZ-Plane
* YZ-Plane
You can change an offset to any of the three planes and the side of the offset.


Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.
Line 15: Line 23:
====Note====
====Note====
</div>
</div>

The sketch can be re-mapped to another already existing face using the [[Sketcher MapSketch|Map Sketch - Command]]


The sketch can be moved in the 3D-Space using [[Placement]].
The sketch can be moved in the 3D-Space using [[Placement]].


[[Category:Sketcher]]

Revision as of 22:32, 25 November 2018

Sketcher NewSketch

Ubicación en el Menú
Croquizador→ Crear croquis
Entornos de trabajo
Croquizador, Diseño de Piezas
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Sketcher MapSketch, Sketcher Reorient

Descripción

This will create a new sketch.

Utilización

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command

The sketch can be moved in the 3D-Space using Placement.